최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국자동차공학회논문집 = Transactions of the Korean Society of Automotive Engineers, v.14 no.6, 2006년, pp.104 - 111
이대희 (인제대학교 기계자동차공학부) , 박성봉 (한양대학교 기계공학과) , 임창율 (인제대학교 기계공학과) , 김흥섭 (인제대학교 기계자동차공학부) , 이관수 (한양대학교 기계공학과)
A ventilated disc brake having spirally fluted surface has been proposed to improve the thermal judder by way of heat transfer enhancement. The local heat transfer coefficients were measured in the flow passage of disc brake. These measured local heat transfer data were utilized to do the finite ele...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
J. W. Baughn and X. Yan, 'Liquid Crystal Methods in Experimental Heat Transfer,' Proceedings, 32nd Heat Transfer and Fluid Mechanics Institute, pp.15-40, 1991
J. C. Han, Y. M. Zhang and C. P. Lee, 'Augmented Heat Transfer in Square Channels with Parallel, Crossed, and V-Shaped Angled Ribs,' ASME Transactions, Vol.113, pp.590-596, 1991
T. S. Ravigururajan and A. E. Bergles, 'General Correlations for Pressure Drop and Heat Transfer for Single Phase Turbulent Flow in Internal Ribbed Tubes,' Augmentation of Heat Transfer in Energy Systems. ASME HTD, Vol.52, pp.9-20, 1985
J. Yampolsky, P. A. Libby, B. E. Launder and J. C. LaRue, 'Fluid Mechanics and Heat Transfer in Spirally Fluted Tubing,' General Atomic Technology Report, GA-A17833, 1984
C. J. Craft, B. E. Launder and M. A. Leschziner, 'On the Prediction of Turbulent Flow in Sprally Fluted Tubes,' Fifth IAHR Conference on Refined-Flow Modelling and Turbulence Measurements, Paris, 1993
J. R. Barber, 'Thermoelastic Instabilities in the Sliding of Conforming Solids,' Proc. Roy. Soc. Series A312. pp.381-394, 1989
K. Lee and J. R. Barber, 'Frictionally Excited Thermoelastic Instability in Automotive Disk Brakes,' ASME Journal of Tribology, Vol.115, pp.607-614, 1993
D. L. Hartsock and J. W. Fash, 'Effect of Pad/caliper Stiffness, Pad Thickness, and Pad Length on Thermoelastic Instability in Disc Brake,' ASME Journal of Tribology, Vol.122, pp.511- 518, 2000
A. Floquet and M. C. Dubourg, 'Realistic Braking Operation Simulation of Ventilated Disk Brakes,' ASME Journal of Tribology, Vol.118, pp.466-472, 1996
A. Floquet and M. C. Dubourg, 'Nonaxisymmetric Effects for Three Dimensional Analysis of Brake,' ASME Journal of Tribology, Vol.116, pp.401-408, 1994
D. H. Lee, Y. S. Chung and D. S. Kim, 'Turbulent Flow and Heat Transfer Measurement on a Curved Surface with a Fully Developed Round Impinging Jet,' International Journal of Heat and Fluid Flow, Vol.18, pp.160-169, 1997
J. W. Baughn and X. Yan, 'Liquid Crystal Methods in Experiemental Heat Transfer,' Proceedings, 32nd Heat Transfer and Fluid Mechanics Institute, pp.15-40, 1991
S. K. Lee, B. Y. Sung and S. K. Ha, 'Optimal Design of Ventilated Disc Brake Rotor,' Transaction of KSME(A), Vol.24, No.3, pp.593-602, 2000
R. Limpert, Brake Design and Safety, SAE, Warrendale, pp.111-143, 1992
S. W. Gang, C. J. Kim, D. H. Lee and H. S. Kim, 'The Thermal Analysis of Brake Disc using the Solid Model and 2D Coupled Model,' Transactions of KSAE, Vol.17, No.7, pp.93-100, 2003
J. H. Choi, D. H. Kim, I. Lee, H. B. Cha and C. M. Kang, 'Transient Thermoelastic Analysis of Disk Brakes Using Finite Element Method,' Transactions of KSAE, Vol.10, No.5, pp.160- 167, 2002
※ AI-Helper는 부적절한 답변을 할 수 있습니다.