최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Journal of the Ergonomics Society of Korea = 大韓人間工學會誌, v.28 no.3, 2009년, pp.125 - 134
윤훈용 (동아대학교 산업경영공학과) , 김은식 (동아대학교 산업경영공학과)
The muscle strengths in various postures are used in our daily life with or without our recognition. Also, many works are still performed with strengths, although mechanization and automation have been fairly accomplished at the industry site. Since the late seventies, various body measurements have...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
동적 근력인 등장성 근력, 등가속 근력, 등관석 근력에 대한 설명은? | 동적 근력은 근육의 수축 및 이완작업에 의해 근육의 힘을 자발적으로 발휘할 때의 최대 근력을 말하며, 등장성 근력(Isotonic strength), 등가속 근력(Isokinetic strength), 등관성 근력(Isoinertial strength)으로 나뉜다. 등장성 근력(Isotonic strength)은 근육이 일정한 힘에 반하여 수축하는 것으로서 근육의 긴장도가 전 동작을 통해 일정하게 유지되는 상태에서의 힘이고 등가속 근력(Isokinetic strength)은 근육이 일정한 속도로 수축하는 것으로서 동작에 관련된 신체 부분이 일정한 속도로 수축할 때의 근력을 말한다. 등관성 근력(Isoinertial strength)은 인간이 어느 일정한 구간을 자신이 정한 자유로운 속도에 의해 취급할 수 있는 최대 무게를 측정하여 초기 정적 저항을 극복하는 능력을 보여주는 근력을 말한다. | |
인간의 근력은 어떻게 정의할 수 있나? | 인간의 근력은 음식, 글리코겐, 지방, 탄수화물, 물 등에서 얻어진 화학 에너지가 기계적 운동 에너지로 변화하는 것으로 정의될 수 있으며(Damon et al., 1971), 신체능력의 주된 척도로서 정적 근력(Static strength)과 동적 근력(Dynamic strength)으로 나누어 볼 수 있다. | |
근력은 어떻게 나눠서 볼 수 있나? | 인간의 근력은 음식, 글리코겐, 지방, 탄수화물, 물 등에서 얻어진 화학 에너지가 기계적 운동 에너지로 변화하는 것으로 정의될 수 있으며(Damon et al., 1971), 신체능력의 주된 척도로서 정적 근력(Static strength)과 동적 근력(Dynamic strength)으로 나누어 볼 수 있다. 정적 근력은 근육의 수축 및 이완작용 없이 근육의 힘을 자발적으로 발휘할 때의 최대 근력이며, 등척성 근육(Isometric strength)활동을 최대로 발휘함으로써 비트는 힘 또는 완력을 산출하는 능력이라고 정의할 수 있다(Chaffin, 1975). |
한국과학기술연구소, "산업의 표준치설정을 위한 국민체위조사 연구", BSG 379-1442-7, 1980.
기술 표준원, 제5차 한국인 인체치수조사사업 보고서, 2004. 11.
기술 표준원, 한국인에 대한 근력 측정조사사업 보고서, 2007. 11.
한국표준연구소, 1986년 국민표준조사, KSRI-86-56-IR, 1986.
Allread, W. G., Marras, W. S and Parnianpour, M., Trunk kinematics ofone-handed lifting, and the effects of asymmetry and load weight,Ergonomics, 39(2), 322-334, 1996.
Asmussen, E. and Heeboll-Nielsen, K., Isometric muscle strength of adultmen and women, Testing and Observation Institute of the DanishNational Association for Infantile Paralysis, Communication, 11, 1-43,1961.
Asmussen, E. and Heeboll-Nielsen, K., Isometric muscle strength inrelation to age in men and women, Ergonomics, 5, 167-169, 1962.
Ayoub, M. M. and El-Bassoussi, M. M., Dynamic biomechanical modelfor sagittal plane lifting activities, C.G. Drury (Ed.) Safety in ManualMaterials Handling (Cincinnati, Ohio; DHEW (NIOSH) PublicationNo, 78-105), 88-95, 1978.
Chaffin, D. B, Human strength capability and low-back pain, Journal ofOccupational Medicine, 16, 248-254, 1974.
Chaffin, D. B., Ergonomics Guide for the Assessment of Human StaticStrength, American of Human Association Journal, 36(7), 505-511,1975.
