$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

수종의 엔진구동형 니켈-타이타늄 파일에 의한 급한 만곡의 근관 성형시 근관형태 변화에 대한 비교연구
THE CHANGE OF CANAL CONFIGURATION AFTER INSTRUMENTATION BY SEVERAL NICKEL-TITANIUM FILES IN THE SIMULATED CANAL WITH ABRUPT CURVATURE 원문보기

大韓齒科保存學會誌 = Journal of Korean Academy of Operative Dentistry, v.30 no.4, 2005년, pp.303 - 311  

임중장 (전남대학교 치과대학 치과보존학교실 치의학 연구소) ,  김동준 (전남대학교 치과대학 치과보존학교실 치의학 연구소) ,  황윤찬 (전남대학교 치과대학 치과보존학교실 치의학 연구소) ,  황인남 (전남대학교 치과대학 치과보존학교실 치의학 연구소) ,  오원만 (전남대학교 치과대학 치과보존학교실 치의학 연구소)

초록
AI-Helper 아이콘AI-Helper

본 연구는 치근첨부위의 급한 만곡을 가진 근관에서 엔진구동형 니켈-타이타늄기구를 이용해 근관 성형시 근관형태 변화에 대한 비교 연구를 함으로써 어떤 기구가 근관의 본래 형태를 잘 유지하는가를 구명하기 위하여 시행되었다. $\sharp$15 finger spreader를 이용해 만곡된 근관의 주형을 형성하고 epoxy resin으로 모형 근관을 갖는 레진 블록 96개를 제작하였다. 모형 근관은 만곡의 반경이 1.5mm, 3.0mm, 4.0mm 및 6.0mm를 가지며, 근관의 만곡도는 90도로 제작하였다. 엔진구동형 니켈-타이탸늄 파일로 ProFile, ProTaper, Hero 642 그리고 $K^3$를 사용하였으며 크라운다운법을 이용하여 제조회사의 지시에 따라 300rpm으로 근관을 성형하였다 시술 전$\cdot$후 사진을 디지털 카메라를 이용하여 촬영한 후, 이미지분석기를 이용하여 근관의 변화량을 측정하였다. 근관의 만곡을 따라서 치근첨으로부터 1mm간격으로 계측점을 총 9부분을 설정하여 원래의 근관형태가 유지되는 정도를 측정하였다 각 계측점 에서 근관의 중심축의 변위량, 근관의 폭의 변화량을 측정하였다. 계측점에서 각 기구들간의 유의성은 Kruskal-Wallis 분석법을 이용하였고 기구간에 검정은 Mann-Whitney U-test분석법을 이용한 결과 급격히 만곡된 근관 성형시에 반경 1.5mm의 만곡에서는 엔진구동형 니켈-타이타늄 파일을 사용시 주의를 요하며, 반경 3.0mm 이상의 만곡에서는 다른 엔진구동형 니켈-타이타늄 파일보다는 ProFile의 사용이 권고된다.

Abstract AI-Helper 아이콘AI-Helper

The purpose of this study was to evaluate which type of Ni-Ti files are able to maintain canal configuration better in the simulated canal with abrupt curvature near it's apex. Ninety six simulated root canals were made in epoxy resin and $\sharp$15 finger spreader was used as root canal ...

주제어

참고문헌 (25)

  1. Mandel E, Yazdi MA, Benhamou LM, Lachkar T, Mesgouez C, Sobel M. Rotary Ni-Ti profile systems for preparing curved canals in resin blocks : influence of operator on instrument breakage. Int Endod J 32:436-443, 1999. 

  2. Bramante CM, Berbert A, Borges RP. A methodology for evaluation of root canal instrument. J Endod 13:243-245, 1987. 

  3. Royal JR, Donnelly JC. A comparison of maintenance of canal curvature using balanced-forced instrumentation with three difference file type. J Endod 21:300-304, 1995. 

  4. Esposito PT, Cunningham CJ. A comparison of canal preparation with nickel-titanium and stainless steel instruments. J Endod 21:173-176, 1995. 

  5. Walia H, Brantley WA, Gerstein H. An initial investigation of the bending and torsional properties of nitinol root canal files. J Endod 14:346-351, 1988. 

