보고서 정보
주관연구기관 |
서울대학교 Seoul National University |
연구책임자 |
류관희
|
참여연구자 |
김경욱
|
보고서유형 | 최종보고서 |
발행국가 | 대한민국 |
언어 |
한국어
|
발행년월 | 1984-08 |
주관부처 |
과학기술부 |
사업 관리 기관 |
서울대학교 Seoul National University |
등록번호 |
TRKO200200010402 |
DB 구축일자 |
2013-04-18
|
초록
▼
본 연구의 목적은 농가의 경지 규모와 작부 체계별로 적정한 크기의 동력경운기를 선정하기 위하여 이에 필요한 자료를 기초 실험과 자료 수집을 통하여 분석하고 이를 토대로 적정한 크기의 동력경운기를 선정할 수 있는 컴퓨터 프로그램을 개발하는 데 있었으며, 그 연구 결과는 다음과 같이 요악될 수 있다. 1. 동력경운기 탑재용 6, 8, 10 ps의 디이젤 엔진에 대한 전부하 및 부분부하 시험을 실시하였으며, 이를 토대로 전부하 및 부분부하시에 소요마력별로 연료소비율을 추정할 수 있는 수학적 모형을 만들었다. 2. 여러가지 토양 조건에서
본 연구의 목적은 농가의 경지 규모와 작부 체계별로 적정한 크기의 동력경운기를 선정하기 위하여 이에 필요한 자료를 기초 실험과 자료 수집을 통하여 분석하고 이를 토대로 적정한 크기의 동력경운기를 선정할 수 있는 컴퓨터 프로그램을 개발하는 데 있었으며, 그 연구 결과는 다음과 같이 요악될 수 있다. 1. 동력경운기 탑재용 6, 8, 10 ps의 디이젤 엔진에 대한 전부하 및 부분부하 시험을 실시하였으며, 이를 토대로 전부하 및 부분부하시에 소요마력별로 연료소비율을 추정할 수 있는 수학적 모형을 만들었다. 2. 여러가지 토양 조건에서 쟁기 경운 시험을 실시하여 토양응집력, 경심, 경운 속도에 관한 함수로 견인력 및 견인동력을 추정할 수 있는 수학적 모형을 만들었다. 3. 여러가지 토양 조건에서 로우터리 경운 시험을 실시하여 토양 전단응력, 경심, 경운피치에 관한 함수로 PTO토오크 및 PTO동력을 추정할 수 있는 수학적 모형을 만들었다. 4. 자동탈곡기에 의한 보리탈곡 시험과 기존의 벼탈곡 시험 연구자료로부터 벼와 보리탈곡시의 소요동력을 각각 추정할 수 있는 수학적 모형을 만들었다. 5. 기존 연구자료를 수집.분석하여 드릴파종기에 의한 파종 작업, 동력분무기에 의한 방제작업 및 트레일러 운반작업시의 소요동력을 추정할 수 있는 수학적 동력을 만들었다. 6. 현지조사와 문헌 조사를 토대로 영농 지대를 답리작 가능 여부에 따라 중북부와 남부로 구분하고 각 지대별로 벼, 보리, 대두 재배를 위한 동력경운기 중심의 기계화 작업 체계를 설정하였다. 7. 상기 연구 결과를 토대로 주어진 경지 규모와 작부 체계(전답 비율, 답리작 비율)에 적정한 크기의 동력경운기를 선정할 수 있는 컴퓨터 프로그램을 개발하였으며, 경지 면적 1-3ha, 답면적 비율 60-80%, 답리작 비율(남부 지방에만 해당) 70%에 대하여 분석한 결과는 다음과 같다. (가) 답리작을 하지 않는 중북부 지방에서는 경지 규모가 3ha까지는 답면적 비율 60-80%의 범위에서도 5, 6 ps의 소형 동력경운기가 경제적으로 유리한 것으로 나타났다. 연료소지량에 있어서는 6ps동력경운기가 가장 연료의 절약 효과가 큰 것으로 나타났다. (나)답리작을 실시하는 남부 지방에서는 경지 규모 1.5ha까지는 답면적 비율 60-80%, 답리작 비율 30%에서도 5, 6 ps의 소형 동력경운기가 순수익이나 연료소비량에 있어서 유리하게 나타났으나 경지 면적이 증대하고 전작 및 답리작 면적이 증대할수록 5, 6 ps의 소형 동력경운기는 적기 작업의 일실로 인한 수량 감소가 두드러지게 나타나므로 8, 10 ps의 대형 동력경운기가 순수익이 증가하는 것으로 나타났다. (다) 이상의 분석 결과로 미루어 볼 때 중북부 지방은 3ha까지, 남부 지방은 1.5ha까지 5, 6 ps의 소형 동력경운기가 순수익이나 연료 절약면에서 8, 10 ps의 대형 동력경운기보다 유리한 것으로 판단한다.
Abstract
▼
The objective of this study was to develop a computer model to determine the optimum size of power tiller. In order to obtain the relationships, data and information necessary to describe the model several experiments were implemented and the results of previous studies were analzed. The results of
The objective of this study was to develop a computer model to determine the optimum size of power tiller. In order to obtain the relationships, data and information necessary to describe the model several experiments were implemented and the results of previous studies were analzed. The results of the study are summarized as follows. 1. Full-load and part-load tests were done on 6, 8, 10 ps diesel engines for power tiller. Based on the test results, mathematical models to estimate brake specific fuel consumption for given power requirement were developed. 2. Experiment on plowing operation with a 8 ps power tiller was carried out, and a mathematical model to estimate drawbar pull and drawbar power in terms of soil cohesion, plowing depth and plowing speed was developed. 3. Experiment on rotary tilling with a 8 ps power tiller was carried out, and a mathematical model to estimate PTO torque and PTO power in terms of soil shear stress, tilling depth and tilling pitch was developed. 4. Experiment on barley threshing with an automatic thresher was carried out, and the previous expermental data on paddy threshing were investigated. Mathematical models to esti- mate power requirement in terms of feed rate were developed for both paddy and barley. 5. Mathematical models to estimate power requirement for grain drill, power sprayer and trailer were developed. 6. Based on on-site survey and research literatures, the two agricultural zones, mid-and-northern region and southern region, were established according to the possibility of double cropping in the paddy field. For each agricultural zones typical mechanized farming systems with a power tiller for cultivating rice, barley and soybean were established. 7. Based on the results obtained above, a computer program, which determines the optimum size of power tiller for the given farm size, the ratio of paddy area to total area and the ratio of double cropping area to the paddy area, was developed. The computer program was excecuted for the farm size, 1 to 3 ha, and the ratio of paddy area to the total area, 60 - 80%, and the ratio of double cropping area to the total area, 70%. (a) In the mid and northern region, a smaller power tiller (5 or 6 ps) appeared to be more economical for the farm size up to 3 ha. With respect to fuel consumption a 6 ps power tiller appeared to be more favorable. (b) In the southern region, a smaller tiller (5 or 6 ps) appeared to be more economical for the farm size up to 1.5 ha. But, a larger power tiller (8 or 10 ps) appeared to become more economical as the farm size and the barley planted area increased.
목차 Contents
- 표지...1
- 1. 기초실험...16
- 2. 자료분석...90
- 3. 수학적 모형화 및 컴퓨터 프로그래밍...133
- 4. 결과 및 고찰...171
- 인용문헌...189
- 논문 발표 계획...192
※ AI-Helper는 부적절한 답변을 할 수 있습니다.