$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

Synthesis of Metal-Organic Framework material Cu-BTC and its application for $CO_2$ adsorption
유기 금속 Framework Cu-BTC의 합성 및 이산화탄소 분리 응용 원문보기

한국산학기술학회 2011년도 춘계학술논문집 1부, 2011 May 27, 2011년, pp.147 - 150  

Peng, Mei-Mei (Chemical Engineering Department, HanseoUniversity) ,  Hemalatha, Pushparaj (Chemical Engineering Department, HanseoUniversity) ,  Ganesh, Mani (Chemical Engineering Department, HanseoUniversity) ,  Venkatachalam, Kandan (Chemical Engineering Department, HanseoUniversity) ,  Oh, Han-Seok (Chemical Engineering Department, HanseoUniversity) ,  Jang, Hyun-Tae (Chemical Engineering Department, HanseoUniversity)

Abstract AI-Helper 아이콘AI-Helper

A copper-based metal organic framework (MOF) named Cu-BTC, also known as HKUST-1, was successfully synthesized by using a solvothermal method. The properties of the Cu-BTC sample were characterized with Powder X-ray diffraction (XRD) for phase structure, Thermogravimetric analysis (TGA) for thermal ...

AI 본문요약
AI-Helper 아이콘 AI-Helper

* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.

제안 방법

  • [16], and has been widely studied for gas adsorption and diffusion [17-19], especially for hydrogen storage. In this work, we synthesized Cu-BTC by using a traditional solvothermal method at 393 K, and studied its CO2 adsorption characteristics.

이론/모형

  • The Cu-BTC material studied in this work was harvested from the reaction of cupric nitrate hydrate [Cu(NO3)2·3H2O] and trimesic acid (BTC;1,3,5-benzenetricarboxylate) by using a solvothermal method [20].
  • Prior to each adsorption measurement the samples were evacuated at 200 °C under vacuum (p<10-5mbar) for 6 hours in the degas port. The specific surface area, SBET was determined from the linear part of the BETequation, and the pore volume was calculated using a BET plot based on the amount of nitrogen gas adsorbed at the last adsorption point (P/P0=0.98) and the pore size distribution using the Barrett-Joyner-Halenda (BJH) method. SEM images were captured on JEOL JSM 5600 scanning electron microscope.
본문요약 정보가 도움이 되었나요?
LOADING...
섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로