최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국세라믹학회지 = Journal of the Korean Ceramic Society, v.45 no.9 = no.316, 2008년, pp.537 - 543
채수호 (서울시립대학교 신소재공학과) , 김영욱 (서울시립대학교 신소재공학과) , 송인혁 (재료연구소) , 김해두 (재료연구소) , 배지수 ((주)영진세라믹스)
Effect of template size ratio on porosity and mechanical properties of porous zirconia ceramics were investigated using two different size (
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
V. Biasini, M. Parasporo, and A. Bellosi, "Fabrication and Characterization of $Al_2O_3$ Porous Bodies by Hot Isostatic Pressing," Thin Solid Films, 297 207-11 (1997)
Y. P. Jin and Y. T. Chou, "Thermal and Mechanical Properties of Porous Y-PSZ/Zircon Composites," Mater. Res. Innovat., 1 227-30 (1998)
J. Adler, "Ceramic Diesel Particulate Filters," Int. J. Appl. Ceram. Technol., 2 [6] 429-39 (2005)
M. Fukushima, Y. Zhou, H. Miyazaki, Y. Yoshizawa, K. Hirao, Y. Iwamoto, S. Yamazaki, and T. Nagano, "Microstructural Characterization of Porous Silicon Carbide Membrane Support with and without Alumina Additive," J. Am. Ceram. Soc., 89 [5] 1523-29 (2006)
Y.-W. Kim, S. H. Kim, C. Wang, and C. B. Park, "Fab rication of Microcelluar Ceramics Using Gaseous Carbon Dioxide," J. Am Ceram. Soc., 86 [12] 2231-33 (2003)
J. H. Eom and Y.-W. Kim, "Fabrication of Silicon Oxycarbide Foams from Extruded Blends of Polysiloxane, Low- Density Polyethylene (LDPE), and Polymer Microbead," Met. Mater. Int., 13 [6] 521-25 (2007)
B. H. Yoon, E. J. Lee, H. E. Kim, and Y. H. Koh, "Highly Aligned Porous Silicon Carbide Ceramics by Freezing Polycarbosilane/ Camphene Solution," J. Am. Ceram. Soc., 90 [6] 1753-59 (2007)
Y.-W. Kim, S. H. Kim, I. H. Song, H. D. Kim, and C. B. Park, "Fabrication of Open-Cell, Microcellular Silicon Carbide Ceramics by Carbothermal Reduction," J. Am. Ceram. Soc., 88 [10] 2949-51 (2005)
Y.-W. Kim, J. H. Eom, C. Wang, and C. B. Park, "Processing of Porous Silicon Carbide Ceramics from Carbon- Filled Polysiloxane by Extrusion and Carbothermal Reduction," J. Am. Ceram. Soc., 91 [4] 1361-64 (2008)
I. K. Jun, Y. H. Koh, J. H. Song, S. H. Lee, and H. E. Kim, "Improved Compressive Strength of Reticulated Porous Zirconia Using Carbon Coated Polymeric Sponge As Novel Template," Mater. Lett., 60 2507-10 (2006)
A. K. Gain and B. T. Lee, "Microstructure Control of Continuously Porous $t-ZrO_2$ Bodies Fabricated by Multi-Pass Extrusion Process," Mater. Sci. & Eng. A, 419 269-75 (2006)
B. Nait-Ali, K. Haberko, H. Vesteghem, J. Absi, and D. S. Smith, "Thermal Conductivity of Highly Porous Zirconia," J. Europ. Ceram. Soc., 26 3567-74 (2006)
A. K. Gain, H. Y. Song, and B. T. Lee, "Microstructure and Mechanical Properties of Porous Yttria Stabilized Zirconia Ceramic Using Poly Methyl Methacrylate Powder," Scripta Mater., 54 2081-85 (2006)
Z. Y. Deng, J. F. Yang, Y. Beppu, M. Ando, and T. Ohji, "Effect of Agglomeration on Mechanical Properties of Porous Zirconia Fabricated by Partial Sintering," J. Am. Ceram. Soc., 85 [8] 1961-65 (2002)
J. H. Eom, Y.-W. Kim, I. H. Song, and H. D. Kim, "Microstructure and Properties of Porous Silicon Carbide Ceramics Fabricated by Carbothermal Reduction and Subsequent Sintering Process," Mater. Sci. Eng. A, 464 129-34 (2007)
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
저자가 APC(Article Processing Charge)를 지불한 논문에 한하여 자유로운 이용이 가능한, hybrid 저널에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.