최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국세라믹학회지 = Journal of the Korean Ceramic Society, v.49 no.5, 2012년, pp.454 - 460
한정화 (한라대학교 신소재화학공학과) , 김수종 (한라대학교 신소재화학공학과)
The nano-sized zirconia powders were synthesized in an impregnation method using pulp and
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
지르코니아가 정방정계에서 단사정계로 상이 변할 때 어떤 현상이 발생하는가? | 1-6) 매우 높은 융점(2700oC)을 갖는 지르코니아는 온도변화에 따라 상변이를 하는데, 상온에서는 단사정계로 존재하다가 1170oC에서 치밀한 정방정계로, 2370oC 이상에서는 입방정계로 상이 변한다. 냉각 시 고온상인 정방정계에서 저온상인 단사정계로 상이 변할 때 약 3-5%의 부피팽창을 하는 것으로 알려져 있다. 7) 상온에서 불안정한 고온상의 지르코니아를 안정화하기 위한 방법으로 Y2O3, MgO, CaO 등의 산화물을 첨가하거나 입자크기를 나노단위로 줄이는 연구가 활발히 진행되고 있다. | |
지르코니아가 갖고 있는 우수한 열적 기계적 성질에는 어떠한 것들이 있는가? | 지르코니아는 낮은 열전도도, 높은 강도 및 인성, 높은 전기저항성, 높은 녹는점 등의 우수한 열적 기계적 성질로 산업용 구조 세라믹스뿐만 아니라 촉매, 촉매담체, 고체 연료전지의 전해질 및 PZT, PLZT 등의 전기전자재로의 원료로 광범위하게 사용되고 있다.1-6) 매우 높은 융점(2700oC)을 갖는 지르코니아는 온도변화에 따라 상변이를 하는데, 상온에서는 단사정계로 존재하다가 1170oC에서 치밀한 정방정계로, 2370oC 이상에서는 입방정계로 상이 변한다. | |
고순도의 지르코니아 나노입자를 얻기 위한 제조 방법에는 어떠한 것들이 있는가? | 고순도의 지르코니아 나노입자를 얻기 위한 제조방법으로는 알콕사이드 가수분해법(hydrolysis),8-10) 졸-겔법 (sol-gel),11) 수열합성법 (hydrothermal),12-18) 침전법(coprecipitation),19-28) 마이크로 에멀전법 (microemulsion)29-34) 등과 같은 다양한 액상 합성법들이 사용되고 있다. 그 중에서 금속 알콕사이드를 이용한 가수분해법이나 졸-겔법은 고순도의 구형분말을 비교적 고농도에서 얻을 수 있으나 반응조건이 까다롭고 원료염이 고가여서 실제 응용에 많은 제약이 있는 반면, 제조공정 및 반응조건이 단순해 경제적인 침전법은 생성된 분말들의 응집이 심해 균일한 조성의 분말 제조가 어려운 단점을 갖고 있다. |
S. Shukla and S. Seal, "Mechanisms of Room Temperature Metastable Tetragonal Phase Stabilisation in Zirconia," Int. Mater. Rev., 50 [1] 45-64 (2005).
Nguyen Q. Minh, "Ceramic Fuel Cells," J. Am. Ceram. Soc., 76 [3] 563-88 (1993).
G. K. Chuah, "An Investigation into the Preparation of High Surface Area Zirconia," Catalysis Today, 49 131-39 (1999).
G. K. Chuah, S. Jaenicke, S. A. Cheong, and K. S. Chan, "The Influence of Preparation Conditions on the Surface Area of Zirconia," Appl. Catalysis A, 145 267-84 (1996).
J. D. Kim, S. Hana, S. Kawagoe, K. Sasaki, and T. Hata, "Preparation of Perovskite, Pb(Zr, Ti) $O_3$ Thin-films on YSZ(111)/Si(111) Substrates by Post-deposition Annealing," Thin Solid Films, 385 293-97 (2001).
