참고문헌 (30)

1. Tuckerman, D. B., Pease, R. F. W., 1981, 'High-Performance Heat Sinking for VLSI,' IEEE Electron Device Lett. EDL-2, pp. 126-129 

2. Tuckerman, D. B., 1984, 'Heat Transfer Microstructures for Integrated Circuits,' Ph. D. Thesis, Stanford University 

3. Samalam, V. K., 1989, 'Convective Heat Transfer In Microchannels,' J. Electron Mater. 18, pp. 611-617 

   상세보기

4. Kawano, K., Minakami, K., Iwasaki, H. and Ishizuka, M. 1998, 'Application of Heat Transfer in Equipment Systems, and Education,' in: Development of Microchannels Heat Exchanging, R.A. Nelson Jr., Swanson, L.W., M. Bianchi, V.A. and Camci, C. Eds., New York, ASME, HTD-361-3/PID-3, pp. 173-180 

5. Rahman, M. And Gui, M. F., 1993, 'Experimental Measurements Of Fluid Flow and Heat Transfer in Microchannel Cooling Passages in A Chip Substrate,' Adv. Electron. Packag., ASME EEP-4(2), pp.685-692 

6. Rahman, M. M. and Gui, F., 1993, 'Design Fabrication and Testing Of Microchannel Heat Sink for Aircraft Avionics Cooling,' in: Proceedings of The 28th Intersociety Energy Conversion Eng. Conf. 1, pp. 1-6 

7. Qu Weilin, Mala, Gh. M., and Dongqing, Li., 2000, 'Pressure-Driven Water Flows in Trapezoidal Silicon Microchannels,' Int. J. Heat Mass Transf. Vol. 43 No. 3, pp. 353-364 

   상세보기

8. Qu Weilin, Mala, Gh. M. and Dongqing, Li, 2000, 'Heat Transfer for Water Flow in Trapezoidal Silicon Microchannels,' Int. J. Heat Mass Transf. Vol. 43 No.21, pp. 3925-3936 

   상세보기

9. Wu, H. Y. and Cheng, P., 2003, 'Friction Factors in Smooth Trapezoidal Silicon Micro Channels with Different Aspect Ratios,' Int. J. Heat Mass Transf.,Vol. 46 No.14, pp. 2519-2525 

   상세보기

10. Wu, H. Y. and Cheng, P., 2003, 'an Experimental Study of Convective Heat Transfer in Silicon Micro Channels with Different Surface Conditions,' Int. J. Heat Mass Transf.,Vol. 46 No.14, pp. 2547-2556 

    상세보기

11. Liu, D. and Gerimella, S. V., 2005, 'Analysis and Optimization of The Thermal Performance of Microchannel Heat Sinks,' International Journal for Numerical Methods In Heat and Fluid Flow., Vol.15 No.1, pp. 7-26 

    상세보기

12. Gerimella, S. V. and Sobhan, C. B., 2003, 'Transport in Micro Channels-A Critical Review,' Annu. Rev. Heat Tansf., Vol 13, pp. 1-50 

    상세보기

13. Knight, R. W., Hall, D. J., Goodling, J. S. and Jaeger, R. C., 1992, 'Heat Sink Optimization with Application to Micro Channels,' IEEE Trans. Compon., Hybrids, Manufact. Technol., Vol.15 No.5, pp. 832-842 

    상세보기

14. Wei, X. J. and Joshi, Y., 2003, 'Optimization Study of Stacked Micro-Channel Heat Sinks for Micro-Electronic Cooling,' IEEE Trans. Compon. Packag. Technol., Vol.26 No.1, pp. 55-61 

    상세보기

15. Fisher, T. S. and Torrance, K. E., 2001, 'Optimal Shapes of Fully Embedded Channels for Conjugate Cooling,' IEEE Trans. Adv. Packag., Vol.24 No.4, pp 555-562 

    상세보기

16. Weisberg, A., Bau, H. H. and Zemel, J. N., 1992, 'Analysis of Micro Channels for Integrated Cooling,' Int. J. Heat Mass Transf., Vol. 35 No.10, pp. 2465-2474 

    상세보기

17. Qu, W. and Mudawar, I., 2002, 'Analysis of Three Dimensional Heat Transfer in Micro-Channel Heat Sinks,' Int. J. Heat Mass Transf., Vol.45 No 19, pp. 3973-3985 

    상세보기

18. Toh, K. C., Chen, X. Y. and Chai, J. C., 2006, 'Numerical Computation of Fluid Flow and Heat Transfer in Microchannels,' Int. J. Heat Mass Transf., 45 (2002) 5133-5141 

    상세보기

19. Li, J. and Peterson, G. P., 'Geometric Optimization of a Micro Heat Sink With Liquid Flow,' IEEE Trans. Compon. Packag. Technol., Vol.29 No.1, pp145-154 

    상세보기

20. Vanderplaats, G. N., 1984, 'Numerical Optimization Techniques for Engineering Design with Applications,' New York, Mcgraw-Hill 

21. Queipo, N. V., Haftka, R. T., Shyy, W., Goel, T., Vaidyanathan, R. and Tucker, P. K., 2005, 'Surrogate-Based Analysis and Optimization,' Progress in Aerospace Sciences.,Vol. 41 pp1-28 

    상세보기

22. Madou, M. J., MEMS Fabrication, in The MEMS Handbook, M. Gad-El-Hak, Ed. Boca Raton, FL: CRC, 16-1, 2002 

23. Laermer, F., Urban, A. and Challenges., 2003, 'Developments and Applications of Silicon Deep Reactive Ion Etching,' Microelectron, Eng. 67-68 pp 349-355 

    상세보기

24. CFX-5.7 Solver Theory, ANSYS 2004 

25. Patankar, S. V., 1980, 'Numerical Heat Transfer and Fluid Flow,' Mcgraw-Hill, New York, pp. 124-134 

26. Shah, R. K. and London, A. L., 1978, 'Laminar Flow Forced Convection in Ducts: A Source Book for Compact Heat Exchanger Analytical Data,' Supl. I, Academic Press, New York 

27. Sadk Kakac, Ramesh K. and Shah, Win Aung., 1987, 'Handbook of Single-Phase Convective Heat Transfer,' a Wiley-Interscience Publication, New York 

28. Lophaven, S. N., Nielsen, H. B. and Sondergaard, J., 2002, 'a MATLAB Kriging Toolbox,' Technical Report IMM-TR2002-12 

29. Husain, A. and Kim, K. Y., 'Thermal Optimization of a Microchannel Heat Sink With Trapezoidal Cross-Section,' Submitted to International Journal of Heat and Mass Transfer 

    상세보기

30. Kawano K., Sekimura, M., Minakami, K., Iwasaki H. and Ishizuka, M., 2001, 'Development of Micro Channel Heat Exchanging,' JSME Int. Journal Series B 44(4)., pp. 592-598 

    상세보기

저자의 다른 논문 :

아프잘 후세인 (4) 김광용 (137)