$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

반복측정자료 분석을 위한 혼합모형의 적용성 검토: 강원지역 굴참나무 임분을 대상으로
Applicability Evaluation of a Mixed Model for the Analysis of Repeated Inventory Data : A Case Study on Quercus variabilis Stands in Gangwon Region 원문보기

韓國林學會誌 = Journal of Korean Forest Society, v.104 no.1, 2015년, pp.111 - 116  

표정기 (국립산림과학원 산림생산기술연구소) ,  이상태 (국립산림과학원 산림생산기술연구소) ,  서경원 (국립산림과학원 산림생산기술연구소) ,  이경재 (국립산림과학원 산림생산기술연구소)

초록
AI-Helper 아이콘AI-Helper

본 연구의 목적은 임의효과(random effect)를 포함하는 혼합모형(mixed model)을 이용하여 흉고직경과 수고의 변화량을 평가하는데 있다. 강원도 굴참나무 임분을 대상으로 흉고직경과 수고를 조사하고 3년 후 동일 임분을 재조사하였다. 혼합모형에서 굴참나무의 흉고직경-수고 관계는 고정효과(fixed effect)이고 초기측정과 반복측정의 흉고직경과 수고 차이를 임의효과로 설정하였다. 임의효과에 따른 모형의 적합도를 검정하기 위하여 아카이케의 정보기준(akaike information criterion, AIC)을 참고하고 반복 측정에 따른 분산-공분산 행렬과 오차항을 산정하였다. 추정된 공분산은 -0.0291이고 오차항은 0.1007을 나타내었다. 분산-공분산 행렬을 이용한 임의효과가 포함된 모형의 AIC(=-215.5)는 고정효과를 고려한 모형의 AIC(=-154.4)에 비해 낮은 수치를 나타내었다. 이러한 결과는 범주형 자료의 임의효과가 모형 개발에 반영되는 결과인 것으로 조사되었다. 그러므로, 본 연구에서 적용된 혼합모형은 반복 측정 자료를 이용한 모형 개발에 활용이 가능한 것으로 판단된다.

Abstract AI-Helper 아이콘AI-Helper

The purpose of this study was to evaluate mixed model of dbh-height relation containing random effect. Data were obtained from a survey site for Quercus variabilis in Gangwon region and remeasured the same site after three years. The mixed model were used to fixed effect in the dbh-height relation f...

주제어

AI 본문요약
AI-Helper 아이콘 AI-Helper

* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.

문제 정의

  • 기존의 연구는 주로 지역간 차이를 고려하여 혼합모형의 적용성을 검토하였고 최근 다양한 시점에서 수집된 자료의 차이를 고려하는 모형의 개발이 필요한 실정이다. 그러므로, 본 연구의 목적은 초기측정과 반복측정에 따른 흉고 직경과 수고의 변화량을 파악하고 분산-공분산행렬을 제시하여 혼합모형을 이용한 정도 높은 흉고직경-수고 모형 개발에 있다.
  • 본 연구는 우리나라의 대표적인 참나무류인 굴참나무를 대상으로 반복측정에 따른 흉고직경과 수고의 모형식을 개발하고 생장량을 비교하였다. 조사대상지는 강원도 내 3개 양양, 홍천, 횡성지역이고 조사 시기는 2010년, 2013년 동일시험지를 대상으로 조사하였다.
본문요약 정보가 도움이 되었나요?

질의응답

핵심어 질문 논문에서 추출한 답변
고정효과는 무엇인가? , 2009). 고정효과는 특정 수준의 모집단을 대상으로 설명하고자 하는 요인(factor)이고 임의효과는 연구 대상이 모집단으로부터 일정한 확률로 선정된 표본임을 가정하는 효과를 나타낸다(Searle, 1982; Mcculloh et al., 2008).
모형의 개발연구에는 어떤 사료를 사용하는가? 모형의 개발연구는 대상이 되는 모집단 특성을 파악하기 위해 다양한 시점에서 수집된 연속적인 자료(continuous data)가 사용된다. 그러나 수집된 자료는 특정 범주 (category)에 따라 특성이 존재하고 특정 시점에서 자료가 편중되는 경우, 자료의 가중치가 전체적인 모형의 왜곡을 나타내는 경우가 발생한다(Searle, 1982).
모형 개발과정에 발생하는 문제점을 해결하기 위해 범주간 특성을 파악하고 분산-공분산 행렬을 작성하여 모형에 적용해야하는 이유는? 모형의 개발연구는 대상이 되는 모집단 특성을 파악하기 위해 다양한 시점에서 수집된 연속적인 자료(continuous data)가 사용된다. 그러나 수집된 자료는 특정 범주 (category)에 따라 특성이 존재하고 특정 시점에서 자료가 편중되는 경우, 자료의 가중치가 전체적인 모형의 왜곡을 나타내는 경우가 발생한다(Searle, 1982). 그러므로 범주간 특성을 파악하고 분산-공분산 행렬(variance-covariance matrix)을 작성하여 모형에 적용함으로써 모형 개발과정에 발생하는 문제점을 해결해야 한다(Lappi and Bailey, 1988; Lappi, 1997; Trincado et al.
질의응답 정보가 도움이 되었나요?