M. Laurent, U. Schreiner, P. A. Langjahr, A. E. Glazounov, and M. J. Hoffman, "Microstructural and Electrical Characterization of La-doped PZT Ceramics Prepared by a Precursor Route," J. Eur. Ceram. Soc., 21 1495-98 (2001).
B. L. Kirsch, and S. H. Tolbert, "Stabilization of Isolated Hydrous Amorphous and Tetragonal Zirconia Nanoparticles Through the Formation of a Passivating Alumina Shell," Adv. Funct. Mater., 13 [4] 281-88 (2003).
J. Rhee, and D. S. Jo, "Synthesis of Monodispersed Zirconia Powder by Hydrolysis of Zirconium Alkoxides (in Korean)," J. Kor. Ceram. Soc., 28 [2] 167-75 (1991).
B. Fegley, Jr. P. White, and H. K. Bowen, "Processing and Characterization of $ZrO_2$ and Y-Doped $ZrO_2$ Powders," J. Am. Ceram. Soc., 64 [8] 1115-20 (1985).
W. Stober, A. Fink, and E. Bohn "Controlled Growth of Monodisperse Silica Spheres in the Micron Size Range," J. Colloid and Interface Sci., 26 62-69 (1968).
H. Kumazawa, T. Inoue, and E. Sada, "Synthesis of Fine Spherical Zirconia Particles by Controlled Hydrolysis of Zirconium Alkoxide in the High Temperature Range Above 50," Chem. Eng. J., 55 93-96 (1994).
W. Pyda, K. Haberko, and M. M. Bucko, "Hydrothermal Crystallization of Zirconia and Zirconia Solid Solutions," J. Am. Ceram. Soc., 74 [10] 2422-29 (1991).
H. Nishzawa, N. Yamasaki, and K. Matsuoka, "Crystallization and Transformation of Zirconia Under Hydrothermal Conditions," J. Am. Ceram. Soc., 65 [7] 343-46 (1982).
G. Dell'Agli and G. Mascolo, "Hydrothermal Synthesis of $ZrO_2-Y_2O_3$ Solid Solutions at Low Temperature," J. Eur. Ceram. Soc., 20 139-45 (2000).
E. Tani, M. Yoshimura, and S. Somiya, "Hydrothermal Preparation of Ultrafine Monoclinic $ZrO_2$ Powder," J. Am. Ceram. Soc., 64 [12] C-181 (1981).
E. Tani, M. Yoshimura, and S. Somiya, "Formation of Ultrafine Tetragonal $ZrO_2$ Powder Under Hydrothermal Conditions," J. Am. Ceram. Soc., 66 [1] 11-14 (1983).
K. H. Lee, B. H. Le, D. Masaki, A. Kiyosi, W. H. Kang, and H. S. Park., "Hydrothermal Precipitation of PZT Powder (in Korean)," J. Kor. Ceram. Soc., 24 [4] 397-403 (1987).
H. Yoon, M. Y. Shin, and J. J. Ahn, "Properties of Yttria Partially Stabilized Zirconia Nano-Powders Prepared by Coprecipitation Method (in Korean)," J. Miner. Soc. Kor., 19 [2] 81-8 (2006).
J. T. Kim, G. G. Hong, and H. L. Lee, "Properties of the Powders of the System $Al_2O_3-ZrO_2-Y_2O_3$ Prepared by Precipitation Method (in Korean)," J. Kor. Ceram. Soc., 25 [2] 117-24 (1988)
M. Dechamps1, B. Djuricic, and S. Pickering, "Structure of Zirconia Prepared by Homogeneous Precipitation," J. Am. Ceram. Soc., 78 [11] 2873-80 (1995).
K. Matsui, H. Suzuki, and M. Ohagi, "Raman Spectroscopic Studies on the Formation Mechanism of Hydrous-Zirconia Fine Particles," J. Am. Ceram. Soc., 78 [1] 146-52 (1995).
