광대역 통합망의 급속한 발전으로 인하여 많은 네트워크 장비들은 L2 스위치를 통해서 연결되게 된다. 많은 가입자들은 L2 스위치를 통해서 장비를 연결해야하는데 layer2 네트워크는 layer3 네트워크와 동등한 수준의 QoS(Quality of Service)를 제공하지 못하므로 불공정한 대역을 할당받게 된다. layer2 스위치 망에서 QoS 를 보장하기 위한 많은 방법이 제안되어 왔지만 적절한 방식은 아직 나오고 있지 않다.$$a$$a본 논문은 layer2 네트워크에서 QoS, 즉 가입자 구별, 를 위한 새로운 방식을 제안한다. 프로바이더 ...
광대역 통합망의 급속한 발전으로 인하여 많은 네트워크 장비들은 L2 스위치를 통해서 연결되게 된다. 많은 가입자들은 L2 스위치를 통해서 장비를 연결해야하는데 layer2 네트워크는 layer3 네트워크와 동등한 수준의 QoS(Quality of Service)를 제공하지 못하므로 불공정한 대역을 할당받게 된다. layer2 스위치 망에서 QoS 를 보장하기 위한 많은 방법이 제안되어 왔지만 적절한 방식은 아직 나오고 있지 않다.$$a$$a본 논문은 layer2 네트워크에서 QoS, 즉 가입자 구별, 를 위한 새로운 방식을 제안한다. 프로바이더 브릿지를 위한 IEEE 802.1ad 표준에서 제공되고 있는 S-Tag를 위한 헤더의 16비트 공간을 통해서 가입자별로 ID를 생성하여 관리한다면 보다 복잡한 방법을 사용하지 않더라도 쉽게 가입자 구별할 수 있을 것으로 생각된다. 바로 이 점에 착안하여 기존의 패킷 포워딩 엔진에서 가입자 구별을 위해 약간의 하드웨어를 추가함으로써 가입자 구별을 위한 L2 패킷엔진을 설계할 수 있을 것이다. 설계 결과, 기존의 방식에 대비해서 4096 bytes 에 해당하는 메모리 용량과 약간의 복잡도의 증가로 가입자 구별을 위한 L2 패킷엔진을 설계가 가능하였다.$$a$$a
광대역 통합망의 급속한 발전으로 인하여 많은 네트워크 장비들은 L2 스위치를 통해서 연결되게 된다. 많은 가입자들은 L2 스위치를 통해서 장비를 연결해야하는데 layer2 네트워크는 layer3 네트워크와 동등한 수준의 QoS(Quality of Service)를 제공하지 못하므로 불공정한 대역을 할당받게 된다. layer2 스위치 망에서 QoS 를 보장하기 위한 많은 방법이 제안되어 왔지만 적절한 방식은 아직 나오고 있지 않다.$$a$$a본 논문은 layer2 네트워크에서 QoS, 즉 가입자 구별, 를 위한 새로운 방식을 제안한다. 프로바이더 브릿지를 위한 IEEE 802.1ad 표준에서 제공되고 있는 S-Tag를 위한 헤더의 16비트 공간을 통해서 가입자별로 ID를 생성하여 관리한다면 보다 복잡한 방법을 사용하지 않더라도 쉽게 가입자 구별할 수 있을 것으로 생각된다. 바로 이 점에 착안하여 기존의 패킷 포워딩 엔진에서 가입자 구별을 위해 약간의 하드웨어를 추가함으로써 가입자 구별을 위한 L2 패킷엔진을 설계할 수 있을 것이다. 설계 결과, 기존의 방식에 대비해서 4096 bytes 에 해당하는 메모리 용량과 약간의 복잡도의 증가로 가입자 구별을 위한 L2 패킷엔진을 설계가 가능하였다.$$a$$a
As Broadband convergence Network(BcN) is developed gradually, many network equipments will be connected via L2 switches. Many subscribers should be connected to their network equipments though the L2 switch. Because the layer 2 network provides users with the QoS (Quality of Service) less than layer...
As Broadband convergence Network(BcN) is developed gradually, many network equipments will be connected via L2 switches. Many subscribers should be connected to their network equipments though the L2 switch. Because the layer 2 network provides users with the QoS (Quality of Service) less than layer 3 network, lots of subscribers could be serviced unfairly in network bandwidth. Nevertheless researchers and cooperations suggested some methods to overcome weak points of layer 2 network in QoS, an absolute method did not appear.$$a$$aThis thesis suggests and designs new method for QoS in layer 2 network. The standard, IEEE 802.1ad, which is developed for the Provider Bridge will be best solution for the subscriber classification in layer 2 network. Of course, that is not for general ethernet network, the transformed layer 2 header of IEEE 802.1ad provides engineers with unused 16bit space. This 16bits space is the key of the subscriber classification. If switch equipments generate and write user ID in the space, 216 = 65,536 users can be classified.$$a$$aBy using the space of IEEE 802.1ad header, suggested L2 packet engine in this thesis classifies subscribers. Because the structure similar to L2 forwarding engine, the hardware implementation of new engine is less difficult. As the result, by adding only 4096 bytes compared with traditional L2 forwarding engine, L2 packet engine for subscriber classification can be designed successfully.$$a$$a
As Broadband convergence Network(BcN) is developed gradually, many network equipments will be connected via L2 switches. Many subscribers should be connected to their network equipments though the L2 switch. Because the layer 2 network provides users with the QoS (Quality of Service) less than layer 3 network, lots of subscribers could be serviced unfairly in network bandwidth. Nevertheless researchers and cooperations suggested some methods to overcome weak points of layer 2 network in QoS, an absolute method did not appear.$$a$$aThis thesis suggests and designs new method for QoS in layer 2 network. The standard, IEEE 802.1ad, which is developed for the Provider Bridge will be best solution for the subscriber classification in layer 2 network. Of course, that is not for general ethernet network, the transformed layer 2 header of IEEE 802.1ad provides engineers with unused 16bit space. This 16bits space is the key of the subscriber classification. If switch equipments generate and write user ID in the space, 216 = 65,536 users can be classified.$$a$$aBy using the space of IEEE 802.1ad header, suggested L2 packet engine in this thesis classifies subscribers. Because the structure similar to L2 forwarding engine, the hardware implementation of new engine is less difficult. As the result, by adding only 4096 bytes compared with traditional L2 forwarding engine, L2 packet engine for subscriber classification can be designed successfully.$$a$$a
※ AI-Helper는 부적절한 답변을 할 수 있습니다.