참고문헌 (20)

  1. Adame, P., Rio, M.D., and Canellas, I. 2008. A mixed nonlinear height-diameter model for pyrenean oak (Quercus pyrenaica Willd.). Forest Ecology and Management 256: 88-98. 

  2. Budhathoki, C.B., Lynch, T.B., and Guldin, J.M. 2008. A Mixed-effects model for the dbh-height relationship of shortleaf pine (Pinus echinata Mill.). Southern Journal of Applied Forestry 32(1): 5-11. 

  3. Kim, H. 1999. Review of repeated measures data analysis and PROC MIXED. Journal of the Korean Society of Health Statistics 24(1): 7-15. 

  4. Korea Forest Service. 2012. Volume.biomass and stand yield table. Korea Forest Service. pp 181. 

  5. Lappi, J. 1997. A longitudinal analysis of height/diameter curves. Forest Science 43(4): 555-570. 

  6. Lappi, J. and Bailey, R.L. 1988. A height prediction model with random stand and tree parameter: An alternative to traditional site index methods. Forest Science 34(4): 907-927. 

  7. Lee, Y.J., Coble, D.W., Pyo, J.K., Kim, S.H., Lee, W.K., and Choi, J.K. 2009. A Mixed-effects height-diameter model for pinus thunbergii trees in Gangwon province, Korea. Journal of Korean Forest Society 98(2): 178-182. 

  8. Liang, J. and Picard, N. 2013. Matrix model of forest dynamics: An overview and outlook. Forest Science 59(3): 359-378. 

  9. Liu, X.Q., Rong, J.Y., and Liu, X.Y. 2008. Best linear unbiased prediction for linear combinations in general mixed linear models. Journal of Multivariate Analysis 99: 1503-1517. 

  10. Lynch, T.B., Holly, A.G., and Stevenson, D.J. 2005. A random-parameter height-dbh model for Cherrybark oak. Southern Journal of Applied Forestry 29(1): 22-26. 

  11. Mcculloch, C.E., Searle, S.R., and Neuhaus, J.M. 2008. Generalized, Linear, and Mixed Models. John Wiley and Sons, Incorporation. pp 7-10. 

  12. Robinson, G.K. 1991. That BLUP is a good thing: The estimation of random effects. Statistical Science 6(1): 15-51. 

  13. SAS Institute, Incorporation. 2004. SAS/STAT 9.1 User's Guide. SAS Institute, Incorporation. Cary. North Carolina. 

  14. Searle, S.R. 1982. Matrix algebra useful for statistics. John Wiley and Sons, Incorporation. pp. 200-201. 

  15. Sharma, M. and Parton, J. 2007. Height-diameter equations for boreal tree species in Ontario using a mixed-effects modeling approach. Forest Ecology and Management 249: 187-198. 

  16. Trincado, G. and Burkhart, H.E. 2006. A generalized approach for modeling and localizing stem profile curves. Forest Science 52: 670-682. 

  17. Trincado, G., Vanderschaaf, C.L. and Burkhart, H.E. 2007. Regional mixed-effects height-diameter models for loblolly pine (Pinus taeda L.) plantations. European Journal of Forest Research 126: 253-262. 

  18. Vanderschaaf, C. 2008. Stand level height-diameter mixed effects models: parameters fitted using Loblolly pine but calibrated for sweetgum. Proceeding of the 16th Central Hardwoods Forest Conference. pp. 386-393. 

  19. Vargas-larreta, B., Castedo-dorado, F., Alvarez-gonzalez, J.G., Barrio-anta, M. and Cruz-cobos, F. 2009. A generalized height-diameter model with random coefficients for unevenaged stands in El Salto, Durango(Mexico). Forestry 82(4): 445-462. 

  20. Zhang, Y. and Borders, B.E. 2004. Using a system mixed-effects modeling method to estimates tree compartment biomass for intensively managed loblolly pines-an allometric approach. Forest Ecology and Management 194: 145-157. 

저자의 다른 논문 :

LOADING...

관련 콘텐츠

오픈액세스(OA) 유형

FREE

Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문

이 논문과 함께 이용한 콘텐츠

저작권 관리 안내
섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로