최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국주조공학회지 = Journal of Korea Foundry Society, v.31 no.2, 2011년, pp.79 - 82
김정민 (한밭대학교 신소재공학부) , 박준식 (한밭대학교 신소재공학부)
Various grain refining alloying elements such as Sr, TiB, and Ca were added to AZ91D and their effects on the mechanical properties and mold filling ability were investigated. The average grain sizes of those alloys were significantly reduced by the small amounts of the alloying elements. Ca additio...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
마그네슘합금 부품은 주로 무엇에 의해 제조되는가? | 마그네슘합금 부품은 주로 다이캐스팅을 비롯한 주조공정에 의하여 제조되며, 상용합금으로는 주조성, 기계적 성질, 내식성 등이 우수한 Mg-Al계가 주종을 이루고 있다. 일반적으로 주조 합금은 결정립 미세화를 통해 금형충전성을 향상시키고 기계적 성질을 개선하는 경우가 많은데, Mg-Al계 합금의 경우 아직 충분한 실용성을 확보한 결정립 미세화 방법은 없으며 과열에 의한 방법, C2Cl6와 같은 탄소함유 결정립 미세화제의 첨가 등의 효율성이 보고된 바 있다[1-3]. | |
마그네슘합금 부품의 상용합금으로는 무엇이 주종을 이루고 있는가? | 마그네슘합금 부품은 주로 다이캐스팅을 비롯한 주조공정에 의하여 제조되며, 상용합금으로는 주조성, 기계적 성질, 내식성 등이 우수한 Mg-Al계가 주종을 이루고 있다. 일반적으로 주조 합금은 결정립 미세화를 통해 금형충전성을 향상시키고 기계적 성질을 개선하는 경우가 많은데, Mg-Al계 합금의 경우 아직 충분한 실용성을 확보한 결정립 미세화 방법은 없으며 과열에 의한 방법, C2Cl6와 같은 탄소함유 결정립 미세화제의 첨가 등의 효율성이 보고된 바 있다[1-3]. | |
Sr의 미량 첨가를 통한 결정립 미세화 방법의 장점은 무엇인가? | 따라서 Mg-Al계 합금의 효과적인 결정립 미세화 방법에 대한 연구가 지속적으로 이루어져 왔으며[1-8], 최근에는 Sr의 미량 첨가를 통해 결정립 미세화가 효과적으로 이루어지는 것이 보고되었다[5-8]. Sr첨가 미세화 방법은 용탕의 유동성 및 인장성질의 향상에도 효과적인 것으로 확인되었으며, 알루미늄주조합금에서 쓰이는 Al-Sr 모합금을 그대로 적용할 수 있어 실용성 측면에서도 유리할 것으로 기대된다[8]. 한편, 알루미늄합금의 결정립 미세화제로 널리 쓰이는 TiB과 내열성에 효과적인 Ca의 경우에도 결정립 미세화 효과가 있는 것으로 보고된 바 있다[9-11]. |
P. Cao, M. Qian, D. H. StJohn : Scripta Materialia, "Mechanism for grain refinement of magnesium alloys by superheating", 56 (2007) 633-636
Q. Jin, J. P. Eom, S .G. Lim, W. W. Park, B. S. You : Scripta Materialia, "Grain refining mechanism of a carbon addition method in a Mg-Al magnesium alloy", 49 (2003) 1129-1132
Y. Huang, X. Zheng, B. Liu, O. Anopuo, N. Hort, K. U. Kainer, G. S. Kim : Magnesium Technology, "Grain refinement of Mg- Al alloys by carbon inoculation", (2010) 419-424
H. M. Fu, M. X. Zhang, D. Qiu, P. M. Kelly, J. A. Taylor : J. Alloys Compounds, "Grain refinement by AlN particles in Mg-Al based alloys", 478 (2009) 809-812
M. B. Yang, F. S. Pan, R. J. Cheng, A. T. Tang : Trans. Nonferrrous Met. Soc. China, "Effects of Al-10Sr master alloys on grain refinement of AZ31 magnesium alloy", 18 (2008) 52- 58
S. A. Torbati-Sarraf, Y. Radi, R. Mahmudi : Proc. of 8th Int. Conf. on Mg alloys & their applications, "The grain refinement of extruded AZ31 magnesium alloy by Al-Ti-B, Al-Ti-C, Al-Sr, and Mg- $Al_2O_3$ nano-composite master alloy", (2010) 187-199
S. K. Guan, S. J. Zhu, L. G. Wang, Q. Yang, W. B. Cao : Trans. Nonferrous Met. Soc. China, "Microstructures and mechanical properties of double hot-extruded AZ80+xSr wrought alloys", 17 (2007) 1143-1151
J. M. Kim and J. S. Park : J. of Korea Foundry Society, "Effects of grain refinement and melt stirring on the mechanical properties and fluidity of Mg-Al alloys", 30 (2010) 111-114
Y. Wang, X. Zeng, W. Ding : Scripta Mater., "Effect of Al-4Ti- 5B master alloy on the grain refinement of AZ31 magnesium alloy", 54 (2006) 269-273
L. Han, H. Hu, D. O. Northwood : Mater. Letters, "Effect of Ca additions on microstructure and microhardness of an ascast Mg-5.0wt.%Al alloy", 62 (2008) 381-384
J. Du, J. Yang, M. Kuwabara, W. Li, J. Peng : J. of Alloys & Compounds, "Improvement of grain refining efficiency for Mg-Al alloy modified by the combination of carbon and calcium", 470 (2009) 134-140
J. M. Kim, B. K. Park, J. H. Jun, K. T. Kim, W. J. Jung : Mater. Sci. Forum, "Die-casting capabilities of heat resistant Mg-Al- Ca alloys", 486-487 (2005) 424-427
P. Zhao, Q. Wang, C. Zhai, Y. Zhu : Mater. Sci. Eng., "Effects of strontium and titanium on the microstructure, tensile properties and creep behavior of AM50 alloys", 444 (2007) 318-326
J. E. Gruzleski, A. Aliravci : US Patent 5,143,564, "Low porosity, fine grain sized strontium-treated magnesium alloy castings", (1992)
Y. D. Kwon, Z. H. Lee : Mater. Sci. Eng. A, "The effect of grain refining and oxide inclusion on the fluidity of Al-4.5Cu- 0.6Mn and A356 alloys", 360 (2003) 372-376
Q. Han, H. Xu : Scripta Mater., "Fluidity of alloys under high pressure die casting conditions", 53 (2005) 7-10
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.