최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Corrosion science, v.132, 2018년, pp.300 - 309
Li, Shengxi (Department of Chemical and Biomolecular Engineering, Corrosion Engineering Program, The University of Akron) , Khan, Haris Ali (Department of Industrial and Manufacturing Engineering, Penn State University) , Hihara, Lloyd H. (Department of Mechanical Engineering, University of Hawaii at Manoa) , Cong, Hongbo (Department of Chemical and Biomolecular Engineering, Corrosion Engineering Program, The University of Akron) , Li, Jingjing (Department of Industrial and Manufacturing Engineering, Penn State University)
Abstract This paper investigated the corrosion behavior of Al/CFRP (carbon fiber-reinforced plastic) and Mg/CFRP FSBR (friction stir blind riveting) joints after six-month exposure to a marine environment. It was found that Mg in the Mg/CFRP joint experienced severe uniform corrosion in most region...
Int. J. Adv. Manuf. Technol. Min 76 1403 2015 10.1007/s00170-014-6364-8 Friction stir blind riveting of carbon fiber-reinforced polymer composite and aluminum alloy sheets
J. Achiev. Mater. Manuf. Eng. Hufenbach 20 119 2007 Optimisation of the rivet joints of the CFRP composite material and aluminium alloy
Mater. Des. Jung 47 179 2013 10.1016/j.matdes.2012.12.015 Laser direct joining of carbon fiber reinforced plastic to zinc-coated steel
Sci. Technol. Weld. Join. Jung 16 676 2011 10.1179/1362171811Y.0000000060 Laser direct joining of carbon fibre reinforced plastic to stainless steel
Compos. Struct. Anyfantis 96 858 2013 10.1016/j.compstruct.2012.08.056 Loading and fracture response of CFRP-to-steel adhesively bonded joints with thick adherents ?part II: numerical simulation
Wang 2011 Friction Stir Rivet Method of Joining
J. Mater. Process. Technol. Min 215 20 2015 10.1016/j.jmatprotec.2014.08.005 Friction stir blind riveting for aluminum alloy sheets
SAE Int. J. Mater. Manuf. Lathabai 4 589 2011 10.4271/2011-01-0477 Friction stir blind riveting: a novel joining process for automotive light alloys
J. Mater. Process. Technol. Min 222 268 2015 10.1016/j.jmatprotec.2015.02.011 Mechanics in frictional penetration with a blind rivet
Procedia Eng. Min 81 2036 2014 10.1016/j.proeng.2014.10.277 Mechanical property of Al alloy joints by friction stir blind riveting
Adv. Mater. Res. Zhang 183-185 1616 2011 10.4028/www.scientific.net/AMR.183-185.1616 A technological study on friction stir blind rivet jointing of AZ31 B magnesium alloys and high-strength DP600 steel
Adv. Mater. Res. Zhang 228-229 427 2011 Lap joint properties of FSBRed dissimilar metals AZ31 Mg alloy and DP600 high-strength steel with various parameters
Corros. Sci. Li 111 793 2016 10.1016/j.corsci.2016.05.009 Marine atmospheric corrosion of Al-Mg joints by friction stir blind riveting
Corros. Sci. Deshpande 62 184 2012 10.1016/j.corsci.2012.05.013 Effect of aluminium spacer on galvanic corrosion between magnesium and mild steel using numerical model and SVET experiments
Corros. Sci. Deshpande 52 3514 2010 10.1016/j.corsci.2010.06.031 Validated numerical modelling of galvanic corrosion for couples: magnesium alloy (AE44)-mild steel and AE44-aluminium alloy (AA6063) in brine solution
Corros. Sci. Song 46 955 2004 10.1016/S0010-938X(03)00190-2 Galvanic corrosion of magnesium alloy AZ91D in contact with an aluminium alloy, steel and zinc
J. Mater. Sci. Arronche 48 1315 2013 10.1007/s10853-012-6876-2 Investigation of galvanic corrosion between AISI 1018 carbon steel and CFRPs modified with multi-walled carbon nanotubes
App. Surf. Sci. Liu 314 233 2014 10.1016/j.apsusc.2014.06.072 Electrochemical characteristics of a carbon fibre composite and the associated galvanic effects with aluminium alloys
Corros. Sci. Mandel 73 172 2013 10.1016/j.corsci.2013.03.033 Determination of pitting sensitivity of the aluminium alloy EN AW-6060-T6 in a carbon-fibre reinforced plastic/aluminium rivet joint by finite element simulation of the galvanic corrosion process
Corros. Sci. Palani 78 89 2014 10.1016/j.corsci.2013.09.003 Validation of predictive model for galvanic corrosion under thin electrolyte layers: an application to aluminium 2024-CFRP material combination
J. Electrochem. Soc. Li 161 C268 2014 10.1149/2.071405jes Aerosol salt particle deposition on metals exposed to marine environments: a study related to marine atmospheric corrosion
J. Electrochem. Soc. Li 162 C495 2015 10.1149/2.0881509jes A micro-Raman spectroscopic study of marine atmospheric corrosion of carbon steel: the effect of akaganeite
Jones 1996 Principles and Prevention of Corrosion
ASTM A653 2011 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
