보고서 정보
주관연구기관 |
연세대학교 Yonsei University |
연구책임자 |
이영훈
|
발행국가 | 대한민국 |
언어 |
한국어
|
발행년월 | 1998-04 |
주관부처 |
과학기술부 |
사업 관리 기관 |
연세대학교 Yonsei University |
등록번호 |
TRKO200200017773 |
DB 구축일자 |
2013-04-18
|
키워드 |
선구조.불연속면.원격탐사.불연속체 모형.지하수 유동.ababdoned mine.toxic metal.environmental preservation.fracture system.synsurface hydrogeology.transport of pollutant.
|
초록
▼
지하수 유동특성규명을 위한 조사는 원격 탐측 자료를 이용한 광역적인 분석과 야외조사를 통한 불연속면 망 특성분석으로 대분된다. 선구조 및 불연속면을 이용한 특성분석을 위하여 연구 지역내 기초자료의 조사 및 수집, 원격탐사자료의 선구조분석, 조사된 불연속면의 자료의 정량화 광역특성분석, 불연속면을 이용한 지역특성분석오염물질거동 모델링 과정으로 수행하였다.1차년도 연구지역은 충청북도 옥천군 안남면에 위치한 금적산 금, 은, 동 폐광산 인근12km×12km를 대상지역으로 선정하였다. 본 역내의 선구조는 SPOT 인공위성에서
지하수 유동특성규명을 위한 조사는 원격 탐측 자료를 이용한 광역적인 분석과 야외조사를 통한 불연속면 망 특성분석으로 대분된다. 선구조 및 불연속면을 이용한 특성분석을 위하여 연구 지역내 기초자료의 조사 및 수집, 원격탐사자료의 선구조분석, 조사된 불연속면의 자료의 정량화 광역특성분석, 불연속면을 이용한 지역특성분석오염물질거동 모델링 과정으로 수행하였다.1차년도 연구지역은 충청북도 옥천군 안남면에 위치한 금적산 금, 은, 동 폐광산 인근12km×12km를 대상지역으로 선정하였다. 본 역내의 선구조는 SPOT 인공위성에서 단일밴드로 원격 탐측된 자료를 이용하여 색대역 조정 및 여과기법의 영상개선에 의해 선구조추출을 실시하였고 불연속면 조사는 금적산 광산인근 4km×3.5km영역에 대하여 노두규모에 따라 대표절리조사와 선형조사를 병행하여 실시하였다. 본 역내의 선구조는 6개의 주방향이 나타났으며 이중 32。와 121。의 옥천 구조대 방향의 선구조가 저지대에서 높은 밀도를 지니는 것으로 나타났다. 불연속면은 3개의 주방향으로 분석되며 경사벡터의 방향성은 236。/45。, 318。/81。, 78。/50。이고 각각 30.21, 61.47, 12.39의 분산치로 피셔분포를보이며 크기는 1.11±0.283m, 0.937±0.316m, 0.852±0.427m의 대수정규분포하고 있다.2차년도 연구지역은 충청북도 보은군 회남면에 위치한 한도탄광 인근 6.5km×6.5km를대상지역으로 선정하였다. 본 역내의 절리둥의 불연속면을 고려한 구조구는 5개지역으로구분되었고 선구조는 43。, 80。와 105。 방향의 선구조가 우세하며 이들 방향을 조합한 7개의 선구조 Domain으로 구분 하였다. 불연속체 모형 모사를 위한 방향성 및 크기자료의분석을 실시하고 지역별 기초자료를 특성화하여 불연속면의 방향에 따라 2개의 구조구로 구분하였다. 구조구 1에서의 주방향의 경사벡터와 분산은 38.7。/10.2。, 134.8。/36。, 4.09,9.01이고 구조구 2에서는 353.2。/29.9。, 162.2。/40.7。과 268.8。/2.0。이고 각각 7.31,10.28, 7.61의 분산치로 피셔분포를 보인다. 선구조 밀도는 저지대에서 높은 밀도를 나타내며 선구조 밀도값을 이용한 지하수모사결과 수리전도도(k, unit : 10-6cm/sec) = 0.45*선구조밀도값(LD.) + 0.28의 상관관계를 보인다. 오염물질의 이동은 1년, 10년, 20년 및 100년경과를 모사하였으며 20년후기 초기 농도치의 10%의 오염물질은 지하수 하류방향으로 약500m 상류방향으로 150m의 범위로 분포한다.
