$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

중공사형 기체분리막 모듈을 이용한 바이오가스의 분리 및 정제
Separation and Purification of Bio Gas by Hollow Fiber Gas Separation Membrane Module 원문보기

멤브레인 = Membrane Journal, v.21 no.2, 2011년, pp.177 - 192  

고형철 (경상대학교 나노신소재공학과 공학연구원) ,  하성용 ((주)에어레인) ,  우승문 (경상대학교 나노신소재공학과 공학연구원) ,  남상용 (경상대학교 나노신소재공학과 공학연구원) ,  이병성 ((주)에어레인) ,  이충섭 ((주)에어레인) ,  최휘문 (아주대학교 환경공학과)

초록
AI-Helper 아이콘AI-Helper

바이오 가스의 분리와 정제를 위해 셀룰로오스 트리아세테이트(CTA) 고분자를 이용하여 중공사형 기체분리막을 상분리법에 의해 제조하고, 제조된 기체분리막을 사용하여 유효 막면적이 0.17 $m^2$인 중공사형 기체분리막 모듈을 제조하였다. 제조된 기체분리막 모듈의 순수 기체투과도틀 메탄, 산소, 이산화탄소에 대하여 측정하였다. 메탄의 투과도는 평균 0.46 GPU를 나타내었으며, 이산화탄소의 투과도는 평균 18.52 GPU였으며 이때 ${\alpha}CO_2$/$CH_4=40.4$를 나타내어 매우 높은 선택도를 나타내었다. 순수 가스 투과 테스트 후 혼합 가스에 대한 분리 정제 테스트를 4가지 모사가스에 대하여 진행하였으며 1 stage, 2 stage, 3 stage로 기체분리막 모듈을 구성하여 stage cut의 변화에 따른 각 부분에서 발생되는 기체의 농도 및 유량을 측정하였다. 1 stage에서는 stage cut이 상승함에 따라 메탄의 농도가 상승하는 것을 알 수 있었으며, 메탄 회수 효율은 떨어지는 것을 알 수 있었다. 2 stage 테스트에서는 1 stage와 유사한 거동을 보이는 것을 알 수 있었으며 메탄의 회수 효율은 1 stage보다 상승하는 것을 알 수 있었다. 바이오 가스 내에 존재하는 메탄의 손실을 줄이기 위해 3 stage 테스트를 진행하였으며, 그 결과 메탄가스의 손실율을 5% 이내로 줄일 수 있는 모듈의 배열을 찾아내었다.

Abstract AI-Helper 아이콘AI-Helper

Hollow fiber membrane using CTA polymers were prepared by the phase separation method for the separation and purification of biogas and the hollow fiber gas separation membrane modules with the effective surface area of 0.17 $m^2$ were prepared. The pure gas permeation properties of membr...

주제어

참고문헌 (23)

  1. A. Car, C. Stropnik, W. Yave, and K. Peinemann, "Pebax/polyethylene glycol blend thin film composite membranes for $CO_2$ Separation : performance with mixed gases", Sep. Purif. Technol., 62, 110-117 (2008). 

  2. V. I. Bondar, B. D. Freeman, and I. Pinnau, "Gas transport properties of poly(ether-b-amide) segmented block copolymers", J. Polym. Sci. Part B: Polym. Phys., 38, 2051 (2000). 

  3. V. I. Bondar, B. D. Freeman, and I. Pinnau, "Gas sorption and characterization of poly(ether-b-amide) segmented block copolymers", J. Polym. Sci. Part B, 37, 2463 (1999). 

  4. S. Basu, A. L. Khan, A. Cano-Odena, C. Liu, and I. F. J. Vankelecom, Chem. Soc. Rev., 39, 750 (2010). 

  5. S. A. Stern, "Polymers for gas separation : the next decade", J. Membr. Sci., 94, 1 (1994). 

  6. L. M. Robeson, "Polymer membranes for gas separation", Curr. Opin. Solid State Mater. Sci., 4, 549 552 (1999). 

  7. S. S. Kapdi, V. K. Vijay, S. K. Rajesh, and R. Prasad, "Biogas scrubbing, compression and storage: perspective and prospectus in Indian context", Renew. Energy, 30, 1195 (2005). 

  8. L. V. A. Truong and N. Abatzoglou, "A H2S reactive adsorption process for the purification of biogas prior to its use as a bioenergy vector", Biommass and Bioenergy, 29, 142 (2005). 

  9. A. A. A. C. Esteves, M. S. S. Lopes, P. M. C Nunes, and J. P. B. Mota, "Adsorption of natural gas and biogas components on active carbon", Sep. Purif. Technol., 62, 281 (2008). 

  10. W. H. Lin and T. S. Chung, "Gas permeability, diffusivity, solubility and aging characteristics of 6FDA-durene polyimide membranes", J. Membr. Sci., 186, 183 (2001). 

  11. R. W. Baker, "Membrane Technology and Applications", McGraw-Hill, New York, 301-392 (2000). 

  12. R. W. Baker, "Future directions of membrane gas separation technology", Ind. Eng. Chem. Res., 1393 (2002). 

  13. H. Lin and B. D. Freeman, "Gas solubility, diffusivity and permeability in poly(ethylene oxide)", J. Membr. Sci., 239, 105 (2004). 

  14. D. L. Ellig, J. B. Althouse, and F. P. McCandless, "Concentration of methane from mixtures with carbon dioxide by permeation through polymeric films", J. Membr. Sci., 6, 259 (1980). 

  15. D. R. Paul and Yu. P. Yampol'skii, "Polymeric Gas Separation Membranes", CRC Press, BocaRaton (1994). 

  16. Y. Osada and T. Nakagawa, "Membrane Science and Technology", Marcel Dekker, NewYork (1992). 

  17. K. Okamoto, M. Fujii, S. Okamyo, H. Suzuki, K. Tanaka, and H. Kita, "Gas Permeation Properties of Poly ether imide segmented copolymer", Macromolecules, 29, 6990 (1995). 

  18. S. W. Yoon, B. S. Lee, B. S. Lee, S. I. Cheong, and J. W. Rhim, "Gas Permeation Properties of Sulfonated 6FDA-based Polyimide Membranes", Membrane Journal, 19, 237 (2009). 

  19. H. C. Koh, S. Y. Ha, and S. Y. Nam, "Preparation and Properties of Hollow Fiber Membrane for Gas Separation Using CTA", Membrane Journal, 21, 98 (2010). 

  20. S. J. Kim, S. M. Woo, H. Y. Hwang, H. C. Koh, S. Y. Ha, H. S. Choi, and S. Y. Nam, "Preparation and Properties of Chlorine-Resistance Loose Reverse Osmosis Hollow-fiber Membrane", Membrane Journal, 20, 304 (2010). 

  21. I. Pinnau and B. D. Freeman, "Formation and modification of polymeric membranes", American chemical society, washington, DC, Membr. Sci., 744, 1 (1999). 

  22. M. Dr. Heinz-Joachim, and F. Elizabeth, "Modified membrane", Australian patent office AU2002214802B2, 0725 (2002). 

  23. J. Phattaranawik, R. Jiraratananon, and A. G. Fane, "Effeet of pore size distribution and air flux on mass transport in direct contact membrane distillation", J. Membr. Sci., 215, 75 (2003). 

저자의 다른 논문 :

LOADING...

관련 콘텐츠

이 논문과 함께 이용한 콘텐츠

저작권 관리 안내
섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로