최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Infrared physics & technology, v.89, 2018년, pp.203 - 217
Gautam, Girish Dutt (Mechanical Engineering Department, Jaypee University of Engineering and Technology) , Pandey, Arun Kumar (Mechanical Engineering Department, Bundelkhand Institute of Engineering and Technology)
Abstract Kevlar is the most popular aramid fiber and most commonly used in different technologically advanced industries for various applications. But the precise cutting of Kevlar composite laminates is a difficult task. The conventional cutting methods face various defects such as delamination, b...
Composites Di Ilio 20 115 1989 10.1016/0010-4361(89)90638-1 Thermal damage in laser cutting of (0/90)2s aramid/epoxy laminates
Mater. Manuf. Processes Doyle 5 609 1990 10.1080/10426919008953280 The laser cutting of kevlar: a study of the chemical by-products
J. Mater. Eng. Perform. Yilbas 16 663 2007 10.1007/s11665-007-9107-2 Laser cutting of multilayered kevlar plates
Laser Eng. Yilbas 20 213 2010 Laser micro-cutting of Kevlar laminate: influence of cutting speed on cut geometry
Opt. Lasers Eng. Yilbas 50 204 2012 10.1016/j.optlaseng.2011.09.004 Laser cutting of Kevlar laminates and thermal stress formed at cutting sections
Int. J. Adv. Manuf. Technol. El-Taweel 40 907 2009 10.1007/s00170-008-1412-x Parametric studies on the CO2 laser cutting of Kevlar-49 composite
J. Mater. Process. Technol. Mathew 89-90 198 1999 10.1016/S0924-0136(99)00011-4 Parametric studies on pulsed Nd:YAG laser cutting of carbon fibre reinforced plastic composites
Int. J. Adv. Manuf. Technol. Negarestani 49 553 2010 10.1007/s00170-009-2431-y Nano-second pulsed DPSS Nd:YAG laser cutting of CFRP composites with mixed reactive and inert gases
CIRP Ann. - Manuf. Technol. Lau 39 179 1990 10.1016/S0007-8506(07)61030-0 Pulsed Nd:YAG laser cutting of carbon fibre composite materials
Opt. Commun. Rodden 210 319 2002 10.1016/S0030-4018(02)01807-2 A comprehensive study of the long pulse Nd:YAG laser drilling of multi-layer carbon fibre composites
Opt. Lasers Eng. Voisey 44 1185 2006 10.1016/j.optlaseng.2005.10.008 Fibre swelling during laser drilling of carbon fibre composites
J. Mater. Process. Technol. Dubey 204 412 2008 10.1016/j.jmatprotec.2007.11.048 Optimization of kerf quality during pulsed laser cutting of aluminium alloy sheet
Opt. Laser Technol. Tahir 92 142 2017 10.1016/j.optlastec.2017.01.005 An investigation of laser cutting quality of 22MnB5 ultra high strength steel using response surface methodology
Opt. Laser Technol. Yilbas 93 67 2017 10.1016/j.optlastec.2017.02.014 Laser cutting of various materials: Kerf width size analysis and life cycle assessment of cutting process
Opt. Lasers Eng. Tamrin 67 57 2015 10.1016/j.optlaseng.2014.11.001 Multiple-objective optimization in precision laser cutting of different thermoplastics
Opt. Laser Technol. Lutey 94 90 2017 10.1016/j.optlastec.2017.03.022 High speed pulsed laser cutting of LiCoO2 Li-ion battery electrodes
Opt. Lasers Eng. Centre 90 128 2017 10.1016/j.optlaseng.2016.10.007 CO2 laser cutting of ultra thin (75μm) glass based rigid optical solar reflector (OSR) for spacecraft application
Int. J. Adv. Manuf. Technol. Adalarasan 12 1 2016 Selection of optimal machining parameters in pulsed CO2 lasercutting of Al6061/Al2O3 composite using Taguchi-based respons surface methodology (T-RSM)
Opt. Laser Technol. Pandey 44 1858 2012 10.1016/j.optlastec.2012.01.019 Simultaneous optimization of multiple quality characteristics in laser cutting of titanium alloy sheet
Int. J. Adv. Manuf. Technol. Pandey 65 421 2013 10.1007/s00170-012-4181-5 Multiple quality optimization in laser cutting of difficult-to-laser-cut material using grey-fuzzy methodology
J. Mech. Sci. Technol. Pandey 27 2115 2013 10.1007/s12206-013-0527-7 Modeling and optimization of kerf taper and surface roughness in laser cutting of titanium alloy sheet
Mach. Sci. Technol. Pandey 17 545 2013 10.1080/10910344.2013.806182 Fuzzy expert system for prediction of kerf qualities in pulsed laser cutting of titanium alloy sheet
Comput. Aided Des. Rao 43 303 2011 10.1016/j.cad.2010.12.015 Teaching-learning-based optimization: A novel method for constrained mechanical design optimization problems
Eng. Optim. Rao 44 1447 2012 10.1080/0305215X.2011.652103 Teaching-learning-based optimization algorithm for unconstrained and constrained real-parameter optimization problems
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.