최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기반도체디스플레이기술학회지 = Journal of the semiconductor & display technology, v.15 no.2, 2016년, pp.81 - 86
Moisture vapor transmission rate (MVTR) is an important item for many applications of polymer breathable thin film. To determine the optimum values of the process parameters, it is essential to find their influence on The significance of six important process parameters namely, extruder cylinder tem...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
통기성 필름이란? | 통기성 필름(breathable film)은 기체 또는 수증기 등은 투과할 수 있지만 액체는 투과할 수 없는 플라스틱 필름을 말하며 필름 전체에 미세한 기공이 다수 존재하는 다공성 재질로 이루어져 있다[1-2]. 이 필름은 공기 통풍성과 강성, 내열성, 특히 필름의 두께 균일성 등이 요구되며, 공기의 통풍성을 유지하기 위해 폴리에틸렌에 다량의 무기물(CaCO3)을 혼합하여 T-다이(die) 형 압출기를 통해 20 ~ 30 μm의 필름을 제조하고 있다. | |
투습도에 영향을 주는 인자의 특징은? | 고분자필름의 투습도는 연신율을 증가시킬 때 감소하는 것으로 알려져 있고, 재질이 균일(homo -geneous)한 필름을 습기가 투과할 때 투습도는 확산과 용해도의곱으로 나타낼 수 있다[3-4]. 또한 투습도에 영향을 미치는 인자는 필름의 밀도, 결정도, 고분자의 배열, 가교도 및 첨가제 등의 증가에 따라 투습도는 감소하며 고분자의 증가와는 무관한 것으로 알려져 있다. 투습도에 관한 이러한 연구방법은 고분자 용융체(melt)의 특성을 규명해야 하므로 그 분석이 매우 까다롭고 번잡하다[5-7]. | |
통기성 필름 제조방법은? | 통기성 필름(breathable film)은 기체 또는 수증기 등은 투과할 수 있지만 액체는 투과할 수 없는 플라스틱 필름을 말하며 필름 전체에 미세한 기공이 다수 존재하는 다공성 재질로 이루어져 있다[1-2]. 이 필름은 공기 통풍성과 강성, 내열성, 특히 필름의 두께 균일성 등이 요구되며, 공기의 통풍성을 유지하기 위해 폴리에틸렌에 다량의 무기물(CaCO3)을 혼합하여 T-다이(die) 형 압출기를 통해 20 ~ 30 μm의 필름을 제조하고 있다. 이 때 균일한 두께 유지와 강성이 필수적이므로 고속에서의 고분자의 용융 유동이 일정하게 유지되어야 하는 어려움이 있다. |
Bernardo, L. Hes, C. A., Queiros, M. A., "A New Method for the Determination of Water Vapor Permeability of Polymer Films Based on the Evaluation of the Heat of Evaporation," Polymer. Testing Vol. 15, pp. 189-201, 1996.
Basset, D., Germain , Y., Glotin , M., Leibler , L., "Measurement of Water Permeability of Breathable Films," Institute of Materials, London, pp. 23-24, 1994.
Alexander Stroeks," Modelling the Moisture Vapour Transmission Rate through Segmented Block Co-Poly(ether-ester) Based Breathable Films, " Journal of Polymer, Vol. 42, pp. 117-127, 2001.
Alexander Stroeks, Krijn Dijkstra,"The Moisture Vapour Transmission Rate of Block Co-Poly(ether-ester) Based Breathable Films, 2.Influence of the Thickness of the Air Layer Adjacent to the Film," Journal of Polymer, Vol. 42, pp. 9903-9908, 2001.
Takahashi ,Y., Kitade , S., Kurashima , N., and Noda, I., "Viscoelastic Properties of Immiscible Polymer Blends under Steady and Transient Shear Flows," Polymer. Journal. Vol. 26, pp.1206-1212, 1994.
Rao , I. J., and Rajagopal , K. R., "A Study of Strain Induced Crystallization of Polymers," Int. Journal. Solids Structures Vol. 38, pp. 1149-1167, 2001.
Alaie, S. M., and Papanastasiou , T. C., "Film Casting of Viscoelastic Liquid," Polym. Eng. Sci. Vol. 31(2), pp.67-75. 1991.
Muller, A. J., Balsamo, V., F. Da Silva, Rosales, C. M., and Saez, A. E., "Shear and Elongational Behaviour of Linear Low-Density and Low-Density Polyethy -lene Blends from Capillary Rheometry." Polymer. Eng. Sci. Vol. 34, pp. 1455-1463. 1994.
Verbeek , C.J.R., "Effect of Preparation Variables on the Mechanical Properties of Compression-Moulded Phlogopite/LLDPE Composites." Materials Letters Vol. 56, pp. 226-231, 2002.
Lee S. H., "Optimization of cutting parameters for burr minimization in face-milling operations", Int. J. Prod. Res. Vol. 41, No. 3, pp. 497-511, 2003.
Lin T. R., "Optimization technique for face milling stainless steel with multiple performance characteristics", Int. J. Adv. Manuf. Technol. Vol. No. 19, pp. 330-335, 2002.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.