참고문헌 (37)

1. J Eng Mech S Adhikari 130 12 1407 2004 10.1061/(ASCE)0733-9399(2004)130:12(1407) Adhikari S (2004) Reliability analysis using parabolic failure surface approximation. J Eng Mech 130(12):1407-1427 

   상세보기

2. 10.1016/B978-012064155-0/50004-5 Arora J (2004) Introduction to optimum design. Elsevier 

   

3. Atkinson KE (2008) An introduction to numerical analysis. John Wiley & Sons 

4. J Eng Mech K Breitung 110 3 357 1984 10.1061/(ASCE)0733-9399(1984)110:3(357) Breitung K (1984) Asymptotic approximations for multinormal integrals. J Eng Mech 110(3):357-366 

   상세보기

5. Struct Multidiscip Optim H Cho 50 5 717 2014 10.1007/s00158-014-1096-9 Cho H, Bae S, Choi KK, Lamb D, Yang RJ (2014) An efficient variable screening method for effective surrogate models for reliability-based design optimization. Struct Multidiscip Optim 50(5):717-738 

   상세보기

6. J Mech Des H Cho 138 1 011405 2016 10.1115/1.4031829 Cho H, Choi KK, Lee I, Lamb D (2016) Design sensitivity method for sampling-based RBDO with varying standard deviation. J Mech Des 138(1):011405 

   상세보기

7. Eur J Phys M Denny 22 4 403 2001 10.1088/0143-0807/22/4/315 Denny M (2001) Introduction to importance sampling in rare-event simulations. Eur J Phys 22(4):403 

   상세보기

8. Comput Struct X Guo 87 3-4 246 2009 10.1016/j.compstruc.2008.10.001 Guo X, Bai W, Zhang W (2009a) Confidence extremal structural response analysis of truss structures under static load uncertainty via SDP relaxation. Comput Struct 87(3-4):246-253 

   상세보기

9. Comput Methods Appl Mech Eng X Guo 198 41-44 3378 2009 10.1016/j.cma.2009.06.018 Guo X, Bai W, Zhang W, Gao X (2009b) Confidence structural robust design and optimization under stiffness and load uncertainties. Comput Methods Appl Mech Eng 198(41-44):3378-3399 

   상세보기

10. Int J Numer Methods Eng X Guo 86 8 953 2011 10.1002/nme.3083 Guo X, Du J, Gao X (2011) Confidence structural robust optimization by non-linear semidefinite programming-based single-level formulation. Int J Numer Methods Eng 86(8):953-974 

    상세보기

11. J Eng Mech Div AM Hasofer 100 1 111 1974 10.1061/JMCEA3.0001848 Hasofer AM, Lind NC (1974) Exact and invariant second-moment code format. J Eng Mech Div 100(1):111-121 

    상세보기

12. J Eng Mech M Hohenbichler 114 12 2195 1988 10.1061/(ASCE)0733-9399(1988)114:12(2195) Hohenbichler M, Rackwitz R (1988) Improvement of second-order reliability estimates by importance sampling. J Eng Mech 114(12):2195-2199 

    상세보기

13. Int J Numer Methods Eng SB Kang 111 3 203 2017 10.1002/nme.5458 Kang SB, Park JW, Lee I (2017) Accuracy improvement of the most probable point-based dimension reduction method using the hessian matrix. Int J Numer Methods Eng 111(3):203-217 

    상세보기

14. Comput Struct I Lee 86 13-14 1550 2008 10.1016/j.compstruc.2007.05.020 Lee I, Choi KK, Du L, Gorsich D (2008a) Dimension reduction method for reliability-based robust design optimization. Comput Struct 86(13-14):1550-1562 

    상세보기

15. Comput Methods Appl Mech Eng I Lee 198 1 14 2008 10.1016/j.cma.2008.03.004 Lee I, Choi KK, Du L, Gorsich D (2008b) Inverse analysis method using MPP-based dimension reduction for reliability-based design optimization of nonlinear and multi-dimensional systems. Comput Methods Appl Mech Eng 198(1):14-27 

    상세보기

16. Struct Multidiscip Optim I Lee 44 3 299 2011 10.1007/s00158-011-0659-2 Lee I, Choi KK, Zhao L (2011) Sampling-based RBDO using the stochastic sensitivity analysis and dynamic kriging method. Struct Multidiscip Optim 44(3):299-317 

    상세보기

17. J Mech Des I Lee 134 10 100912 2012 10.1115/1.4007391 Lee I, Noh Y, Yoo D (2012) A novel second-order reliability method (SORM) using noncentral or generalized chi-squared distributions. J Mech Des 134(10):100912 

