최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓土木學會論文集, Journal of the Korean Society of Civil Engineers. A. 구조공학, 원자력공학, 콘크리트공학, v.28 no.1A, 2008년, pp.59 - 67
최동호 (한양대학교 공과대학 토목공학과) , 이상훈 (한양대학교 토목공학과, 한국전력기술(주)) , 고정훈 (한양대학교 토목공학과)
Acceleration time history used in the seismic analysis of nuclear power plant structures should envelop a target power spectral density (PSD) function in addition to the design response spectrum in order to have sufficient energy at each frequency for the purpose of ensuring adequate load. The safet...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
응답스펙트럼 해석법은 어떤 방법으로 사용되어 왔는가? | 응답스펙트럼 해석법은 지진하중과 같은 동하중에 대한 구조물의 동적 응답량을 얻기 위한 해석방법으로 사용되어 왔다. 이때 지진응답해석의 입력하중은 지진하중에 대한 단자유도계의 응답을 진동수와 감쇠특성으로 간단히 표현한 응답스펙트럼이 사용된다. | |
원자력 분야의 지진응답해석에서는 시간이력함수의 PSD함수를 계산하여 규제기준에서 제시한 최소 PSD함수의 포괄을 명시함으로써 입력 하중의 안전을 강화하고 있는 이유는? | 1). 그 이유는 내진설계에서 시간이력 함수에 대한 PSD함수 요건을 추가함으로써 시간이력의 응답스펙트럼은 물론 진동수 별로 에너지가 충분하지 않은 입력운동을 지진응답해석에서 사용할 수 없도록 하기 위함이다(Lee 등, 1993). | |
원전 구조물의 내진해석에서 사용하는 시간이력 함수가 각각의 진동수에서 일정 크기 이상의 에너지를 갖고 있어야 하는 이유는? | 원전 구조물의 내진해석에서 사용하는 시간이력 함수는 적절한 하중을 보장하기 위하여 설계응답스펙트럼에 부합할 뿐만 아니라 최소 PSD함수 이상의 PSD함수를 갖도록 함으로서 각각의 진동수에서 일정 크기 이상의 에너지를 갖고 있어야 한다. 도로교 구조물에서도 구조물의 대형화와 정교화로 인한 구조물의 공공 기능의 안전성이 더욱 강조되어, 설계 목적의 PSD함수의 규정이 필요하지만 적절한 절차가 개발이 되지 않아 현실적으로 적용하기 어려운 실정이다. |
건설교통부(2005) 도로교설계기준
대한토목학회(2005) 케이블강교량설계지침(안)
Bendat, J.S. and Piersol, A.G. (1986) Random Data - Analysis and Measurement Procedure. 2nd Ed., John Wiley & Sons, New York
Choi, D.-H. and Lee, S.-H. (2006) Multi-damping earthquake design spectra-compatible motion histories. Nuclear Engineering and Design, Vol. 226, No. 12., pp. 221-230
Gasparini, D.A. and Vanmarcke, E.H. (1976) Simulated Earthquake Motions Compatible with Prescribed Response Spectra, Evaluation of Seismic Safety of Buildings Report No. 2, Publication No. R76-4, Dept. of Civil Eng., MIT, Cambridge, Massachusetts
Lee, Y.I., Kim, J.S., Lee, S.H., and Rieck, P.J. (1993) Impact of power spectral density function licensing requirement on Replicate Nuclear Power Plant Seismic Design. 12th International Conference on Structural Mechanics in Reactor Technology, K01/7, pp. 31-36
Mertens, P.G. and Preumont, A. (1997) Improved generation and application of artificial time histories and PSD functions Trans. of the 14th International Conference on Structural Mechanics in Reactor Technology, Lyon, France, pp. 333-341
Park, Y.J. (1992) Nonlinear 3-D piping analysis under stochastic dynamic Loads: response spectrum approach, ASME/PVP Conf., ASME, NewYork, N.Y., Vol. 237-1, pp. 217-222
Park, Y.J. (1995) New conversion method from response spectrum to PSD functions. Journal of Engineering Mechanics, Vol. 121, No. 12
Pfaffinger, D.D. (1983) Calculation of power spectra from response spectra J. of Engrg. Mech. Div., ASCE, Vol. 115, No. 1, pp. 357-372
Philippacopoulos, A. J. (1989) Recommendations for Resolution of Public Comments on USI A-40, Seismic Design Criteria, NUREG/CR-5347, U.S. Nuclear Regulatory Commission, Brookhaven National Laboratory
Shinozuka, M., Mochio, T., and Samaras, E.F. (1988) Power Spectral Density Functions Compatible with NRC Regulatory Guide 1.60 Response Spectra, NUREG/CR-3509, Department of Civil Engineering and Engineering Mechanics, Columbia University in the City of New York
U.S. NRC (1973) Design Response Spectra for Seismic Design of Nuclear Power Plants, Regulatory Guide 1.60, Rev. 1
U.S. Nuclear Regulatory Commission (1989) Standard Review Plan- Section 3.7.1, Revision 2
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.