참고문헌 (20)

1. LI Shiwei, Wu Guorong, Tian Jiean, CFD Analysis on the Underhood Heat Management of a Bus, I.C.E. ＆. Powerplant, ( 2011), pp.25-27. 

2. Song sihong. The Numerical Simulation of the Ventilation and Heat Dispersion of the Cabin for Military Communication Generator Set, (Ph.D., Chongqing University, China 2003). 

3. Xu Jihua, Chen Rudong and Zang jianbin, Optimization of Diesel Generator set after air Water Cooler, Energy Conservation, (2006) No. 10, pp.14-16. 

4. Li Maoqing, Guo Qingbin and Li Peng. Simulation Research on low Noise Generator Ventilation System, Equipment Manufactring Technology, (2010) No. 4, pp.34-36. 

5. Li Anjing, Zhang Hong, Xu Limei, et al. Numerical Simulation on the Air Resistance of Exhaust Channel in 6kw Silent Canopy Diesel Generator Set. Mechanical Science and Technology for Aerospace Engineering, (2013) No. 32, pp.1006-1012. 

6. Wang Fujun: Computational Fluid Dynamics Analysis - the Principle and Application of CFD Software (Tsinghua University Press, china, 2004). 

7. LU Yi-ping, LI Wei-li and MA Xian-hao, Numerical Simulation of Temperature Field in Rotor of Large Turbo Generator with Air-coolant, Proceedings of the CSEE, (2007) Vol. 27 No. 12, pp.7-13. 

8. LI Jing, Song Jiahua and Wang Weisheng. Modeling and dynamic simulation of variable speed wind turbing with large capacity. Proceedings of the CSEE, (2004) No. 24, pp.100-105. 

9. Yang Shiming, Tao Wenquan: Teat transfer theory (Higher Education Press, china, 1998). 

10. S. Alahyari Beig, E. M, F. Kowsari, Investigation of Optimal Position of a Vortex Generator in a blocked Channel for Heat Transfer Enhancement of Electronic chips. International Journal of Heat and Mass Transfer, (2011) Vol. 54, pp.4317-4324. 10.1016/j.ijheatmasstransfer.2011.05.013 

    상세보기

11. Li Keming, Li Jianming and Wu Tao: Ventilation and Air Conditioning Design of Civil air Defence Works( Chinese Planning Press, china, 2006). 

12. Xia Qian, Yang Jianguo, 3-Dimension FEM Temperature Analysis and Experiment Research on Cylinder Liner of Diesel Engine. Diesel Engine, (2006) Vol. 28 No. 3, pp.24-27. 

13. Giovanni Cortella, M. M, Giannia Comini, CFD Simulation of Refrigerated Display Cabinets. International Journal of Refrigeration, (2001) Vol. 24, pp.250-250. 10.1016/s0140-7007(00)00015-3 

    상세보기

14. Jun Xin, S. S, Intergration of 3D Combustion Simulations and Conjugate Heat Transfer Analysis to Quantitatively Evaluate Component Temperatures. SAE Paper 2003-01-3128, (2003). 10.4271/2003-01-3128 

    

15. Han Zhanzhong, Calculation and analysis of fluent fluid engineering simulation. (Beijing Institute of Technology press, china, 2009). 

16. Bosbach J, P. J, Wagner C, et al, Experimental and numerical simulations of turbulent ventilation inaircraft cabins. Energy, (2006) Vol. 31, pp.694-705. 10.1016/j.energy.2005.04.015 

    상세보기

17. Kuhn M, B. J, Wager, Experimental Parametric Study of Forced and Mixed Convection in a Passenger Aircraft Cabin Mock-up. Building and Environment, (2009) Vol. 44, pp.961-970. 10.1016/j.buildenv.2008.06.020 

    상세보기

18. Suo Wenchao, Wang Xiancheng. Numerical Simulation of Airflow Field in Ship Cabin. Ship science and technology. Vol. 30 (2008) No. 1, pp.149-152. 

19. Pirooz Moradnia, M. G, Valery Chernoray, Hakan Nilsson, Flow of Cooling Air in an Electric Generator Model - An Experimental and Numerical Study, Applied Energy. Vol. 114 (2014) pp.644-653. 10.1016/j.apenergy.2013.10.033 

    상세보기

20. Pirooz Moradnia, V.C., Hakan Nilsson, Experimental Assessment of a Fully Predictive CFD Approach for Flow of Cooling Air in an Electric Generator. Applied Energy. Vol. 124(2014), pp.223-230. 10.1016/j.apenergy.2014.02.064 

    상세보기