최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국지반신소재학회논문집 = Journal of the Korean Geosynthetics Society, v.16 no.4, 2017년, pp.211 - 219
최순욱 (Geotechnical Engineering Research Institute, Korea Institute of Civil Engineering and Building Technology) , 강태호 (Geotechnical Engineering Research Institute, Korea Institute of Civil Engineering and Building Technology) , 장수호 (Geotechnical Engineering Research Institute, Korea Institute of Civil Engineering and Building Technology) , 이철호 (Geotechnical Engineering Research Institute, Korea Institute of Civil Engineering and Building Technology) , 최명식 (Silkroad T&D Co., Ltd) , 김광염 (Geotechnical Engineering Research Institute, Korea Institute of Civil Engineering and Building Technology)
The spray-applied waterproofing membrane is installed on shotcrete or concrete surface to make impermeable layer with 3-5 mm thick for the purpose of waterproofing. This study aims to determine the internal structure of a spray-applied waterproofing membrane including pores by using X-ray CT techniq...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
분무식 방수 멤브레인(spray-applied waterproofing membrane)은 무엇인가? | 분무식 방수 멤브레인(spray-applied waterproofing membrane)은 박층 분무식 라이너(thin spray-on liners)와 유사한 재료로써 같은 분무식 방법으로 시공되지만, 지보재 개념의 박층 분무식 라이너와 달리 방수(waterproofing)에 특화된 방법이다. 광산에서 낙반 등을 막는 지보재로서 사용되는 박층 분무식 라이너 역시 가스(gas) 또는 수분이동 (moisture transfer)을 막기 위한 코팅재료(coating)로써 사용되지만, 분무식 방수 멤브레인은 구조물(structures) 내부로 지하수와 같은 액체(liquid water)가 침투하지 못하도록 하는 코팅재료로서의 기능이 강하기 때문에 1차 숏크리트와 2차 숏크리트 사이에 방수(waterproofing)를 목적으로 주로 시공한다(EFNARC, 2008; Chang et al. | |
방수재를 터널공사에 사용하는 이유는? | 터널공사에서는 지반으로부터 터널 내측으로 유입되는 지하수를 막기 위해 방수재를 사용하고 있다. 방수재는 라이닝 콘크리트를 모든 침투수로부터 보호하고 침투수가 터널 내부로 유입되지 않도록 하는 역할을 한다. | |
분무식 방수 멤브레인의 시공이 어려운 경우는? | 따라서 연속적인 타설과 중첩 분사로 개별적인 이음부가 없는 방수면을 형성할 수 있는 분무식 방수 멤브레인은 터널 프로젝트에서 빈번하게 발생되는 지반과 수문학적 조건의 특정 문제에 대해서 해결책을 제공할 수 있다. 다만 타설면을 통한 지하수 유입 수준이 높을 것으로 예상되는 경우에 시공이 용이하지 않을 수 있다(ITA, 2013). |
Bradley, D., and Roth, G. (2007), "Adaptive thresholding using the integral image", Journal of Graphics Tools, Vol.12, No.2, pp.13-21.
Chung, S-Y., Kim, Y-J., Yun, T.S. and Jeon, H-G., (2011), "Evaluation of Void Distribution on Lightweight Aggregate Concrete Using Micro CT Image Processing", Journal of the Korean Society of Civil Engineers, Vol.31, No.2A, pp. 121-127.
David, C. and Darot, M., (1993), "Pore structures and transport properties of sandstone", Transport in porous media, Vol.11, pp.161-177.
Grattoni, C.A. and Dawe, R.A., (1995), "Anisotropy in pore structure of porous media", Powder Technology, Vol.85, pp. 143-151.
Holter, K.G. and Geving, S. (2016), "Moisture Transport Through Sprayed Concrete Tunnel Linings", Rock Mech. Rock Eng., Vol.49, pp.243-272.
Keller, A. (1998), "High resolution, non-destructive measurement and characterization of fracture apertures", International Journal of Rock Mechanics and Mining Sciences, Vol.35, No.8, pp.1037-1050.
Louis, L., David, C. and Robion, P. (2003), "Comparison of the anisotropic behaviour of undeformed sandstones under dry and saturated conditions", Tectonophysics, Vol.370, pp. 193-212.
Montemagno, C.D. and Pyrak-Nolte, L.J. (1999), "Fracture network versus single fractures: measurement of fracture geometry with X-ray tomography", Physics and Chemistry of the Earth, Part A: Solid Earth and Geodesy, Vol.24, No.7, pp.575-579.
Taud, H., Martinez-Angeles, R., Parrot, J.F., and Hernandez-Escobedo, L. (2005), "Porosity estimation method by X-ray computed tomography", Journal of petroleum science and engineering, Vol.47, No.3, pp.209-217.
DIN 1048 (1991), German Standard for determination of Permeability of Concrete, Part-5.
EFNARC (2008), Specification and Guidelines on Thin Spray-on Liners for Mining and Tunnelling.
EN 1928 (2000), Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of watertightness.
EN 12390-1 (2012), Testing hardened concrete. Part 1: Shape, dimensions and other requirements for specimens and moulds.
EN 12390-8 (2009), Testing hardened concrete. Part 8: Depth of penetration of water under pressure.
EN 14891 (2006), Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives-Requirements, test methods, evaluation of conformity, classification and designation.
ITA (2013), ITAtech Design guidance for spray applied waterproofing membranes. ITAtech Activity Group Lining and Waterproofing.
KSRM (2006), Standard test method for porosity and density of rock.
MOLIT (2010), Road design manual - Part 6: Tunnel, Ministry of Land, Infrastructure and Transport, pp.608-8-9.
MOLIT (2007), Tunnel design guideline, Ministry of Land, Infrastructure and Transport, p.69.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.