최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기패션비즈니스 = Fashion business, v.20 no.4, 2016년, pp.153 - 171
With the advent of smart clothing for health care and sports, the sophisticated designs with curved seams are drawing attention. One of the problems in those clothing is to determine the design curves in 2D pattern, such that it corresponds to the lines on the intended 3D body. Moreover, the difficu...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
레이딩 방식의 두 가지 방법은? | 일반적으로 패턴사이즈를 증가시킬 때에는 기본형 2 . 차원 패턴을 그레이딩하는 경우가 대부분이다 그 레이딩 방식에는 크게 절개방식과 점 이동방식 두 가지가 있는데 점 이동방 (Shoben & Taylor, 2004), 식은 외곽 점에서 이동을 하기 때문에 내부형태 변 화를 충분히 반영하지 못한다 반면 절개방식의 경 . , 우 패턴 내부에 절개선을 넣고 원하는 부위에 절개 값을 다르게 주어 패턴 크기를 조절할 수 있기 때문 에 점이동방식보다 신체적합성이 더 우수 할 뿐 아 니라 사이즈별로 자동전개 되므로 높은 정확성과 , 효율성을 갖는다고 하였다 많은 산업 (Jang, 2000). | |
선정된 디자인 라인의 무릎부분은 어떻게 만들었는가? | Selection and Drawing of Pants Design Lines from the Previous Research Figure 8. Development of Pants Pattern using Combination Methods Considering Movement 무릎부분은 동작 편이성을 주기 위하여 앞중심선 을 기준으로 위쪽과 아래쪽으로 각각 여유분을 1 ㎝ 주었으며 무릎 아래 부분은 착용 시 (Figure 8 ), ② 여유가 있고 외관을 고려하여 직선으로 떨어지게 하 여 곡선 절개형이 들어간 차원 기본 (Figure 8 ) 3 ③ 바지 패턴 을 설계하였다 (73-94) . 이희란 / 곡선 절개형 바지의 패턴사이즈 변형방법과 가상착의곡면 3D 161 | |
밀착형 컴프레션웨어가 마켓에서 출시되는 배경은? | 최근 인체의 외모나 건강증진에 대한 관심이 증가 하면서 마켓에서도 밀착형 컴프레션웨어가(Koo, 2011; Lee, Jun, & Choi, 2014; Lee, Kim, Hong, & Lee, 2015) 많이 출시되고 있고 피부변형을 반영 하면서 인체 곡면을 심미적으로 표현하는 디자인라 인에 대한 연구가 진행되고 있다(Kim, Wu, & Hong, 2015; Lee, Hong, & Lee, 2013). 또한 네트 워크 및 센서 기술 진화와 더불어 측정디 ICT, IoT 바이스로 스마트의복이 주목받고 있는데 이 때, 3 차원 인체 곡면에서 선정한 센서의 위치나 디자인라 인이 차원 의복패턴에 잘 반영되는지가 중요한 요 2 소로 인식 되고 있다 다양한 센 (Lee & Lee, 2012). |
Ashdown, S. P., Loker, S., Schoenfelder, K., & Lyman-Clarke, L. (2004). Using 3D scans for fit analysis. Journal of Textile and Apparel, Technology and Management, 4(1), 1-12.
Bye, E., & McKinney, E. (2010). Fit analysis using live and 3D scan models. International Journal of Clothing Science and Technology, 22(2/3), 88-100.
Chen, C. M. (2007). Fit evaluation within the made-to-measure process. International Journal of Clothing Science and Technology, 19(2), 131-144.
Cho, J. S., & Choi, J. W. (2002). A Study on Grading Practices of Women's Apparel Industry. Journal of the Korea Fashion & Costume Design Association, 4(3), 55-64.
Choi, J., & Hong, K. (2015). 3D skin length deformation of lower body during knee joint flexion for the practical application of functional sportswear. Applied Ergonomics, 48, 186-201.
(C)Youthhitech. (2015). YUKA CAD/Tutorial Super ALPHA : Plus. Seoul: 기술과 감성 [The technology and sensibility].
Daanen, H., & Hong, S. A. (2008). Made-to-measure pattern development based on 3D whole body scans. International Journal of Clothing Science and Technology, 20(1), 15-25.
Jang, E. Y. (2000). 패턴 CAD 활용 [The applications of the pattern CAD] -YUKA SYSTEM-. Seoul: 교학연구사. pp. 254-283.
Jeong, Y. H., & Hong, K. H. (2006). Development of 2D Tight-fitting Pattern from 3D Scan Data. Journal of the Korean Society of Clothing and Textiles, 30(1), 157-166.
Jung, M. S. (2009). Study on the Basic Bodice Pattern Grading according to the Measurement Variations of the Body. The Korean Journal of Community Living Science, 20(4), 571-578.
KATS[Korean Agency for Technology and Standards]. (2009). 성인 여성복의 치수 [Adult women's clothing size](KS K 0051). Seoul: KATS
Kim, I., & Ha, J. S. (2012). A study on design characteristics in outdoor wear. Journal of the Korean Society of Fashion Design, 12(1), 93-109.
Lee, H. (2013). Ergonomic Design and its 3D Pattern Development of Outdoor Pants Based on Skin Deformation in dynamic Postures (Unpublished doctoral dissertation). University of Chungnam National University, Daejeon, Korea.
Lee, H. R., & Hong, K. H. (2005). Development of a Fitted Bodice Pattern Using a 3D Replica of Women's Upper Body. Journal of the Korean Society of Clothing and Textiles, 29(7), 1008-1017.
Lee, M. J., & Sohn, H. S. (2012). A comparative analysis of the different between CLO 3D avatar sizing and actual body measurement shapes. Fashion business, 16(4), 137-151.
Lee, Y., & Lee, B. (2012). Effects of 2D Pattern Reduction Rate and Fabric Elasticity on 3D Clothing Deformation. Journal of The Korean Society of Living Environmental System, 19(2), 247-258.
Lim, J. Y., & Kim, Y. W. (2009). A development of the slacks pattern grading rule for middle-aged abdominal obese women. Fashion & Textile Research Journal, 11(5), 771-778.
Paek, K. J., Yoo K. J., & Lee, J. R. (2002). A Study on the Pattern Grading for Men's Formal Wear. Journal of the Korean Society of Clothing and Textiles, 26(6), 843-852.
Shin, J. H., & Sohn, H. S. (2013). A study on the development of basic bodice block pattern by women's body type from 3D virtual clothing system: Focusing on early 20's women. Journal of the Korea Fashion & Costume Design Association, 15(2), 1-13.
Shoben, M., & Taylor, P. (2004). Grading for the Fashion Industry: The Theory and Practice. LCFS Fashion Media.
Varghese, N., & Thilagavathi, G. (2012). Fit of Sari Blouse: Influencing Parameters and Assessment. Journal of Textile and Apparel, Technology and Management, 7(4).
Xu, J. H., Chen, X. F., & Zhang, W. B. (2009). A Study on Area Ease Distribution between Body and Garment. Journal of Fiber Bioengineering and Informatics, 2(2), 101-107.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.