최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기資源리싸이클링 = Journal of the Korean Institute of Resources Recycling, v.24 no.2, 2015년, pp.55 - 61
박종문 (금오공과대학교 신소재공학부) , 안주영 (금오공과대학교 신소재공학부) , 박진의 (금오공과대학교 신소재공학부) , 방대석 (금오공과대학교 에너지융합소재공학부) , 김봉석 ((주)씽크루트) , 오명훈 (금오공과대학교 신소재공학부)
In this study, mechanical properties of waste ground rubber tire powder were investigated to evaluate the influence of pre-treatment process for recycling. The tensile test, fracture test and morphology observation were carried out using various kinds of waste ground tire powders, which were produce...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
폐타이어의 재활용 방법 중 분말가공 방법은 무엇인가? | 원형을 이용하는 방법은 재생타이어 이용, 어초용, 토목공사용에 이용하는 방법으로 타이어의 원형을 그대로 이용하는 방법이다. 마지막으로, 분말가공 방법은 폐타이어를 분쇄하여 분말형태로 제조한 후 이를 필요에 따라 활용하는 방법으로 분말제조 공정에서 다양하게 확보된 분말크기에 따라 각종 고무제품, 건축자재 생산, 고무아스팔트 제조 등에 이용하는 방법으로 열원으로 이용하는 방법 다음으로 17% 정도(대한타이어공업협회 2012년도 기준)로 활용도가 높은 분야이다. 하지만, 이에 대한 연구가 다소 부족한 실정이다. | |
고무분말을 제조하는 기술은 어떻게 나뉘는가? | 폐타이어를 분쇄하여 다양한 크기의 고무분말 형태로 가공하면 그 크기가 작아질수록 표면적이 증가하게 되어 이종 및 동종 물질간의 결합이 용이하게 됨에 따라 다양한 분야에 적용할 수 있게 된다. 즉, 고무분말을 제조하는 기술은 분쇄공정 개선을 통하여 더욱 작은 입자 크기의 고무분말을 제조하기 위하여 다양한 방법들이 연구되고 있으며, 크게 상온분쇄법과 냉각분쇄법으로 나뉜다. 두 방법 모두 분쇄 칼날을 이용하여 폐타이어를 고무분말로 만드는 것은 동일하나 냉각분쇄법의 경우 액체질소를 사용하여 폐타이어를 유리전이 온도 이하에서 분쇄하는 방법으로 상온분쇄법에 비하여 입자크기를 작게 제조하기에 유리하다. | |
상온분쇄법과 냉각분쇄법의 공통점은 무엇인가? | 즉, 고무분말을 제조하는 기술은 분쇄공정 개선을 통하여 더욱 작은 입자 크기의 고무분말을 제조하기 위하여 다양한 방법들이 연구되고 있으며, 크게 상온분쇄법과 냉각분쇄법으로 나뉜다. 두 방법 모두 분쇄 칼날을 이용하여 폐타이어를 고무분말로 만드는 것은 동일하나 냉각분쇄법의 경우 액체질소를 사용하여 폐타이어를 유리전이 온도 이하에서 분쇄하는 방법으로 상온분쇄법에 비하여 입자크기를 작게 제조하기에 유리하다. 하지만 냉각분쇄법은 사용 되는 액체질소 때문에 생산되는 고무분말의 가격이 높아지고 물성 저하의 요인이 되기 때문에 분말로 제품화 하는데 큰 장애요소로 작용하므로 대부분 상온분쇄법을 채택하고 있다. |
Adhikari, B and Maiti, D. De, S., 2000 : Reclamation and recycling of waste rubber, Prog. Polym. Sci. 25(7), pp. 909-948.
Rorres, A., Chomon, M. J. and Caballero, B., 2001 : Pyrolysis of scrap tyres. Fuel Process. Technol, 72, pp. 9-22.
Jang, J. W., Yoo, T. S., Oh, J. H. and Iwasaki, I., 1998 : Discarded tire recycling practices in United States, Japn and Korea resoures. Conserv. Recycl, 22, pp. 1-14.
한국자원재생공사 1998 : 폐타이어 재생처리시설현황
Lee, J. Y., 2007 : Recycling of Waste Rubber, Korean Industrial Chemistry Nesws, 10(3), pp. 42-49.
Kim, J. K., 1993 : Waste Tire recycling technique, Gyeongsang National University, pp. 205-211.
Kim, J. K., et al., 2003 : A Study on Recycling Technology of Waste Tire Powder by Particle Size Distribution Analysis, Elastomer, 38(2), pp. 128-138.
Kim, J. K., et al., 2003 : A Study on Surface Modification of Waste Rubber Tire(I), J. of Korean Inst. of Resources Recycling, 12(2), pp. 28-35.
Cho, H. N and Kim J. K., 1996 : Effect of the Curing Conditions on the Recycling of the Scrap Waste Tire, Journal of the Korea Institute of Rubber Industry, 31(2), pp. 95-103.
Hwang, S. H., 2004 : A Study on Utilization of Waste Tire by Fine Powder Processing and Modification of Molecule Structure, Gyeongsang National University, section2, pp. 1-26.
Paul. S and Chattopadhyay. A.B., 1995 : Effect of cryogenic cooling by liquid nitrogen jet on forces, temperature and surface residual stresses in grinding steels, Cryogenics, 35(8), pp. 515-523.
Harrison, K., Tong, S. G and Hilyard, N. C 1986 : An economic evaluation of cryogenic-grinding of scrap automotive tyres, Conservation & Recycling, 9(1), pp. 1-14.
Wilczek, M., Bertling, J and Hintemann, D., 2004 : Optimised technologies for cryogenic grinding, International Journal of Mineral Processing, 74, S425-S434.
De-Link Bulletin 1. 1995 : De-Link recycling system, all you want to know. Kuala Lumpur, STI-K Polymers Sdn. pp. 69-92.
Schocke, D., Arastoopour, H and Bernstein, B., 1999 : Pulverization of rubber under high compression and shear, Powder technology, 102(3), pp. 207-214.
Bauman, B. D, 1974 : Surface-modified rubber particles in PU. Rubber Plast. News 23, pp. 56-58.
Seo, K. H., Lim, J. C and Lim, H. S., 2000 : Effect of Ground Rubber on Mechanical Properties of EPDM Foam, Elastomer, 35(2), pp. 132-137.
Park, J. W., Roh, H. S., Kim, J. K. and Joe, Y. I., 1997 : Studies on Microbial Treatment for Recycling of Waste Tire, Journal of the Korea Institute of Rubber Industry, 32(5), pp. 325-329.
Levin, V. T., Kim, S. H. and Isayev, A. I., 1997 : Effect of crosslink type on the ultrasound devulcanization of SBR vulcanizates, Rubber Chemical Technology, 70, pp. 641-649.
An, J. Y., Park, J. M., Bang, D. S., Kim, B. S and Oh, M. H., 2014 : Characteristics of Thermo-Plastic Vulcanized (TPV) Composite Prepared by the Waste Tire and Plastic Powder, J. of Korean Inst. of Resources Recycling, 23(4), pp. 30-36.
Park, C H., 2009 : Devulcanization Method for Wasted Tire, 10-0926346-0000(KR)
Kim, B. S., 2015 : private communication with Thinker route Co. Ltd.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.