최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기資源리싸이클링 = Journal of the Korean Institute of Resources Recycling, v.23 no.3, 2014년, pp.44 - 50
박종문 (금오공과대학교 신소재공학과) , 안주영 (금오공과대학교 신소재공학과) , 방대석 (금오공과대학교 에너지.융합소재공학부) , 김봉석 (다성) , 오명훈 (금오공과대학교 신소재공학과)
In this study, a method of shear crushing and a two-stage disk mill were introduced to grind the waste tire powder. Rubber chips with various size were obtained during the crushing or grinding step. The two-stage disk mill was composed of two drum-type blades rotating at various speed and in opposit...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Lee, J. Y., 2007 : Recycling of Waste Rubber, Korean Industrial Chemistry Nesws, 10(3), pp. 42-49
Kim, J. K, 1993 : Waste Tire recycling technique, Gyeongsang National University, pp. 205-211
Kim, J. K., et al., 2003 : A Study on Recycling Technology of Waste Tire Powder by Particle Size Distribution Analysis, Elastomer, 38(2), pp. 128-138.
Kim, J. K., et al., 2003 : A Study on Surface Modification of Waste Rubber Tire(I), J. of Korean Inst. of Resources Recycling, 12(2), pp. 28-35
Cho, H. N and Kim J. K., 1996 : Effect of the Curing Conditions on the Recycling of the Scrap Waste Tire, Journal of the Korea Institute of Rubber Industry, 31(2), pp. 95-103
Hwang, S. H., 2004 : A Study on Utilization of Waste Tire by Fine Powder Processing and Modification of Molecule Structure, Gyeongsang National University, section2, pp. 1-26
Paul. S and Chattopadhyay. A.B., 1995 : Effect of cryogenic cooling by liquid nitrogen jet on forces, temperature and surface residual stresses in grinding steels, Cryogenics, 35(8), pp. 515-523
Adhikari, B and Maiti, D. De, S., 2000 : Reclamation and recycling of waste rubber, Prog. Polym. Sci. 25(7), pp. 909-948
Harrison, K., Tong, S. G and Hilyard, N. C 1986 : An economic evaluation of cryogenic-grinding of scrap automotive tyres, Conservation & Recycling, 9(1), pp. 1-14
Wilczek, M., Bertling, J and Hintemann, D., 2004 : Optimised technologies for cryogenic grinding, International Journal of Mineral Processing, 74, S425-S434
Bilgili, E., Arastoopour, H and Bernstein, B., 2001 : Pulverization of rubber granulates using the solid state shear extrusion process : Part II. Powder characterization, Powder Technology, 115(3), pp. 277-289
Schocke, D., Arastoopour, H and Bernstein, B., 1999 : Pulverization of rubber under high compression and shear, Powder technology, 102(3), pp. 207-214
Tatemichi, Y and Tomizawa, T., 1997 : Development of recycling method by application of fine pulverization, JSAE Review, 18(1), pp. 79-82
Seo, K. H., Lim, J. C and Lim, H. S., 2000 : Effect of Ground Rubber on Mechanical Properties of EPDM Foam, Elastomer, 35(2), pp. 132-137
Han, I. S., Chung, C. B and Kang, S. J., 1999 : Dynamic Optimization of a Tire Curing Process for Product Quality, Elastomer, 34(4), pp. 321-331
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.