ASTM G5 ? 14 2011 Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements
2012 ISO 9225: Corrosion of Metals and Alloys. Corrosivity of Atmospheres. Measurement of Environmental Parameters Affecting Corrosivity of Atmospheres
2009 ISO 8407: Corrosion of Metals and Alloys. Removal of Corrosion Products from Corrosion Test Specimens
Corros. Sci. Cui 76 243 2013 10.1016/j.corsci.2013.06.047 Atmospheric corrosion of field-exposed AZ31 magnesium in a tropical marine environment
Corros. Sci. Jonsson 49 1540 2007 10.1016/j.corsci.2006.08.004 Corrosion product formation during NaCl induced atmospheric corrosion of magnesium alloy AZ91D
Corros. Sci. Jonsson 50 1406 2008 10.1016/j.corsci.2007.12.005 Atmospheric corrosion of field-exposed magnesium alloy AZ91D
Mineral. Mag. Canterford 48 437 1984 10.1180/minmag.1984.048.348.15 Some observations on the properties of dypingite, Mg5(CO3)4(OH)2·5H2O, and related minerals
Can. Mineral. Frueh 9 51 1967 Crystal structure of dawsonite NaAl(CO3)(OH)2
J. Electrochem. Soc. Le Bozec 149 B403 2002 10.1149/1.1497172 Investigation of filiform corrosion on coated aluminum alloys by FTIR microspectroscopy and scanning Kelvin probe
Clay Miner. Rodgers 24 531 1989 10.1180/claymin.1989.024.3.06 Bayerite, Al(OH)3, from Raoul island, Kermadec group, South Pacific
Corros. Sci. Liao 71 53 2013 10.1016/j.corsci.2013.02.003 Atmospheric corrosion of two field-exposed AZ31 B magnesium alloys with different grain size
Corros. Sci. Esmaily 90 420 2015 10.1016/j.corsci.2014.10.040 Influence of temperature on the atmospheric corrosion of the Mg-Al alloy AM50
Corros. Sci. Pardo 48 3035 2006 10.1016/j.corsci.2005.10.008 Influence of Ce surface treatments on corrosion behaviour of A3xx.x/SiCp composites in 3.5 wt.% NaCl
Corros. Sci. Garcia-Romero 51 1263 2009 10.1016/j.corsci.2009.03.006 Corrosion behaviour of several aluminium alloys in contact with a thermal storage phase change material based on Glauber’s salt
Corros. Sci. Song 65 322 2012 10.1016/j.corsci.2012.08.037 The effect of Zn concentration on the corrosion behavior of Mg-xZn alloys
Corros. Sci. Zhang 53 3747 2011 10.1016/j.corsci.2011.07.021 The effect of epoxy coating containing emeraldine base and hydrofluoric acid doped polyaniline on the corrosion protection of AZ91D magnesium alloy
Corros. Sci. Lu 91 287 2015 10.1016/j.corsci.2014.11.029 Super-hydrophobic film fabricated on aluminium surface as a barrier to atmospheric corrosion in a marine environment
Corros. Sci. Li 112 596 2016 10.1016/j.corsci.2016.08.022 Passivation and potential fluctuation of Mg alloy AZ31 B in alkaline environments
Corrosion Rosenfeld 20 115t 1964 10.5006/0010-9312-20.4.115t Mechanism of crevice corrosion
Pourbaix 1974 Atlas of Electrochemical Equilibria in Aqueous Solutions
Srinivasan 2015 Correlation of Laboratory and Field Exposure of Localized Corrosion at Magnesium-Ceramic Interfaces, CORROSION 2015
J. Electrochem. Soc. Esmaily 162 C311 2015 10.1149/2.0341507jes Atmospheric corrosion of Mg alloy AZ91D fabricated by a semi-solid casting technique: the influence of microstructure
J. Electrochem. Soc. Shahabi-Navid 161 C277 2014 10.1149/2.088405jes NaCl-Induced atmospheric corrosion of the MgAl alloy AM50 ?the influence of CO2
Corros. Sci. Karlberg 11 499 1971 10.1016/S0010-938X(71)80017-3 On the mechanism of crevice corrosion of stainless Cr steels
Brit. Corros. J. Oldfield 13 13 1978 10.1179/000705978798358671 Crevice corrosion of stainless steels: I. A mathematical model
Szklarska-Smialowska 2005 Pitting and Crevice Corrosion
Brown 1971 DTIC Document ARPA coupling program on stress-corrosion cracking
Green 1976 Crevice Corrosion in Aluminum Alloys
Corros. Sci. Morcillo 77 6 2013 10.1016/j.corsci.2013.08.021 Atmospheric corrosion data of weathering steels. A review
ECS Trans. Chen 3 443 2007 10.1149/1.2789248 An analytical modeling method for calculating the current delivery capacity of a thin-film cathode and the stability of localized corrosion under atmospheric environments
J. Electrochem. Soc. Chen 155 C360 2008 10.1149/1.2926557 Calculations of the cathodic current delivery capacity and stability of crevice corrosion under atmospheric environments
Corrosion Foley 42 277 1986 10.5006/1.3584905 Localized corrosion of aluminum alloys-A review
Corros. Sci. Cheng 46 1649 2004 10.1016/j.corsci.2003.10.005 A study of the corrosion of aluminum alloy 2024-T3 under thin electrolyte layers
J. Solid State Chem. Zhang 177 849 2004 10.1016/j.jssc.2003.09.019 Hydrothermal synthesis and thermodynamic analysis of dawsonite-type compounds
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.