생물학적 질소·인 제거는 질산화와 탈질, 인의 용출과 과잉 섭취 등 미생물의 생물학적인 활동에 의해 이루어진다. 이러한 미생물의 생물학적인 활동은 혐기, 무산소 그리고 호기성의 조건을 반복적으로 주어짐으로써 일어나게 된다.
본 연구에서는 간헐포기공정에서 포기시간과 비포기시간을 조절하기 위한 제어변수로서 ORP와 pH의 적용 가능성을 평가하기 위하여 200L의 실험실 규모의 혐기-간헐포기 공정을 제작하여 90일간 운영하였다. 유입수는 COD_(cr) : 400mg/L, 총질소 : 40mg/L 그리고 총인 : 7mg/L의 합성폐수를 주입하였고, 간헐포기조의 DRP와 pH를 연속적으로 측정하여 질소 및 인의 농도 변화와 비교하였다.
On-line monitoring에 의해 기록된 ORP와 pH곡선과 간헐포기조내 질소 및 인의 농도변화를 관찰한 결과, ORP 곡선에서는 질산화와 탈질이 완료되는 점에서 각각 bending point가 나타나 질산화와 탈질반응의 경과를 예측할 수 있었고, pH곡선에서는 질산화, 탈질은 물론 인 섭취와 용출에 따라서도 곡선의 형태가 변하여, 질산화, 탈질 그리고 인 섭취가 완결되는 시간에 peak point가 나타났다. 그러나 pH 곡선은 노이즈가 많아 ...
생물학적 질소·인 제거는 질산화와 탈질, 인의 용출과 과잉 섭취 등 미생물의 생물학적인 활동에 의해 이루어진다. 이러한 미생물의 생물학적인 활동은 혐기, 무산소 그리고 호기성의 조건을 반복적으로 주어짐으로써 일어나게 된다.
본 연구에서는 간헐포기공정에서 포기시간과 비포기시간을 조절하기 위한 제어변수로서 ORP와 pH의 적용 가능성을 평가하기 위하여 200L의 실험실 규모의 혐기-간헐포기 공정을 제작하여 90일간 운영하였다. 유입수는 COD_(cr) : 400mg/L, 총질소 : 40mg/L 그리고 총인 : 7mg/L의 합성폐수를 주입하였고, 간헐포기조의 DRP와 pH를 연속적으로 측정하여 질소 및 인의 농도 변화와 비교하였다.
On-line monitoring에 의해 기록된 ORP와 pH곡선과 간헐포기조내 질소 및 인의 농도변화를 관찰한 결과, ORP 곡선에서는 질산화와 탈질이 완료되는 점에서 각각 bending point가 나타나 질산화와 탈질반응의 경과를 예측할 수 있었고, pH곡선에서는 질산화, 탈질은 물론 인 섭취와 용출에 따라서도 곡선의 형태가 변하여, 질산화, 탈질 그리고 인 섭취가 완결되는 시간에 peak point가 나타났다. 그러나 pH 곡선은 노이즈가 많아 필터링이 필요하였다.
ORP와 pH곡선은 포기정도나 오염물질 부하 등 공정의 상태에 따라 곡선의 형태가 변화하였는데 이를 통해 공정의 상태를 평가할 수 있었고, ORP와 pH 곡선의 bending-point와 peak point가 명확히 나타나도록 적절히 관리하면 ORP와 pH 곡선을 활용하여 간헐포기공정에서 질소와 인을 효율적이고 경제적으로 처리하도록 제어가 가능할 것으로 판단된다.
생물학적 질소·인 제거는 질산화와 탈질, 인의 용출과 과잉 섭취 등 미생물의 생물학적인 활동에 의해 이루어진다. 이러한 미생물의 생물학적인 활동은 혐기, 무산소 그리고 호기성의 조건을 반복적으로 주어짐으로써 일어나게 된다.
본 연구에서는 간헐포기공정에서 포기시간과 비포기시간을 조절하기 위한 제어변수로서 ORP와 pH의 적용 가능성을 평가하기 위하여 200L의 실험실 규모의 혐기-간헐포기 공정을 제작하여 90일간 운영하였다. 유입수는 COD_(cr) : 400mg/L, 총질소 : 40mg/L 그리고 총인 : 7mg/L의 합성폐수를 주입하였고, 간헐포기조의 DRP와 pH를 연속적으로 측정하여 질소 및 인의 농도 변화와 비교하였다.
