최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기전기학회논문지. The transactions of the Korean Institute of Electrical Engineers. B, 전기기기 및 에너지변환시스템부문, v.49 no.5, 2000년, pp.327 - 337
곽인구 (삼성전자 디지털 프린팅 사업부) , 변진규 (서울대 전기공학부) , 최경 (강원대) , 한송엽 (서울대 전기공학부)
In this paper, the design sensitivity formula for the control of the transient temperature distribution is developed using the direct differentiation method, and used for the optimal design of induction heating coil position. The temperature distribution is calculated using the heat source of the in...
E. J. Davies and P. G. Simpson, Induction Heating Handbook, London: McGraw-Hill, 1979
E. J. Davies, Conduction and Induction Heating, IEE Power Engineering Series 11, 1990
Y. M. Li, J. Fouladgar and G. Develey, 'Inverse Problem Methodology in an Induction-Heating System,' IEEE Trans. on Magn., vol.30, no.5, pp.3076-3079, 1994
N. Bianchi and F. Dughiero, 'Optimal-Design Techniques Applied to Transverse - Flux Induction-Heating Systems,' IEEE Trans. on Magn., vol.31, no.3, pp.1992-1995, 1995
O. Longeot, L. Nicolas and Ph. Wendling, '3D Design of an inductor for induction heating using 2DFEM and 3D BIEM modelling,' IEEE Trans, on Magn., vol.27, no.5, pp.4004-4007, 1991
H. Hedia, F. Henrotte, P. Dular, J.-F. Remacle and W. Legros, 'Optimization of the Width of a Thin Plate in a Transverse Flux Induction Furnace,' IEEE Trans. on Magn., vol.35, no.5, pp.3118-321, 1998
C. Chaboudez, S. Clain, R. Glardon, D. Mari, J. Rappaz and M. Swierkosz, 'Numerical Modeling in Induction-Heating for Axisymmetrical Geometries,' IEEE Trans. on Magn., vol.33, no.1, pp.739-745, 1997
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.