최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국자동차공학회논문집 = Transactions of the Korean Society of Automotive Engineers, v.17 no.5, 2009년, pp.97 - 106
이태우 (국립환경과학원 교통환경연구소) , 길지훈 (국립환경과학원 교통환경연구소) , 박준홍 (국립환경과학원 교통환경연구소) , 엄명도 (국립환경과학원 교통환경연구소) , 김종춘 (국립환경과학원 교통환경연구소) , 이대엽 (인하대학교 기계공학부)
An objective of this study is to give practical information that could be used for calculating pollutant emission factors and fuel economy from Korean Inspection & Maintenance program, which has been using steady state acceleration simulation mode. Concentration results from I/M test is adequately c...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
US EPA, Acceleration Simulation Mode Test Procedures, Emission Standards, Quality Control Requirements, and Equipment Specifications, EPA Report 420-B-03-008, 2004
US EPA, "Inspection and Maintenance (I/M) Program Effectiveness Methodologies," EPA Report 420-S-98-105, 1998
US EPA, "Methodology for Developing Modal Emission Rates for EPA's Multi-scale Motor Vehicle & Equipment Emission System," EPA Report 420-R-02-027, 2002
T. Lee, B. Lee, S. Cho, J. Park, M. Eom, J. Kim and D. Lee, 'On-Road Testing and Calculation of Emission Factor and Fuel Economy,' Transactions of KSAE, Vol.17, No.3, pp.90-101, 2009
H.C. Frey, K. Zhang, N. Rouphail, "Fuel Use and Emissions Comparisons for Alternative Routes, Time of Day, Road Grade, and Vehicles Based on In-Use Measurements," Environ. Sci. Technol. Vol.42, No.7, pp.2483-2489, 2008
R. Rykowski, E. Nam and G. Hoffman, "Onroad Testing and Characterization of Fuel Economy of Light-Duty Vehicles," SAE 2005-01-0677,2005
M. Akard, K. Oestergaard, S. Porter, M. Gautam, D. Carder, D. Love, T. Moye and H. Garabedian, "Further Inversigation into the Performance of Two Different On-Board Emission Measurement System Compared to Laboratory Measurement," SAE 2004-01-3480, 2004
Y. Yamagishi, "The MDLT-1302T Partial Flow Dilution Tunnel for Transient Test Cycle PM Sampling," Horiba Technical Report, 2003
M. Yassine, M. Marji, R. Bermdt and T. Laymac, "Parameters Affecting Direct Vehicle Exhaust Flow Measurement," SAE 2003-01-0781, 2003
S. Yanagihara, O. Mochizuki, K. Sato and K. Saito, "Variable Area Venturi-Type Exhaust Gas Flow Meter," JSAE Review, Vol.20, pp.259-279,1999
K. Kim, M. Kim, D. Park and C. Lee, "A Study on Improvement of an Annular Bar Type D2P Flow Meter for Measuring Exhaust Flow Rate of Diesel Engine," Spring Conference Proceedings, KSAE, pp.489-494, 2007
M. Vojtisek-Lom and J. Allsop, "Development Of Heavy-Duty Diesel Portable, On-Board Mass Exhaust Emissions Monitoring System With NOx, CO2 and Qualitative PM Capabilities," SAE 2001-01-3641,2001
S. Sato, T. Yamamoto and Y. Ogawa, "Research on Measurement Method of Exhaust Gas Flow Rate for On-board Measurement System," SAE 2007-01-4080, 2007
C. Gierczak, T. Korniski, T. Wallington and J. Butler, "Laboratory Evaluation of the SEMTECH- G Portable Emissions Measurement System(PEMS) For Gasoline Fueled Vehicles," SAE 2006-01-1081, 2006
C. Bannister, F. Wallace, J. Hawley and C. Brace, "Predicting Instantaneous Exhaust Flowrates in a Constant Volume Sampling System," Proc. IMechE Vol.221 Part D: J. Automobile Engineering, pp.1585-1589, 2007
H. Nakamura, N. Kihara, M. Adachi, S. Nakamura and K. Ishida, "Development of Hydro Carbon Analyzer Using Heated-NDIR Method and Its Application to On-board Mass Emission Measuremenrt System," JSAE Review, Vol.24, pp.127-133, 2003
W. Miller, T. Durbin, K. Johnson and D. Cocker, "Final Report-Evaluation of Portable Emissions Measurement Systems for Inventory Purposes and the Not-To-Exceed Heavy-Duty Diesel Engine Regulation," California Air Re-sources Board Contract No.03-345, 2006
J. H. Ryu, Y. S. Lyu, S. W. jung, D. W. Kim, Y. G. Son, C. W. Youn, S. J. Jeon and J. C. Kim, "A Study on the Calculation of Pollutant Emission Factors for Vhicle(4))," NIER Report 2006-17-799, 2006
※ AI-Helper는 부적절한 답변을 할 수 있습니다.