최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. A. A, v.36 no.6, 2012년, pp.653 - 663
최중선 (한양대학교 기계공학과) , 김재웅 (한양대학교 기계공학과) , 이도형 (한양대학교 기계공학과) , 박경진 (한양대학교 기계공학과)
The study considers the high maneuverability flight and path optimization is conducted to investigate the appropriate generation of the lift and thrust considering the angle of the stroke plane. The path optimization problem is defined according to the various purposes of the high maneuverability fl...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
날갯짓 초소형비행체란 무엇인가? | 날갯짓 초소형비행체(Flapping Wing Micro Air Vehicle)는 날갯짓을 이용하여 비행하며 원격으로 조종되는 소형 무인 비행체이다. 이 비행체는 날갯짓을 통해 추진력과 양력을 동시에 발생시키며 수직 이착륙, 빠른 방향 전환 그리고 협소한 공간에서 정지비행 등이 가능하다. | |
날갯짓 초소형비행체의 가능한 비행 종류는 무엇인가? | 날갯짓 초소형비행체(Flapping Wing Micro Air Vehicle)는 날갯짓을 이용하여 비행하며 원격으로 조종되는 소형 무인 비행체이다. 이 비행체는 날갯짓을 통해 추진력과 양력을 동시에 발생시키며 수직 이착륙, 빠른 방향 전환 그리고 협소한 공간에서 정지비행 등이 가능하다. 또한, 고정익 이나 회전익 비행체에 비해 작은 크기의 비행체 제작이 가능하며 날갯짓 속도나 경로의 제어를 통해 좀 더 자유로운 비행이 가능하다. 날갯짓 초소형 비행체는 새 또는 곤충과 같이 변화하는 상황이나 환경에 따라 능동적으로 대처하기 위해 적절한 공력성능을 낼 수 있어야 한다. | |
초소형 비행체의 날갯짓은 스트로크 평면의 기울기에 따라 어떠한 특징이 있는가? | 수직면이나 수평면에서 날갯짓을 통해 발생하는 양력이나 추진력과 같은 공력성능은 높은 기동성비행을 하기 위해서는 한계점을 가지고 있다. 수직면에서 날갯짓을 하게 되면 높은 양력과 추진력을 발생시키는데 어려움이 있고, 수평면에서의 날갯짓은 다운스트로크와 업스트로크 동안 발생하는 추진력을 상쇄 시켜 정지비행이 가능한 장점을 가지고 있지만 기동성비행에는 적합하지 않다. 따라서 큰 양력과 추진력의 발생을 통해 기동성비행이 가능한 기울어진 스트로크 평면에서의 날갯짓 경로에 대한 연구가 필요하다. |
Dickinson, M. H., Lehmann, F. O. and Sane, S. P., 1999, "Wing Rotation and the Aerodynamic Basis of Insect Flight,"Science, Vol. 284, pp. 1954-1961.
Wang, Z. J., 2004, "The Role of Drag in Insect Hovering," The Journal of Experimental Biology, Vol. 207, pp. 4147-4155.
Lee, J.-S., Kim, J.-H. and Kim, C., 2008, "Numerical study on the Unsteady-Force-Generation Mechanism of Insect Flapping Motion," AIAA Journal, Vol.46, No.7, pp.1529-1537.
Tuncer, H. I. and Kaya, M., 2005, "Optimization of Flapping Airfoils for Maximum Thrust and Propulsive Efficiency," AIAA Journal, Vol. 43, No. 11, pp. 2329-2336.
Kaya, M. and Tuncer, H. I., 2007, "Nonsinusoidal Path Optimization of a Flapping Airfoil," AIAA Journal, Vol. 45, No. 8, pp. 2075-2082.
Choi, J. S., Zhao, L., Park, G. J., Agrawal S. K. and Kolonay, R. M., 2011, "Enhance of a Flapping Wing Using Path and Dynamic Topology Optimization," AIAA Journal, Vol. 49, No. 12, pp. 2616-2626.
ANSYS ICEM CFD, 2009, Reference manual, Ver. 12.1, ANSYS Inc
ANSYS FLUENT, 2009, User's Guide, Ver. 12. 1, ANSYS Inc
PIDOTECH Inc, 2011, PIAnO User's Manual, Ver. 3.3
Fry, S. N., Sayaman, R. and Dickinson, M. H., 2005, "The Aerodynamics of Hovering Flight in Drosophila," The Journal of Experimental Biology, Vol. 208, pp. 2303-2318
Wang, Z. J., 2005, "Dissecting Insect Flight," Fluid Mechanics, Vol. 37, pp. 183-210
Zaitsev, A. A. and Sharina L. V., 1983, "Aerodynamic Calculation of Normal Hovering Flight" Fluid dynamics, Vol. 18, No. 4, pp. 554-560.
de Croon, G.C.H.E., de Clercq, K.M.E., Ruijisink, R., Remes, B. and de Wagter, C., 2009, "Design, Aerodynamics, and Vision Based Control of the DelFly," International Journal of Micro Air Vehicle, Vol. 1, No. 2, pp. 71-97.
Wilkins, P. and Knowles, K., 2007, "Investigation of Aerodynamics Relevant to Flapping Wing Micro Air Vehicle,"37th AIAA Fluid Dynamics Conference and Exhibit.
Wang, Z. J., Birch, J. M. and Dickinson, M. H., 2004, "Unsteady Forces and Flows in Low Reynolds Number Hovering Flight: Two-Dimensional Computations vs Robotic Wing Experiments," Journal of Experimental Biology, Vol. 207, No. 3, pp. 449-460.
Park, G. J., 2007, Analytical Methods in Design Practice, Springer-Verlag, Germany
Lee, K. H., Eom, I. S., Park, G. J. and Park, W. I., 1996, "Robust Design for Unconstrained Optimization Problems Using the Taguchi Method," AIAA Jornal, No. 5, pp. 1059-1063.
Lee, K. H., Hwang, K. H, Kwon, W. S. and Park, G. J., 2000, "Structural Design Considering Interactions in Dicrete Design Spaces," Trans. of the KSME(A), Vol. 1, No. 1, pp. 708-713.
Cho, T. M., Ju, B. H., Jung, D. H. and Lee, B. C., 2006, "Reliability Estimation Using Two-Staged Kriging Metamodel and Genetic Algorithm," Trans. of the KSME(A), Vol. 30, No. 9, pp. 1116-1123.
Lee, T. H., Lee, C. J. and Lee, K. K., 2003, "Shape Optimization of a CRT based on Response Surface and Kriging Metamodels," Trans. of the KSME(A), Vol. 27, No. 3, pp.381-386.
Simpson, T. W., Mauery, T. M., Korte, J. J. and Mistree, F., 2001, "KrigingModels for Global Approximation in Simulation-Based Multidisciplinary Design Optimization," AIAA Journal, Vol. 39, No. 12, pp. 2233-2241.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.