    상세보기

18. Int J Numer Methods Eng J Lim 100 10 773 2014 10.1002/nme.4775 Lim J, Lee B, Lee I (2014) Second-order reliability method-based inverse reliability analysis using hessian update for accurate and efficient reliability-based design optimization. Int J Numer Methods Eng 100(10):773-792 

    상세보기

19. Int J Numer Methods Eng J Lim 107 2 93 2016 10.1002/nme.5150 Lim J, Lee B, Lee I (2016) Post optimization for accurate and efficient reliability-based design optimization using second-order reliability method based on importance sampling and its stochastic sensitivity analysis. Int J Numer Methods Eng 107(2):93-108 

    상세보기

20. Madsen HO, Krenk S, Lind NC (2006) Methods of structural safety. Courier Corporation 

21. Struct Saf RE Melchers 6 1 3 1989 10.1016/0167-4730(89)90003-9 Melchers RE (1989) Importance sampling in structural systems. Struct Saf 6(1):3-10 

    상세보기

22. J Mech Des JW Park 140 2 024501 2018 10.1115/1.4038563 Park JW, Lee I (2018) A study on computational efficiency improvement of novel SORM using the convolution integration. J Mech Des 140(2):024501 

    상세보기

23. Int J Solids Struct S Rahman 43 9 2820 2006 10.1016/j.ijsolstr.2005.05.053 Rahman S, Wei D (2006) A univariate approximation at most probable point for higher-order reliability analysis. Int J Solids Struct 43(9):2820-2839 

    상세보기

24. Probab Eng Mech S Rahman 19 4 393 2004 10.1016/j.probengmech.2004.04.003 Rahman S, Xu H (2004) A univariate dimension-reduction method for multi-dimensional integration in stochastic mechanics. Probab Eng Mech 19(4):393-408 

    상세보기

25. 10.1002/9780470549124 Rao SS (2009) Engineering optimization: theory and practice. John Wiley & Sons 

    

26. Ann Math Stat M Rosenblatt 23 3 470 1952 10.1214/aoms/1177729394 Rosenblatt M (1952) Remarks on a multivariate transformation. Ann Math Stat 23(3):470-472 

    상세보기

27. 10.1002/9781118631980 Rubinstein RY, Kroese DP (2016) Simulation and the Monte Carlo method (Vol. 10). John Wiley & Sons 

    

28. Seber GA, Lee AJ (2012) Linear regression analysis (Vol. 329). John Wiley & Sons 

29. J Mech Des J Tu 121 4 557 1999 10.1115/1.2829499 Tu J, Choi KK, Park YH (1999) A new study on reliability-based design optimization. J Mech Des 121(4):557-564 

    상세보기

30. AIAA J J Tu 39 4 667 2001 10.2514/2.1360 Tu J, Choi KK, Park YH (2001) Design potential method for robust system parameter design. AIAA J 39(4):667-677 

    상세보기

31. Probab Eng Mech D Wei 22 1 27 2007 10.1016/j.probengmech.2006.05.004 Wei D, Rahman S (2007) Structural reliability analysis by univariate decomposition and numerical integration. Probab Eng Mech 22(1):27-38 

    상세보기

32. Int J Numer Methods Eng H Xu 61 12 1992 2004 10.1002/nme.1135 Xu H, Rahman S (2004) A generalized dimension-reduction method for multidimensional integration in stochastic mechanics. Int J Numer Methods Eng 61(12):1992-2019 

    상세보기

33. Struct Multidiscip Optim D Yoo 50 5 787 2014 10.1007/s00158-014-1081-3 Yoo D, Lee I, Cho H (2014) Probabilistic sensitivity analysis for novel second-order reliability method (SORM) using generalized chi-squared distribution. Struct Multidiscip Optim 50(5):787-797 

    상세보기

34. J Mech Des BD Youn 125 2 221 2003 10.1115/1.1561042 Youn BD, Choi KK, Park YH (2003) Hybrid analysis method for reliability-based design optimization. J Mech Des 125(2):221-232 

    상세보기

35. Struct Multidiscip Optim BD Youn 26 3-4 272 2004 10.1007/s00158-003-0345-0 Youn BD, Choi KK, Yang RJ, Gu L (2004) Reliability-based design optimization for crashworthiness of vehicle side impact. Struct Multidiscip Optim 26(3-4):272-283 

    상세보기

36. AIAA J BD Youn 43 4 874 2005 10.2514/1.6648 Youn BD, Choi KK, Du L (2005) Enriched performance measure approach for reliability-based design optimization. AIAA J 43(4):874-884 

    상세보기

37. J Mech Des L Zhao 135 9 091003 2013 10.1115/1.4024731 Zhao L, Choi KK, Lee I, Gorsich D (2013) Conservative surrogate model using weighted kriging variance for sampling-based RBDO. J Mech Des 135(9):091003 

    상세보기