최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국산학기술학회논문지 = Journal of the Korea Academia-Industrial cooperation Society, v.14 no.1, 2013년, pp.1 - 6
Three Surface cracks are among the more common flaws in aircraft and pressure vessel components. Accurate stress intensity analyses and crack growth rate data of surface-cracked components are needed for reliable prediction of their fatigue life and fracture strengths. Three Dimensional finite eleme...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
균열을 갖는 구조물의 파괴강도와 피로수명을 평가를 평가하는데 필요한 요소는? | 3차원 균열은 항공기나 압력용기 계통에서 흔히 발견되는 결함중의 하나이다. 균열을 갖는 구조물에 대한 정확한 응력확대계수 해석과 균열성장속도는 파괴강도와 피로수명을 평가하는데 필요로 한다. 3차원 유한요소법은 구조물에 존재하는 표면균열의 응력확대계수를 구하는데 이용되어 진다. | |
3차원 균열은 주로 어디에서 발견되는 결함인가? | 3차원 균열은 항공기나 압력용기 계통에서 흔히 발견되는 결함중의 하나이다. 균열을 갖는 구조물에 대한 정확한 응력확대계수 해석과 균열성장속도는 파괴강도와 피로수명을 평가하는데 필요로 한다. | |
ASME Boilier and Pressure Vessel Code Section Ⅲ[1]에 준하여 설계된 원자력 발전소가 가질 수 있는 문제점은 무엇인가? | 원자력발전소의 주요기기는 고온 고압의 가동조건하에서 안전성을 유지할 수 있도록 ASME Boilier and Pressure Vessel Code Section Ⅲ[1]에 준하여 설계한다. 이렇게 설계된 원자력발전소 주요기기에는 재질의 불균일성이나 용접과정상의 문제 등의 이유로 미소균열이 존재할 수 있으며 이러한 미소균열 중 일부는 가동 시 계속적인 반복하중을 받음으로써 기기 건전성에 영향을 미칠 수 있는 크기의 균열로 성장할 수도 있다. 가동 중인 원자력발전소에서 이러한 결함이 발견될 경우, ASME Section XI[2]에 준한 결함 안전성 평가를 수행하여 그 안전성이 입증되어야만 계속 가동할 수 있다. |
ASME Boiler and Pressure Vessel Code Section III, "Rules for Construction of Neclear Plant Components," 1995.
ASME Boiler and Pressure Vessel Code Section XI, "Rules for In-Service Inspection of Neuclear Power Plant Components," 1995.
S.L. Kwak, J.S. Lee, Y.J. Kim and Y.W. Park, "Probabilistic Integrity Assessment of Axial Flaw in CANDU Pressure Tube Due to the Diameter and Thickness Variation," Fitness for Service Evaluation and Non-Linear Analysis, Proceedings of the ASME Pressure Vessels and Piping Conference, PVP Vol. 442, pp. 111-118, 2006.
Y.J. Choi, J.S. Lee, Y.J. Yoo, "Fracture Analysis for Ceramic Disk with Semi-Elliptical Crack and Pore", Proceedings of KSPE 2012 Spring Conference, pp. 957-958, 2012.
J.S. Lee, "Automated CAE System for Three-Dimensional Complex Geometry", Doctoral Thesis, The University of Tokyo, 1995.
J.S. Park, "Finite Element Analysis with ANSYS", Info-Tech Corea, 2011.
T. Asano, "Practical Use of Bucketing Techniques in Computational Geometry," Computational Geometry, North-Holland, pp. 153-195, 1995.
Watson, D. F., "Computing the n-Dimensional Delaunay Tessellation with Application to Voronoi Polytopes," The Computer Journal, Vol. 24, pp. 162-172, 1991. DOI: http://dx.doi.org/10.1093/comjnl/24.2.167
J.C. Cavendish, D.A. Field and W.H. Frey., "An approach to Automatic Three-Dimensional Finite Element Mesh Generation," International Journal for Numerical Methods in Engineering, Vol. 21, pp. 329-347, 1985. DOI: http://dx.doi.org/10.1002/nme.1620210210
Shiratori, M., "Analysis of Stress Intensity Factors for Surface Cracks subjected to Arbitrary Distributed Stresses," Bulletin of the Faculty of Engineering, Yokohama National University, Vol. 35, 1996.
Raju, I.S. and Newman, J.C., "Stress Intensity Factors for Internal and External Surface Cracks in Cylindrical Vessel," Journal of Pressure Vessel Technology, Vol. 104, pp. 293-298, 1982. DOI: http://dx.doi.org/10.1115/1.3264220
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.