최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓土木學會論文集, Journal of the Korean Society of Civil Engineers. A. 구조공학, 원자력공학, 콘크리트공학, v.28 no.5A, 2008년, pp.641 - 647
김병화 (경남대학교 토목공학과) , 박종칠 (한국도로공사 도로교통연구원)
This paper introduces a new technique that can extract natural frequencies and damping ratios from output-only vibration data. Firstly, the free vibration data is obtained from the cross correlations of the output-only response data using a singular value decomposition process. Secondly, the well-kn...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
구조응답만을 이용하여 구조물의 고유진동수와 감쇠비를 추출하는 방법의 기존의 방법들은 어떤 절차를 거치며, 어떤 약점이 있는가? | 기존의 방법들은, 상시진동에 따른 구조응답으로부터 자유 진동함수의 특성을 갖는 RD(Random Decrement)함수를 추출하고, 추출된 RD함수로부터 고유진동수와 감쇠비를 추정 하는 것이 일반적 절차이다. 그러나 RD함수의 정상성 가정 (stationary assumption)을 만족 시키려면 장기간의 데이터수집이 불가피하며, 계측점마다 추정된 고유진동수 및 감쇠비가 다소 차이가 있을 수 있다. 이러한 약점에 대해서, RD함수가 아닌 두개의 계측점들 사이의 상호상관(cross correlation)함수를 이용하는 NExT(Natural Excitation Technique)기법(James 등 1993)이 그 대안으로서 주목된다. | |
구조응답만을 이용하여 구조물의 고유진동수와 감쇠비를 추출하는 방법에 대해 시간영역방법과 주파수영역방법에는 무엇이 있는가? | 구조응답만을 이용하여 구조물의 고유진동수와 감쇠비를 추출하는 방법은, 이용하는 응답특성에 따라서 시간영역방법과 주파수영역방법으로 크게 분류할 수 있다. 시간영역방법은 로그법(logarithm decrement technique, Chopra 1995), ITD기법(Ibrahim and Mikulick, 1997), ERADC기법(Juang 1994), SSI기법(Peeters and Roeck 2000) 등이 대표적이라 할 수 있고, 주파수영역의 대표적인 방법들은 PP기법(Peak picking, Bendat and Piersol 1980)과 하프파워법(half-power bandwidth, Clough and Penzien 1993) 및 FDD기법(Brinker 등 2000) 등을 포함한다. | |
구조응답만을 이용하여 구조물의 고유진동수와 감쇠비를 추출하는 방법은 어떤 기준에 따라 어떻게 분류할 수 있는가? | 교량과 같은 대형 토목구조물은 입력신호의 계측이 용이치 않기 때문에, 구조응답만을 이용하여 고유진동수와 감쇠 비를 추정하여야 한다. 구조응답만을 이용하여 구조물의 고유진동수와 감쇠비를 추출하는 방법은, 이용하는 응답특성에 따라서 시간영역방법과 주파수영역방법으로 크게 분류할 수 있다. 시간영역방법은 로그법(logarithm decrement technique, Chopra 1995), ITD기법(Ibrahim and Mikulick, 1997), ERADC기법(Juang 1994), SSI기법(Peeters and Roeck 2000) 등이 대표적이라 할 수 있고, 주파수영역의 대표적인 방법들은 PP기법(Peak picking, Bendat and Piersol 1980)과 하프파워법(half-power bandwidth, Clough and Penzien 1993) 및 FDD기법(Brinker 등 2000) 등을 포함한다. |
김병화, 문석용, 배인환, 박대효 (2007) 진동기반 SI 기법을 이용한 현수교 행어의 장력추정 : II. 현장적용. 대한토목학회논문집, 대한토목학회, 제27권, 제2A호, pp. 173-179
박대효, 문석용, 주환중, 김병화 (2007) 진동기반 SI 기법을 이용한 현수교 행어의 장력추정 : I. 이론. 대한토목학회논문집, 대한토목학회, 제27권, 제2A호, pp. 165-172
장한택, 김병화, 박대효 (2008) 진동기반 SI 기법을 이용한 현수교 행어의 장력추정 : III. 실험적 검증. 대한토목학회논문집, 대한토목학회, 제28권, 제2A호, pp. 215-222
Bendat, J.S. and Piersol, A.G. (1980) Engineering Applications of Correlation and Spectral Analysis. Wiley, New York, pp. 181-186
Brinker, R., Zhang, L., and Anderson, P. (2000) Modal identification from ambient responses using frequency domain decomposition. Proc. 18th International Modal Analysis Conference, San Antonio, TX, pp. 625-630
Chen, C.-T. (1999) Linear System Theory and Design. 3rd Ed., Oxford University Press, NY
Chopra, A.K. (1995) Dynamics of Structures. Prentice-Hall, NJ
Clough, R.W. and Penzien, J. (1993) Dynamics of Structures. 2nd Ed., McGraw-Hill, NY
Farrar, C.R. and James III, G.H. (1997) System identification from ambient vibration measurements on bridge. Journal of Sound and Vibration, Vol. 205, No. 1, pp. 1-18
Ibrahim, S.R. and Mikulick, E.C. (1977) A method for the identification of vibration prameters from the free responses. Shock and Vibration Bulletin, Vol. 47, No. 4, pp. 183-198
James III, G.H., Carne, T.G., and Lauffer, J.P. (1993) The natural excitation technique (NExt) for modal parameter extraction from operating wind turbines. Sandia National Laboratory, Report SAND92-1666
Juang, J.-N. (1994) Applied System Identification. Prentice-Hall, Englewood Cliffs, NJ
Kim, B.H., Park, T., and Stubbs, N. (2005) A new method to extract modal parameters using output-only responses. Journal of Sound and Vibration, Vol. 282, No. 1, pp. 215-230
Kim, B.H., Park, T., and Voyiadjis, G.Z. (2006) Damage estimation on beam-like structures using the multi-resolution analysis. International Journal of Solids and Structures, Vol. 43, pp. 4238-4257
Kim, B.H. and Park, T. (2007) Estimation of cable tension force using the frequency-based system identification method. Journal of Sound and Vibration, Vol. 304, pp. 660-676
Kim, J.T. and Stubbs, N. (1995) Model-uncertainty impact and damage-detection accuracy in plate girder. Journal of Structural Engineering, ASCE, Vol. 121, No. 10, pp. 1409-1417
Peeters, B. and Roeck De G. (2000) Reference based stochastic subspace identification in civil engineering. Inverse Problems in Engineering, Vol. 8, No. 1, pp. 47-74
Stubbs, N. (1985) A General theory of non-destructive damage detection in structures. Proc. of the 2nd International Symposium on Structural Control, University of Waterloo, Ontario, Canada, H.H.H. Leipholz, ed., Martinus Nijhoff Publishers, Dordrecht, Netherlands, pp. 694-713
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.