최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. A. A, v.39 no.4, 2015년, pp.423 - 428
김철곤 (삼성전자 글로벌기술센터) , 황지훈 (삼성전자 글로벌기술센터) , 서형준 (삼성전자 생활가전 에어컨전문기술) , 모진용 (삼성전자 생활가전 에어컨전문기술) , 정두한 (삼성전자 생활가전 에어컨전문기술) , 홍석무 (국립공주대학교 금형설계공학과)
To identify locations and causes of interference among parts of an indoor air-conditioning unit, a 3D tolerance analysis was performed and optimized with respect to assembly gaps and the tolerance of each part. The maximum value of the defect rate resulting from the tolerance analysis was found to b...
Choi, Y., Kim, Y., Lee, J. and Kim, K., 2003, "Source Localization of Impact Noise on an Indoor Unit of Air-Conditioner," Proceedings of the Korean Soc. for Noise and Vibration Engineering Autumn Conference, pp. 324-329.
Min, Y. H., Kang, S., Hur, N. and Park, J., 2012, "A Numerical Analysis of Noise Source for Cross-Flow of Air-Conditioner Indoor Unit," Proceedings of the KSME Autumn Conference, pp. 1761-1766.
Lee, D. G., Park, J., Park, K. H., Ha, B., Kim, H. and Park, S. H., 2013, "Investigation of Mechanism of Frictional Impulse Noise in Closed Cabinet," Trans. Korean Soc. Mech. Eng. A, Vol. 37, No. 2, pp. 249-255.
Moon, Y., Jeon, Y. and Mun, H., 2008, "Study on Tolerance of Injection Mold and the Quality for Plastic Lens Using Tolerance Analysis," Proceedings of the KSTP Mold Symposium, pp. 327-342.
Lee, I., Jang, H. and Lee, S., 2010, "Deformation Analysis by Interference Fit for Inner Ring of Automotive Wheel Bearing Pack-Seal," Proceedings of the KSAE Autumn Conference, pp. 1336-1338.
Eom, S. M., Choi, D. H. and Yoo, H. H., 2006, "Statistical Tolerance Analysis and Optimization of a Governor Mechanism Employing Multi-body Dynamics Approach and Response Surface Method," Proceedings of the KSME Spring Conference, pp. 3031-3036.
Kim, S. K., Park, P. H. and Kim, S. S., 2011, "Accumulated Tolerances Analysis of Suspension Based on Multi-body Elasto-Kinematic Analysis," Proceedings of the KSAE Autumn Conference, pp. 696-702.
Variation Analysis(VA) Manual-MT9008, Version 10.1, Siemens PLM software, Munich, pp. 1-135.
ABAQUS User's Manual, Version 6.10, Dassault Systemes Simulia Corp., USA.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.