F. Haase, and F. Sauer, "The Surface Structure of Sulfated Zirconia:Periodic ab Initio Study of Sulfuric Acid Adsorbed on $ZrO_2$ (101) and $ZrO_2$ (001)," J. Am. Ceram. Soc., 120 13503-12 (1998).
K. Y. Oh, "Properties of Yittria Stabilized Zirconia-Alumina Powders Prepared by Coprecipitation Method (in Korean)," J. Kor. Ceram. Soc., 34 [11] 1113-20 (1997).
D. G. Bang, J. S. Yoon, and H. S. Lee, "Synthesis and Characteristics for $ZrO_2-Y_2O_3 $ System Powders by Correcipitation Method: . The Properties and Sinterabilities of $ZrO_2-8m/oY_2O_3$ (in Korean)," J. Kor. Ceram. Soc., 26 [2] 242-48 (1989).
J. S. Yoon, D. I. Lee, Y. J. Oh, and H. S. Lee, "A Synthesis and Characteristics for Zirconia Powders by Coprecipitation Method: III. The Properties and Sinterabilities of $ZrO_2-Y_2O_3-Bi_2O_3$ (in Korean.)," J. Kor. Ceram. Soc., 26 [5] 655- 60 (1989).
J. S. Yoon, and H. S. Lee, "A Synthesis and Characteristics for Zirconia Powders by Coprecipitation Method: II. The Properties and Sinterabilites of $ZrO_2-3m/oY_2O_3$ (in Korean)," J. Kor. Ceram. Soc., 27 [4] 532-38 (1989).
G. G. Hong, and H. L. Lee, "Properties of $Al_2O_3-15v/oZrO_2(+3m/o\;Y_2O_3)$ Powder Prepared by Co-Precipitation Method (in Korean)," J. Kor. Ceram. Soc., 26 [2] 210-20 (1989).
N. Chandra, D. K. Singh, M. Sharma, R. K. Upadhyay, S. S. Amritphale, and S. K. Sanghi, "Synthesis and Characterization of Nano-sized Zirconia Powder Synthesized by Single Emulsion-assisted Diredct Precipitation," J. Colloid and Interface Sci., 342 327-32 (2010).
C. Y. Tai, B. Y. Hsiao, and H. Y. Chiu, "Preparation of Silazane Grafted Yttria-stabilized Zirconia Nanocrystals via water/CTAB/hexanol Reverse Microemulsion," Mater. Lett., 61 834-36 (2007).
C. Y. Tai, M. H. Lee, and Y. C. Wu, "Control of Zirconia Particle Size by Using Two-emulsion Precipitation Technique," Chem. Eng. Sci., 56 2389-98 (2001).
C. Y. Tai, and B. Y. Hsiao, "Characterization of Zirconia Powder Synthesized via Reverse Microemulsion Precipitation," Chem. Eng. Commun., 192 1525-40 (2005).
J. Feng, J. Wang, S. C. Ng, C. H. Chew, and L. M. Gan, "Ultrafine Zirconia Powders Via Microemulsion Processing Route," Nanostruct. Mater., 8 [4] 499-505 (1997).
G. R. Duan, X. J. Yang, G. H. Huang, L. D. Lu, and X. Wang, "Water/span80/Triton X-100/n-hexyl Alcohol/noctane Microemulsion System and the Study of Its Application for Preparing Nanosized Zirconia," Mater Lett., 60 1582-87 (2006).
W. J. Park, M. K. Jung, J. W. Moon, T. Masaki, S. J. Im, and D. H. Yoon, "Enhanced Luminescent of Y(P,V) $O_4:Eu^{3+}$ Nano Phosphors in Porous Cellulose Fibers by Facile Liquid Phase Precursor Synthesis," J. Nanosci. Nanotechnol., 9 4371-75 (2009).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
저자가 APC(Article Processing Charge)를 지불한 논문에 한하여 자유로운 이용이 가능한, hybrid 저널에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.