  6. Thompson SA, Dummer PMH. Shaping ability of Hero 642 rotary nickel-titanium instruments in simulated root canals: Part 1. Int Endod J 33:248-254, 2000. 

  7. 박한수, 이민구, 김종진, 임영준, 장문성, 이종엽. 'Three-File' 방식에 의한 만곡 근관 형성시 근관의 형태에 관한 연구. 대한치과보존학회지 25:494-497, 2000. 

  8. Coleman CL, Svec TA. Analysis of Ni-Ti versus stainless steel instrumentation in resin simulated canals. J Endod 23:232-235, 1997. 

  9. Hata GI, Uemura M, Kato AS, Imura N, Novo NF, Toda T. A comparison of shaping ability using ProFile, GT file, and Flex-R endodontic instruments in simulated canals. J Endod 28:316-321, 2002. 

  10. Bishop K, Dummer PMH. A comparison of stainless steel Flexofiles and nickel-titanium NiTiFlex files during the shaping of simulated canals. Int Endod J 30:25-34, 1997. 

  11. Park H. A comparison of Greater Taper files, ProFiles, and stainless steel files to shape curved root canals. Oral Surg Oral Med Oral Pathol Oral Radiol Endod 91:715-718, 2001. 

  12. James MG, Marden A, Carlos ER. Comparison of nickel-titanium and stainless steel hand-file instrumentation using computed tomography. J Endod 22:369-375, 1996. 

  13. 김영태, 백승호, 배광식, 임성삼, 윤수한. 세종류의 Stainless Steel File을 이용한 만곡근관 형성 후 근관형태 변화에 관한 비교 연구. 대한치과보존학회지 26:9-15, 2001. 

  14. Dummer PMH, Alodeh MHA. A method for the construction of simulated root canals in clear resin blocks. Int Endod J 24:63-66, 1991. 

  15. Kum KY, Spangberg L, Cha BY, Jung IY, Lee SJ, Lee CY. Shaping ability of three ProFile rotary instrumentation techniques in simulated resin root canals. J Endod 26:719-723, 2000. 

  16. Schafer E. Shaping ability of Hero 642 rotary nickel-titanium instruments and stainless steel hand K-Flexofiles in simulated curved root canals. Oral Surg Oral Med Oral Pathol Oral Radiol Endod 92:215-220, 2001. 

  17. Filho IB, Esberard RM, Leonardo RT, Rio CE. Microscopic evaluation of three endodontic files preand postinstrumentation. J Endod 24:461-464, 1998. 

  18. Thompson SA, Dummer PMH. Shaping ability of ProFile .04 taper series 29 rotary nickel-titanium instruments in simulated root canals. Part 1. Int Endod J 30:1-7, 1997. 

  19. Pruett JP, Clement DJ, Carnes DL. Cyclic fatigue testing of Nickel-Titanium endodontic instruments. J Endod 23:77-85, 1997. 

  20. Schafer E, Schlingemann R. Efficiency of rotary nickel-titanium K3 instruments compared with stainless steel hand K-Flexofile. Part2. Cleaning effectiveness and shaping ability in severely curved root canals of extracted teeth. Int Endod J 36:208-217, 2003. 

  21. Versumer J, Hulsmann M, Schafers F. A comparative study of root canal preparation using ProFile .04 and Lightspeed rotary Ni-Ti instruments. Int Endod J 35:37-46, 2002. 

  22. 박한수, 이민구, 김종진, 이종엽. Profile을 이용한 만곡근관 형성시 근관의 형태에 관한 연구. 대한치과보존학회지 24:633-637, 1999. 

  23. 임경아, 윤수한. Stainless Steel K-file, Profile .04와 Quantec LX를 이용한 만곡 근관 형성후의 근관형태의 변화에 관한 비교연구. 대한치과보존학회지 25:133-140, 2000. 

  24. Thompson SA, Dummer PMH. Shaping ability of ProFile .04 taper series 29 rotary nickel-titanium instruments in simulated root canals. Part 2. Int Endod J 30:8-15, 1997. 

  25. 이석종, 신영근, 황호길. 만곡근관의 확대시 기구에 따른 형태변화에 관한 연구. 대한치과보존학회지 24:503-510, 1999. 

저자의 다른 논문 :

섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로