최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓溶接·接合學會誌 = Journal of the Korean Welding and Joining Society, v.27 no.2, 2009년, pp.69 - 75
장진영 (부산대학교 재료공학부) , 최우남 (하이브리드소재솔루션 국가핵심연구센터) , 정병훈 (성우하이텍 기술연구소) , 강정윤 (부산대학교 재료공학부)
The effects of welding speed were investigated on penetration characteristics, defects and mechanical properties including formability test in Nd:YAG laser welded 1000MPa grade DP steels. A shielding gas was not used and bead-on-plate welding was performed with various welding speeds at 3.5kW laser ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
레이저용접기술의 장점은? | 한편 레이저 용접은 타 용접법에 비해 용접 속도가 빠르고 입열량이 작아 열변형(heating deformation)이 작은 이점을 가지고 있고, 비드 외관이 미려할 뿐만 아니라 정밀성(accuracy), 안정성(stability)이 높다6). 이런 특성으로 인해 레이저용접의 중요성이 확대되고 있으며 일본, 독일, 미국 등 자동차생산기술의 선진국들은 이미 많은 부분에 레이저용접기술을 도입, 응용하고 있다7-8). | |
2상 조직강은 어떻게 구성되어 있는가? | 페라이트와 마르텐사이트로 구성되는 2상 조직강(dual phase steel)은 비교적 적은 합금원소를 가지고도 높은 강도를 확보할 수 있고 유사 강도 수준의 다른 고장력강(advanced high strength steel)에 비해 가공성이 월등히 우수하기 때문에 자동차 등 수송기기분야에서 매우 각광을 받고 있다1-5). | |
2상 조직강이 자동차 등 수송기기분야에서 각광받는 이유는? | 페라이트와 마르텐사이트로 구성되는 2상 조직강(dual phase steel)은 비교적 적은 합금원소를 가지고도 높은 강도를 확보할 수 있고 유사 강도 수준의 다른 고장력강(advanced high strength steel)에 비해 가공성이 월등히 우수하기 때문에 자동차 등 수송기기분야에서 매우 각광을 받고 있다1-5). |
R. A. Kot, J. W. Morris: Structure and Properties of Dual-Phase steel, The Metall. Soc. Of AIME, Warrendale, Pa(1979)
A. T. Davenport: Formable HSLA and Dual-Phase Steels, The Metall. Soc. Of AIME, Warrendale, Pa(1979)
R. A. Kot, B. L. Broamfitt: Fundamentals of Dual-Phase Steels, The Metall Soc. of AIME, Warrendale, Pa(1981)
R. G. Davies: The Deformation Behavior of a Vanadium-Strengthened Dual Phase Steel, Metal. Trans. A, 9A(1978), 41-52
R. G. Davies: Influence of silicon and phosphorous on the mechanical properties of both ferrite and dual-phase steels, Metal. Trans. A, 10A(1979), 113-118
C. M. Banas: The industrial Laser Annual Handbook (Tulsa, Pennwell Publication, 1986)
J. Suh, Y. H. Han: Laser Welding in Automotive Industry, J. KWS, 12(1994), 49-63 (in Korean)
A. Ribolla, G. L. Damoulis, G. F. Batalha: The use of Nd:YAG Laser Weld for Large Scale Volume Assembly of Automotive Body in White, J. Mater. Process. Technol., 164-165 (2005), 1120-1127
T. K. Han, B. K. Lee, C. Y. Kang: Effect of Shield Gas on the Characteristics of $CO_2$ Laser Welded 600MPa Grade High Strength Steel, J. KSLP, 7(2004), 19-26 (in Korean)
T. K. Han, S. J. Kim, B. K. Lee, D. U Kim, C. Y Kang: Characteristics of $CO_2$ or Nd : YAG Laser Welded 600MPa Grade TRIP Steel, J. KWS, 24 (2006), 56-63 (in Korean)
H. Haferkemp, O. Meier, K. Harley: Laser beam Welding of New High Strength Steels for Auto Body Construction, Key. Eng. Mat., 344(2007), 723-730
M. K. Wibowo, I. M. Richardson: The Influence of Laser Beam Welding and Plasma Arc Welding Processes on Dual Phase Steel Microstructure, Adv. Mat. Res., 15-17(2007), 1020-1025
M .S. Xia, Z. Tian, L. Zhao, Y. N. Zhou: Metallurgical and Mechanical Properties of Fusion Zones of TRIP Steels in aser Welding, ISIJ Inter., 48(2008), 483-488
C. Y. Kang, T. K. Han, B. K. Lee, J. K. Kim: Characteristics of Nd:YAG Laser Welded 600MPa Grade TRIP and DP Steels, Mat. Sci. For., 539-543(2007), 3967-3972
T. K. Han, S. S. Park, K. H. Kim, C. Y. Kang, I. S. Woo, J. B. Lee: CO2 Laser Welding Characteristics of 800MPa Class TRIP Steel, ISIJ Inter., 45(2005), 60-65
C. Mapelli, S. Barella, R. Venturini: Characterization of the Relation among the Mechanical Behavior and Texture Features in High Martensitic Dual Phase Steels, ISIJ Inter., 45(2005), 1727-1735
M. S. Xia, E. Biro, Z. L. Tian, Y. N. Zhou: Effects of Heat Input and Martensite on HAZ Softening in Laser Welding of Dual Phase Steels, ISIJ Inter., 48(2008), 809-814
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.