최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓溶接·接合學會誌 = Journal of the Korean Welding and Joining Society, v.25 no.4, 2007년, pp.49 - 57
이형근 (한밭대학교 신소재공학부 생산가공공학)
The optimization of the cladding parameters was studied to maximize the deposition efficiency in the laser cladding using a low power pulsed Nd:YAG laser. STS304 stainless steel plate and Co alloy powder were used as a substrate and powder for cladding, respectively. The six cladding parameters were...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
F. Vollertsen, K. Partes, J. Meijer: Lasers in Manufacturing 2005, Proceeding of the third international WLT-conference on lasers in manu- facturing 2005, Munich, June 2005, 281-305
S. H. Wang, J. Y. Chen, L. Xue: A study of the abrasive wear behavior of laser-clad tool steel coatings, Surf. Coat. Technol. 200 (2006) 3446-3458
C. P. Paul, A. Jain, P. Ganesh, J. Negi, A. K. Nath: Laser rapid manufacturing of colmonoy-6 components, Optics and Lasers in Engineering, 44 (2006) 1096-1109
G. Bi, B. Schurmann, A. Gasser, K. Wissenbach, R. Poprawe: Int. J. Machine Tools & Manufacture 47 (2007) 555-561
J. C. Ion, Laser processing of engineering materials, Elsevier Butterworth-Heinemann, Oxford, 2005, 296- 326
S. Sun, Y. Durandet, M. Brandt, Parametric investigation of pulsed Nd:YAG laser cladding of stellite 6 on stainless steel, Surf. Coat. Technol. 194 (2005) 225-231
P. J. Ross, Taguchi techniques for quality engineering, second ed., McGraw-Hill, New York, 1996
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.