Abstract
▼
The works for the identification of the characteristics ofgroundwater flow consist of regional analysis using remotely sensed data and analysisof the characteristics of discontinuity network through field survey. To analysislineament and discontinuities, collection of basic data i
The works for the identification of the characteristics ofgroundwater flow consist of regional analysis using remotely sensed data and analysisof the characteristics of discontinuity network through field survey. To analysislineament and discontinuities, collection of basic data in studying area, lineamentanalysis of remotely sensed data, quantitative analysis of surveyed discontinuity data,regional characteristics analysis, local characteristics analysis using discontinuity dataand modeling movement of contaminants were performed.In the first year of this study, 12km×12km area in the vicinity of gold, silver, andbronze mines at Geumjuk Mt. located in Choongchungbukdo Okchungun was selected asa studying area. Lineaments in this area were extracted through digital processingsuch as filtering remotely sensed data with one band from SPOT or modifying colorregion of the data. The survey of discontinuities were performed using scanlinemethod and selection method side by side according to the sizes of the out crops in4km×3.5km area near the Keumjuk Mt. mine. The lineaments of this area show 6major orientations, and among these lineaments oriented to 32。 and 121。 which is theorientation of Okchun belt have higher density in lower region. As a result ofapplying the analysed data to 8000m3 bulk including Kenmjuk Mt. mines. Baechermodel was suitable for location model in this study. Discontinuities analysed to have 3major orientations. Their dip vector orientations are 236。/45。, 318。/81。, 78。/50。,their fissure distribution shows dispersion of 30.21, 61.47, 12.39 each, and the tracelength of them are 1.11±0.283m. 0.937±0.316m, 0.852±0.427m and they show logarithmicnormal distribution.In the second year of this study, 6.2km×6.5km area in the vicinity of Hando coalmines located in Choongchungbukdo Boeungun Hoinammyun was selected as a studyingarea. Structural domains which considered discontinuities such as joints in this areawere classified into 5 regions. Lineaments are dominant in 40。, 80。, 105。 direction,and structural domains which considered the lineaments were classified into 7 domains.To model discontinuity-model, 2 structural domains were created by performingorientation and traverse length data analysis and specification of regional basic data.In domain 1, the dip vectors of major orientations are 38.7。/10.2。 and 134.8。/36。,and the dispersion of fissure distribution are 4.09 and 9.01 each. In domain 2, the dipvectors of major orientations are 353.2。/29.2。, 162.2。/40.7。 and 268.8。/2.0。, anddispersion of fissure distribution are 7.31, 10.28, 7.61 each. The density of lineamentsshows higher value in lower regions. As a result of groundwater modeling withlineament density, the relationship between lineament density and hydraulic conductivitywere determined as follows : k(unit:10-6cm/sec)=0.45×LD.(lineament density) + 0.28.The movement of contaminant was modeled in 1, 10, 20, and 100 years of periods.After 20 years, 10% of initial concentration of contaminant was ranged in from 150m inupper stream direction to 50m in lower stream direction.
목차 Contents
- 1. 서론...7
- 1.1 연구배경...7
- 1.2 연구목적...7
- 1.3 연구범위...7
- 2. 연구방법 및 이론...8
- 2.1 선구조 자료 분석...8
- 2.2 불연속면 자료 분석...9
- 2.3 3차원 모델링...9
- 3. 사례연구...10
- 4. 불연속면 자료 구축 및 분석...16
- 4.1 불연속면 자료의 조사...16
- 4.2 불연속면의 구조구 분석...16
- 4.3 선구조와 불연속면과의 비교...19
- 4.4 SCANE LINE에 의한 불연속면의 특성조사...19
- 4.5 지하수와 오염물질거동모사...27
- 5. 결론 및 토의...35
- 6. 참고문헌...36
※ AI-Helper는 부적절한 답변을 할 수 있습니다.