최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국자동차공학회논문집 = Transactions of the Korean Society of Automotive Engineers, v.14 no.1, 2006년, pp.25 - 30
옥진규 (부경대학교 기계공학부 대학원) , 백운경 (부경대학교 기계공학부) , 손정현 (부경대학교 기계공학부)
This study is about an optimum design to improve the kinematic and compliance characteristics of a torsion-beam suspension system. The kinematic and compliance characteristics of an initial design of the suspension was obtained through a roll-mode analysis. The objective function was set to minimize...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
T. O. Tak, 'Optimal Design of Vehicle Suspension Systems Using Sensitivity Analysis,' Transactions of KSAE, Vol.2, No.3, pp.50-61, 1994
W. Y. Kim, K. W. Ahn, C. S. Oh, W. G. Hwang and H. E. Im, 'A Study on Optimization of Hard Points for Double Wishbone Type Suspension,' Spring Conference Proceedings, KSAE, pp.897-902, 2002
S. J. Kim, C. J. Park and T. W. Park, 'Suspension Parameter Design Using a Design of Experiments,' Transactions of KSAE, Vol.4, No.1, pp.16-27, 1996
W. G. Hwang, W. Y. Kim and H. E. Im, 'Development of Optimal Design of Vehicle Suspension,' Transactions of KSAE, Vol.7, No.3, pp.339-347, 1999
G. Perna, M. Poian and C. Poloni, 'Multi Objective Optimization of a Car Vehicle Coupling FRONTIER and MDI-ADAMS,' 2000 European ADAMS Users Conference, 2000
T. Yamanaka, H. Hoshino and K. Motoyama, 'Design Optimization Technique for Suspension Mechanism of Automobile,' Seoul 2000 FISITA World Automotive Congress, F2000G 309, 2000
D. H. Lee, T. S. Kim and J. J. Kim, 'Optimum Design of Suspension Systems Using a Genetic Algorithm,' Transactions of KSAE, Vol.8, No.5, pp.138-147, 2000
W. T. Baek and H. G. Seong, 'A Study on the Improvement of Vehicle Ride Comport by Genetic Algorithms,' Transactions of KSAE, Vol.6, No.4, pp.76-85, 1998
VisualDOC 4.0 User's Manual, Vanderplaats Research & Development, Inc., U.S.A, 2004
A. D. Belegundu and T. R. Chandrupatla, 'Optimization Concepts and Applications in Engineering,' Prentice-Hall, NJ, 1999
G. C. Travaglio, 'Optimizing the Handling Behaviour of a Vehicle with McPherson Front Suspension and Twist Beam Rear Suspension Using ADAMS/Car,' 14th European ADAMS User Conference, 2000
D. C. Lee and J. H. Byun, 'A Study on the Structural Characteristics and Roll Behavior of Suspension for the Section Profile of Torsion Beam,' SAE 99370297, 1999
J. S. Kang, 'Kinematic Analysis of Torsion Beam Rear Suspension,' Transactions of KSAE, Vol.12, No.5, pp.146-153, 2004
※ AI-Helper는 부적절한 답변을 할 수 있습니다.