최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기제어·자동화·시스템공학 논문지 = Journal of control, automation and systems engineering, v.13 no.4, 2007년, pp.296 - 303
황이철 (동의대학교 메카트로닉스 공학과) , 박철재 (포스코 기술연구소)
This paper proposes a new width control system composed of an ANWC(Automatic Neural network based Width Control) and a fuzzy-PID controller in hot strip finishing mills which aims at obtaining the desirable width. The ANWC is designed using a neural network based width prediction model to minimize a...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
T. Shibahara, 'Edger set-up model at roughing train in hot strip mill,' ISIJ, vol. 67, no. 15, pp. 2509-2515, 1981
T. Sasaki, 'Mathematical model of width change in the hot strip finishing train,' CAMPISIJ, vol. 9, pp. 304-307, 1996
K. Yamada, S. Ogawa, and M. Ataka, 'Three dimensional analysis of at rolling using rigid-plastic finite element method coupled with roll deformation analysis,' NUMIFORM92, pp. 755-760, 1992
lsii, 'Analysis of width deviation for hot strip finishing mill,' Japan Society for Technology of Plasticity, pp. 219-222, 1992
C. J. Park and D. M. Lee, 'Input selection technology of neural network and its application for hot strip mill,' IFAC World Congress, 2005
A. Hacquin and P. Montmitonnet, 'Coupling of roll and strip deformation in three-dimensional simulation of hot rolling,' Simulation of Mat. Proc., pp. 921-927, 1995
A. Helmi and J. Alexander, 'Geometric factors affecting spread in hot at rolling of steel,' JISI, no. 206, pp. 1110-1117, 1968
A. Ishii, 'Variation of strip width during hot finishing rolling,' CAMP-ISIJ, vol. 9, pp. 300-303, 1996
J. Price, 'The hot strip mill looper system,' IEEE Transactions on Industry Applications, vol. IA-9, no. 5, pp. 556-562, 1973
A. Mizuta, H. Ibata, Y. Yamamoto, S. Saito, S. Honda, and M. Kitamura, 'Control method and its performance,' Transactions of the Iron and Steel Institute of Japan, vol. 26, p. B21, 1986
D. A. Davies, 'Application of hydraulic agc and width control to a hot strip mill,' Iron and Steel Engineer, vol. 66, no. 8, pp. 39-44,1989
Anon, 'A new roll force awc system for roughing train in hot strip mill,' Transactions of the Iron and Steel Institute of Japan, vol. 27, no. 12, p. 993, 1987
S. Nakamura, M. Takahashi, and Y. Chida, 'Slab width control for hot direct rolling,' Transactions of the Iron and Steel Institute of Japan, vol. 28, pp. 110-116, 1988
H. Yoneda, 'Development of accurate width control technology in hot strip finishing mill,' CAMP-ISIJ, vol. 9, pp. 312-315, 1996
T. Ogura, 'Advanced width control for hot finishing mill,' CAMP-lSIJ, vol. 9, p. 324, 1996
S. Murata, 'Development of width control technology in finishing line of hot strip mill,' CAMP-ISIJ, vol. 9, pp. 308-311, 1996
H. Senda, 'Development of the width control system in no.3 hot strip mill at Chiba Works,' CAMP-ISIJ, vol. 11, p. 356, 1998
T. Takahara, 'Improvement of width accuracy in Fukuyama no.1 hot strip mill,' CAMPISIJ, vol. 10, p. 391, 1997
JISF, The theory and practice of the steel rolling. JISF, 1983
H. lmanari, Y. Morimatsu, K. Sekiguchi, H. Ezure, R. Matuoka, A. Tokuda, and H. Otobe, 'Looper H-Infinity control for hot strip mills,' IEEE Transactions on Industry Applications, vol. 33, no. 3, pp. 790-796, 1997
J. W. Lee, W. H. Kwon, and J. H. Choi, 'On stability of constrained receding horizon control with finite terminal weighting matrix,' Automatica, vol. 34, no. 12, pp. 1607-1612, 1998
D. Yu, J. Gomm, and D. Williams, 'Neural model input selection for a mimo chemical process,' Engineering Applications of Artificial intelligence, vol. 13, pp. 15-23, 2000
W. Wu and D. Massart, 'Artificial neural networks in classification of NIR spectral data : Selection of the input,' Chemometrics and Intelligent Laboratory Systems, vol. 35, pp. 127-135,1996
A. Back and T. Trappenberg, 'Selecting inputs for modeling using normalized higher order statistics and independent component analysis,' IEEE Transactions on Neural Networks, vol. 12, no. 3, pp. 612-617, 2001
C. Ledoux and J. Grandin, 'Two original weight pruning methods based on statistical tests and rounding techniques,' lEE Proc. Vision, Image Signa! Process. vol. 141, no. 4, pp. 230-236, 1994
R. Reed, 'Pruning algorithms: a survey,' IEEE Trans. Neural Netw. , vol. 4, no. 5, pp. 740-747, 1993
J. Luo, B. Hu, X. Ling, and R, Liu, 'Principal independent component analysis,' IEEE Transactions on Neural Networks, voI. 10, no. 4,pp.912-917,1999
N. Kambhatla and T. Leen, 'Dimension reduction by local principal component analysis,' Neural Comput., vol. 9, no. 7, pp. 1493-1516,1997
S. Ross, Introduction to Probability and Statistics for Engineers and Scientists, Academic Press, 2000
S. Z. He, 'Fuzzy self-tuning of PID controller,' Fuzzv Sets and Systems, pp. 37-46,1993
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.