최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기펄프 종이기술 = Journal of Korea TAPPI, v.47 no.2, 2015년, pp.61 - 69
용성문 (강원대학교 산림환경과학대학 제지공학과) , 곽건호 (강원대학교 산림환경과학대학 제지공학과) , 조병욱 (강원대학교 산림환경과학대학 제지공학과) , 이용규 (강원대학교 산림환경과학대학 제지공학과) , 원종명 (강원대학교 산림환경과학대학 제지공학과)
A number of researches have been carried out regarding the utilization of nanocellulose(crystalline nanocellulose, microfibrillated cellulose, nanofibrillated cellulose) for the manufacture of various kinds of composites and functional products. However, only few research works on the manufacturing ...
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
MFC 제조에 있어서의 가장 큰 문제점은 무엇인가? | 비록 MFC를 이용한 다양한 소재 및 제품들의 제조를 위한 실험실적 또는 파일롯 규모에서 상당한 진전을 보이기는 했지만 산업화 및 상용화하는데는 아직 몇몇 장벽이 남아있다. 그 중 가장 큰 문제는 에너지 소비가 많고, 생산 비용이 높다는 것이다. 물론 많은 연구자들이 화학적 또는 효소 전처리를 시도함으로써 에너지 소비를 상당히 줄일 수 있는 가능성을 보여주기도 했지만 아직 실용화단계에는 이르지 못했다. | |
나노셀룰로오스란 무엇인가? | 나노셀룰로오스는 직경이 10-100 nm 범위에 포함되는 피브릴 상태의 것을 지칭한다. 화학적으로 나노셀룰로오스를 추출하는 NCC (Nanocrystalline cellulose) 또는 CNC (Crystalline Nanocellulose)로 불리는 나노크리스탈 셀룰로오스를 제외한 다른 나노셀룰로오스들은 기계적으로 제조를 하다 보니 NCC에 비하여 균일한 크기의 나노셀룰로오스를 얻기가 어렵다. | |
나노셀룰로오스는 어떠한 특징을 가지는가? | 나노셀룰로오스는 자연에서 쉽게 확보할 수 있고 풍부한 천연 소재이며, 재생산이 가능하고, 생분해성과 생체 호환성을 지니고 있다. 또한 나노셀룰로오스는 강도 및 탄성계수가 높고, 높은 장폭비와 표면적을 지니며, 화학적인 기능성 및 가공성을 지니는 등 석유화학 제품 및 다른 천연소재가 지니지 못하고 있는 장점을 지니고 있기 때문에 그 잠재성이 매우 높다. |
Esau, K., Anatomy of seed plants, Wiley and Sons, Chichester(1977).
Turbak, A.F., Snyder, F.W. and Sandberg, K.R., Microfibrillated cellulose, a new cellulose product : Properties, uses and commercial potential, Proceedings of 9th Cellulose Conference, J. Appl. Polym. Sci. : Applied Polymer Symposia 37:815-827(1983).
Herrick, F.W., Casebier, R.L., Hamilton, J.K. and Sandberg, K.R., Microfibrillated cellulose: morphology and accessibility, J. Appl. Polym. Sci.: Appllied Polymer Symposia 37:797-813 (1983).
Saito, T. and Isogai, A., Ion-exchange behavior of carboxylate groups in fibrous cellulose oxidized by the TEMPO-mediated system, Carbohydrate Polymer 61:183-190(2005).
Saito, T. and Isogai, A., Introduction of aldehyde groups on surfaces of native cellulose fibers by TEMPO-mediated oxidation, Colloids Surface A - Physicochem. Eng. Asp. 289:219-225(2006).
Saito, T. and Isogai, A., Wet strength improvement of TEMPO-oxidized cellulose sheets prepared with cationic polymers, Ind. Eng. Chem. Res. 46:773-780 (2007).
Saito, T., Hirota, M., Tamura, N., Kimura, S., Fukuzumi, H., Heux, L. and Isogai, A., Individualization of nanosized plant cellulose fibrils by direct surface carboxylation using TEMPO catalyst under neutral conditions, Biomacromolecules 10:1992-1996(2009).
Saito, T., Kimura, S., Nishiyama, Y. and Isogai, A., Cellulose nanofibers prepared by TEMPO-mediated oxidation of native cellulose, Biomacromolecules 8:2485-2491(2007).
Saito, T., Nishiyama, Y., Putaux, J.L., Vignon, M. and Isogai, A., Homogeneous suspensions of individualized microfibrils from TEMPO-catalyzed oxidation of native cellulose, Biomacromolecules 7:1687-1691(2006).
Saito, T., Yanagisawa, M. and Isogai, A., TEMPOmediated oxidation of native cellulose: SEC-MALLS analysis of water-soluble and -insoluble fractions in the oxidized products, Cellulose 12:305-315(2005).
Henriksson, M., Henriksson, G., Berglund, L.A. and Lindstrom, T., An environmentally friendly method for enzyme-assisted preparation of microfibrillated cellulose nanofibers, European Polymer Journal 43:3434-3441(2007).
Spence, K.L., Venditti, R.A., Habibi, Y., Rojas, O.J. and Pawlak, J.J., Aspects of raw materials and processing conditions on the production and utilization of microfibrillated cellulose, International Conference on Nanotechnology for the Forest Products Industry (2010).
Spence, K.L., Venditti, R.A., Rojas, O.J., Habibi, Y. and Pawlak, J.J., A comparative study of energy consumption and physical properties of microfibrillated cellulose produced by different processing methods, Cellulose 18:1097-1111(2011).
Meyer, V., Tapin-Lingua, S., Perez, D.D.S, Arndt, T. and Germgard, U., Influence of mechanico-enzymatic and chemical pre-treatment methods on NFC preparation, SUNPAP Workshop(2011).
Paakko, M., Ankerfors, M., Kosonen, H., Nykanen, A., Ahola, S., Osterberg, M., Ruokolainen, J., Laine, J., Larsson, P.T., Ikkala, O. and Lindstrom, T., Enzymatic hysrolysis combined with mechanical shearing and high-pressure homogenization for nanoscale cellulose fibrils and strong gels, Biomacrocules 8:1934-1941(2007).
Ryu, J., Youn, H.J., S대, D.J., Yang, J.Y. and Ryu, J.-B., Production of nanofibrillated cellulose using grinder and its characterization, Proceedings of Spring Conference of the KTAPPI, pp. 201-205 (2011).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.