최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기照明·電氣設備學會論文誌 = Journal of the Korean Institute of Illuminating and Electrical Installation Engineers, v.29 no.8, 2015년, pp.49 - 54
송태헌 , 조영만 (한양대 일반대학원 전기공학과) , 고광철
Molded Circucit Breaker(MCCB) is a most widely used device to protect loads from the over-current in low power level distribution system. When the MCCB interrupts the over-current, the arc discharge occurred between fixed contact and moving contact to create hot gas. By the Lorentz force due to arc ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
MCCB는 무엇으로 구분되는가? | 저압 배선용차단기(Molded Case Circuit Breaker, MCCB)는 배전계통에서 주로 사용되는 차단기로써, 과전류 또는 단락전류가 부하로 유입되는 것을 막아 부하를 보호하는 기기이다. MCCB는 크게 과전류를 감지하는 트립부와 전극 및 그리드로 구성된 소호부, 그리고 소호부를 작동하기 위한 구동부로 구분된다. MCCB로 트립전류(Trip current) 이상의 과전류가 유입 시, 트립부에서 이를 감지하고 구동부를 조작하여 소호부의 가동전극을 고정전극으로부터 분리시킨다[1]. | |
저압 배선용차단기란 무엇인가? | 저압 배선용차단기(Molded Case Circuit Breaker, MCCB)는 배전계통에서 주로 사용되는 차단기로써, 과전류 또는 단락전류가 부하로 유입되는 것을 막아 부하를 보호하는 기기이다. MCCB는 크게 과전류를 감지하는 트립부와 전극 및 그리드로 구성된 소호부, 그리고 소호부를 작동하기 위한 구동부로 구분된다. | |
MCCB가 과전류를 차단하는 과정에서 발생하는 고온/고압 아크는 어떤 영향을 끼치는가? | 하지만 차단과정에서 발생한 고온/고압 아크는 접점 및 그리드를 손상시키며 소호부 극간의 공기분자들을 전리시키고 가열하여 열가스(Hot-gas)를 생성한다[3]. 일반적으로 전류영점에서 과전류를 차단한 뒤 소호부 극간에서는 절연회복과정을 거쳐 정상상태의 절연내력(Dielectric strength)을 회복한다. |
Jong-Sung Kang, Il-Chul Ahn, Dong-Kyu Shin, Byung-San Baek, Duck-Jung Kim, "Study on Blow Open Force of MCCB", Proceedings of the Korean Institute of Electrical Enginerrs Annual Summer Conference, pp.1137-1138, 2012.
D. J. Griffiths, "Introduction to Electrodynamics", Prentice Hall of India, 1994.
Hauer, Wolfgang, and Xin Zhou. "Re-ignition and Post Arc Current Phenomena in Low Voltage Circuit Breaker." ICEC 2014; The 27th International Conference on Electrical Contacts; Proceedings of. VDE, 2014.
Degui C., Xingwen L., Ruicheng D., "Measyrement of the Dielectric Recovery Strength and Reignition of AC Contactors", IEICE Transactions on Electronics, Vol.E88-C, No.8, pp.1641-1646, 2005.
Shea, J. "Gassing arc chamber wall material effect on post current-zero recovery voltage breakdown." Electrical Contacts, 2002. Proceedings of the Forty-Eighth IEEE Holm Conference on. IEEE, 2002.
Shea, J. "Dielectric recovery characteristics of a high current arcing gap." Electrical Contacts, 2001. Proceedings of the Forty-Seventh IEEE Holm Conference on. IEEE, 2001.
Nagaoka, H. "The inductance coefficients of solenoids." Journal of the College of Science 27.3 (1909): 31.
P. F. Hettwer, "Arc-interruption and gas-evolution characteristics of common polymeric materials" IEEE Transactions on, Power application system, Vol. PAS-101, No. 6, pp.1689-1696, 1982.
Ju-Chul Kim, Jeong-Kyun Lim, Sang-Joong Lee, "A Safety Improvement of Low Voltage Circuit-breakers through Analysis of Instantaneous Trip Characteristics of 30AF Circuit-Breakers", Journal of the Korean Institute of Illuminating and Electrical Installation Engineers, 24(12), 2010.
Young-Kil Chol, Tae-Geun Koo, Kwang-Sik Lee "Development of Contact System in 460V/225A/50kA Molded Case Circuit Breaker", Journal of the Korean Institute of Illuminating and Electrical Installation Engineers, 16(6), 2002.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.