On-line monitoring에 의해 기록된 ORP와 pH곡선과 간헐포기조내 질소 및 인의 농도변화를 관찰한 결과, ORP 곡선에서는 질산화와 탈질이 완료되는 점에서 각각 bending point가 나타나 질산화와 탈질반응의 경과를 예측할 수 있었고, pH곡선에서는 질산화, 탈질은 물론 인 섭취와 용출에 따라서도 곡선의 형태가 변하여, 질산화, 탈질 그리고 인 섭취가 완결되는 시간에 peak point가 나타났다. 그러나 pH 곡선은 노이즈가 많아 필터링이 필요하였다.
ORP와 pH곡선은 포기정도나 오염물질 부하 등 공정의 상태에 따라 곡선의 형태가 변화하였는데 이를 통해 공정의 상태를 평가할 수 있었고, ORP와 pH 곡선의 bending-point와 peak point가 명확히 나타나도록 적절히 관리하면 ORP와 pH 곡선을 활용하여 간헐포기공정에서 질소와 인을 효율적이고 경제적으로 처리하도록 제어가 가능할 것으로 판단된다.
Biological nutrient removal is accomplished by biological reactions such as nitrification, denitrification, P release and luxury uptake. These biological activities of microorganisms in activated sludge processes are conventionally obtained by a sequence of anaerobic, aerobic and anoxic processes.
I...
Biological nutrient removal is accomplished by biological reactions such as nitrification, denitrification, P release and luxury uptake. These biological activities of microorganisms in activated sludge processes are conventionally obtained by a sequence of anaerobic, aerobic and anoxic processes.
In this study, to evaluate applicability of ORP and pH as process control parameters for an intermittent aeration process, a 200L bench-scale plant was manufactured and operated for 90 days. It was fed with synthetic wastewater which contained COD_(cr) : 200mg/L, TN : 40mg/L and TP : 7mg/L. To confirm the results, ORP & pH were measured on-line and compared with the variation of nutrient concentration.
As the results, For nitrogen removal both ORP and pH were able to monitor successfully nitrification and denitrification. Bending-points on the ORP curve and peak points on the pH curve corresponded to the termination of nitrification and denitrification. For P uptake and release, pH showed the best performance. The aerobic pH apex was appeared when P uptake was finished and there was a relationship between P release and pH variation. But the pH curve needed filtering because there were many noises on it.
In this work, the shape of ORP & pH curve varied as the operating states like aeration status and organic loads were changed. It allowed the operating state of biological system to be identified. If the process manage properly to appear bending point and peak point clearly, on-line monitoring of ORP & pH will be a reliable and effective technique for process control of an intermittent aeration process.
Biological nutrient removal is accomplished by biological reactions such as nitrification, denitrification, P release and luxury uptake. These biological activities of microorganisms in activated sludge processes are conventionally obtained by a sequence of anaerobic, aerobic and anoxic processes.
In this study, to evaluate applicability of ORP and pH as process control parameters for an intermittent aeration process, a 200L bench-scale plant was manufactured and operated for 90 days. It was fed with synthetic wastewater which contained COD_(cr) : 200mg/L, TN : 40mg/L and TP : 7mg/L. To confirm the results, ORP & pH were measured on-line and compared with the variation of nutrient concentration.
As the results, For nitrogen removal both ORP and pH were able to monitor successfully nitrification and denitrification. Bending-points on the ORP curve and peak points on the pH curve corresponded to the termination of nitrification and denitrification. For P uptake and release, pH showed the best performance. The aerobic pH apex was appeared when P uptake was finished and there was a relationship between P release and pH variation. But the pH curve needed filtering because there were many noises on it.
In this work, the shape of ORP & pH curve varied as the operating states like aeration status and organic loads were changed. It allowed the operating state of biological system to be identified. If the process manage properly to appear bending point and peak point clearly, on-line monitoring of ORP & pH will be a reliable and effective technique for process control of an intermittent aeration process.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.