최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Energies, v.12 no.13, 2019년, pp.2462 -
Zhang, Jun-hui (State Key Laboratory of Fluid Power and Mechatronic Systems, Zhejiang University, Hangzhou 310027, China) , Liu, Gan (State Key Laboratory of Fluid Power and Mechatronic Systems, Zhejiang University, Hangzhou 310027, China) , Ding, Ruqi (Key Laboratory of Conveyance and Equipment, Ministry of Education, East China Jiaotong University, Nanchang 330013, China) , Zhang, Kun (State Key Laboratory of Fluid Power and Mechatronic Systems, Zhejiang University, Hangzhou 310027, China) , Pan, Min (Department of Mechanical Engineering, University of Bath, Bath BA2 7AY, UK) , Liu, Shihao (State Key Laboratory of Fluid Power and Mechatronic Systems, Zhejiang University, Hangzhou 310027, China)
With the compact circuit layout and small size, hydraulic manifolds sometimes cause high pressure loss. The purpose of this paper is to investigate the pressure loss under different circumstances with various geometry features and present solutions to reduce pressure loss. The pressure loss performa...
Huber The selection of mechanical actuators based on performance indices Proc. R. Soc. Lond. Series A Math. Phys. Eng. Sci. 1997 10.1098/rspa.1997.0117 453 2185
Raibert BigDog, the rough-terrain quadruped robot IFAC Proc. 2008 41 10822
Semini Design of HyQ-A hydraulically and electrically actuated quadruped robot Proc. Inst. Mech. Eng. Part. I J. Syst. Control Eng. 2011 225 831
Quan Review of energy efficient direct pump controlled cylinder electro-hydraulic technology Renew. Sustain. Energy Rev. 2014 10.1016/j.rser.2014.04.036 35 336
Du RETRACTED: Performance analysis of an energy-efficient variable supply pressure electro-hydraulic motion control system Control Eng. Pract. 2016 10.1016/j.conengprac.2015.12.013 48 10
Yuan Characteristics of energy efficient switched hydraulic systems JFPS Int. J. Fluid Power Syst. 2014 10.5739/jfpsij.8.90 8 90
Murrenhoff, H., Sgro, S., and Vukovic, M. (2014, January 26). An overview of energy saving architectures for mobile applications. Proceedings of the 9th International Fluid Power Conference, Aachen, Germany.
Zhang Electro-hydraulic damper for energy harvesting suspension: Modeling, prototyping and experimental validation Appl. Energy 2017 10.1016/j.apenergy.2017.04.085 199 1
Gong Power control strategy and performance evaluation of a novel electro-hydraulic energy-saving system Appl. Energy 2019 10.1016/j.apenergy.2018.10.066 233 724
10.3390/en10030310 Zardin, B., Cillo, G., Rinaldini, C., Mattarelli, E., and Borghi, M. (2017). Pressure losses in hydraulic manifolds. Energies, 10.
Idelchik, I.E. (1960). Handbook of Hydraulic Resistance, Hemisphere Publishing Corp.. [1st ed.].
Oberlack Similarity in non-rotating and rotating turbulent pipe flows J. Fluid Mech. 1999 10.1017/S0022112098001542 379 1
Wang Direct numerical simulation of a turbulent 90° bend pipe flow Int. J. Heat Fluid Flow 2018 10.1016/j.ijheatfluidflow.2018.08.003 73 199
Zhang CFD-based optimal design of duct nets in hydraulic manifold block J. Wuhan Univ. Technol. 2006 28 621
Song, Z.A., and Yong’An, W. (2009, January 21-22). Research and analysis of the resistance characteristic of combined flow channel. Proceedings of the 2009 International Workshop on Information Security and Application (IWISA 2009), Qingdao, China.
Abe, O., Tsukiji, T., Hara, T., and Yasunaga, K. (2011). Pressure Drop of Pipe Flow in Manifold Block. 8th JFPS International Symposium on Fluid Power, Okinawa, Japan, 25-28 October, 2011, The Japan Fluid Power System Society.
10.3390/en10060788 Zardin, B., Cillo, G., Borghi, M., D’Adamo, A., and Fontanesi, S. (2017). Pressure losses in multiple-elbow paths and in v-bends of hydraulic manifolds. Energies, 10.
Kruth Progress in additive manufacturing and rapid prototyping CIRP Ann. Manuf. Technol. 1998 10.1016/S0007-8506(07)63240-5 47 525
Frazier Metal additive manufacturing: A review J. Mater. Eng. Perform. 2014 10.1007/s11665-014-0958-z 23 1917
Tofail Additive manufacturing: Scientific and technological challenges, market uptake and opportunities Mater. Today 2018 10.1016/j.mattod.2017.07.001 21 22
Chhabra Rapid casting solutions: A review Rapid Prototyp. J. 2011 10.1108/13552541111156469 17 328
Sachs Three-dimensional printing: Rapid tooling and prototypes directly from a CAD model CIRP Ann. Manuf. Technol. 1990 10.1016/S0007-8506(07)61035-X 39 201
Saunders, M. (2019, March 27). How AM Could Disrupt Your Market. Available online: https://www.renishaw.com/en/additive-impact-part-2-how-am-could-disrupt-your-market--37551.
Cooper Additive manufacturing for product improvement at Red Bull technology Mater. Des. 2012 10.1016/j.matdes.2012.05.017 41 226
10.1115/1.4031156 Schmelzle, J., Kline, E.V., Dickman, C.J., Reutzel, E.W., Jones, G., and Simpson, T.W. (2015). (Re)designing for part consolidation: Understanding the challenges of metal additive manufacturing. J. Mech. Des., 137.
Qian A numerical investigation of the flow of nanofluids through a micro Tesla valve J. Zhejiang Univ. Sci. A 2019 10.1631/jzus.A1800431 20 50
Rohsenow, W.M., Hartnett, J.P., and Cho, Y.I. (1998). Handbook of Heat Transfer, McGraw-Hill.
Gandhi CFD simulation for steam distribution in header and tube assemblies Chem. Eng. Res. Des. 2012 10.1016/j.cherd.2011.08.019 90 487
Agrawal Laser anemometer study of flow development in curved circular pipes J. Fluid Mech. 1978 10.1017/S0022112078000762 85 497
Sudo Experimental investigation on turbulent flow in a circular-sectioned 90-degree bend Exp. Fluids 1998 10.1007/s003480050206 25 42
Kalpakli Vortical patterns in turbulent flow downstream a 90° curved pipe at high Womersley numbers Int. J. Heat Fluid Flow 2013 10.1016/j.ijheatfluidflow.2013.09.008 44 692
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.