Chaffin, D. B., Herrin, G. D., Keyserling, W. M. and Foulke, J. A.,Pre-employment Strength Testing in Selecting Workers for MaterialsHandling Jobs (Cincinnati: National Institute for Occupational Safetyand Health), Publication CDC-99-74-62, 1977.
Chaffin, D. B. and Andersson, G. B. J., Occupational Biomechanics (NewYork: John Wiley), 1984.
Damon, A., Stoudt, H. W., and Mcfarland, R. A., The Human Body inEquipment design, Havard University press, 1971.
Kamon, E., Kiser, D. and Pytel, J., Dynamic and static lifting capacity andmuscular strength of steelmill workers, American Industrial HygieneAssociation Journal, 43, 853-857, 1982.
Koyl, L. F. and Hanson, P. M., Age, Physical Ability and Work Potential,National Council on Aging Report, 1969
Kraus, H., Prevention of low back pain. Journal of Occupational Medicine,9, 555-559, 1967.
Laubach, L. L., Kroemer, K. H. E. and Thordsen, M. L., Relationships amongisometric force measured in aircraft control locations, AerospaceMedicine, 43(7), 738-742, 1972.
Mital, A., Comprehensive maximum acceptable weight of lift database forregular 8-hour workshifts, Ergonomics, 27, 1127-1138, 1984a.
Mital, A., Maximum weights of lift acceptable to male and female industrialworkers for extended workshifts, Ergonomics, 27, 1115-1126, 1984b.
Mital, A., Ayoub, M. M., Asfour, S. S. and Bethea, N. J., Relationshipbetween lifting capacity and injury in occupations requiring lifting,Proceedings of the 22nd Annual Meeting of the Human FactorsSociety, 469-473, 1978.
Mital, A. and Manivasagan, I., Development of non-linear polynomials inidentifying human isometric strength behavior, International Journalof Computers and Industrial Engineering, 8, 1-9, 1984.
Mital, A., Karwowski, W., Mazouz, A. K. and Orsarh, E., Prediction ofmaximum weight of lift in the horizontal and vertical planes usingsimulated job dynamic strength, American Industrial HygieneAssociation Journal, 47, 288-291, 1986.
Mortimer, R. G., Foot brake pedal force capability of drivers, Ergonomics,17, 509-513, 1974.
Nordgren, B., Anthropometric measures of muscle strength in youngwomen, Scandinavian Journal of Rehabilitation Medicine, 4, 165-169,1972.
Laubach, L. L., Comparative muscular strength of men and women: areview of the literature, Aviation, Space and Environmental Medicine,47, 534-542, 1976.
Petrofsky, J. S. and Lind, A. R., Isometric strength, endurance, and the bloodpressure and heart rate responses during isometric exercise in healthymen and women, with special reference to age and body fat content,Pflugers Archiv European Journal of Physiology, 360, 49-61, 1975.
Pheasant, S. T. and Grieve, D. W., The principal features of maximalexertion in the sagittal plane, Ergonomics, 24, 327-338, 1981.
Pytel, J. L. and Kamon, E., Dynamic strength test as a predictor formaximal and acceptable lifting, Ergonomics, 24, 663-672, 1981.
Rohmert, W., Wangenheim, M., Minzer, J., Zipp, P. and Lesser, W., A studystressing the need for a static postural force model for work analysis,Ergonomics, 29(10), 1235-1249, 1996.
Snook, S. H., The design of manual handling tasks, Ergonomics, 21, 963-985, 1978a.
Snook, S. H., The design of manual handling tasks, Paper presented at Ergonomics Society Lecture, Cranfield Institute of Technology,Bedfordshire, England, 1978b.
Snook, S. H. and Ciriello, V. M., Maximum weights and work loadsacceptable to female workers, Journal of Occupational Medicine, 16,527-534, 1974.
Troup, J. D. G. and Chapman, A. E., the strength of the flexor and extensormuscles of the trunk, Journal of Biomechanics, 2, 49-62, 1969.
Rowe, M. L. Low back pain in industry: a position paper, Journal ofOccupational Medicine, 11, 161-169, 1969.
Rowe, M. L., Low back pain in industry: updated position, Journal ofOccupational Medicine, 13, 476-478, 1971.
Rowe, M. L., Backahe at Work(Fairport), New York: Perinton Press, 1983.
Yates, J. W., Kamon, E., Rodgers, S. H. and Champney, P. C, Static liftingstrength and maximal isometric voluntary contractions of back, armand shoulder muscles, Ergonomics, 23, 37-47, 1980.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.