최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국기계가공학회지 = Journal of the Korean Society of Manufacturing Process Engineers, v.16 no.1, 2017년, pp.102 - 111
신봉수 ((주)SL) , 김성욱 (동아대학교 기계공학과) , 김종규 ((주) 센트랄) , 이권희 ((주) 센트랄)
An automobile ball joint is the element for connecting the control arm and the knuckle arm, allowing rotational motion. The ball joint consists of the stud, plug, socket, and seat. These components are assembled through the caulking process that consists of plugging and spinning. In the existing res...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Sin, B.S. "Optimum Design of a Ball Joint for Vehicle," A Thesis for a Master, Dong-A University, Republic of Korea, 2014.
Sin, B.S. and Lee, K.H., "Process Design of a Ball Joint, Considering Caulking and Pull-Out Strength," The Scientific World Journal, Vol. 2014, ID 971679, 2014.
Virtual Motion, Inc., DAFUL 4.1 User's Manual, 2012.
Lee J.K., Lee, C.H., and Bae, D.S., "A Parametric Generalized Coordinate Formulation for Mechanical Joint Elements in Dynamic Systems," Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 228, No. 6, pp. 1063-1076, 2013.
Dassault Systemses Simulia Corp., Abaqus On-Line Help, 2012.
Taguchi, G, "Systems of Experimental Design(Vol. I, II)", Kraus International Publications, New York, USA, 1987.
Phadke, M.S., Quality Engineering Using Robust Design, Prentice Hall, Englewood Cliffs, New Jersey, USA, 1989.
Teruo, M., Taguchi Methods
Park, G.J., Analytic Methods for Design Practice, Springer, London, UK, 2007.
Montgomery, D.C., Design and Analysis of Experiments, 3rdEditon, John Wiley&Sons, Singapore, 1991.
Nair, V. H., "Taguchi's Parameter Design: A Panel Discussion," Technometrics, Vol. 34, No. 2, pp. 127-161, 1992.
Lee, K. H., "A Robust Structural Design Method Using the Kriging Model to Define the Probability of Design Success," Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 224, No. 2, pp. 379-388, 2010.
Kim, K. M., "Optimization of Sheet Metal Forming Process Using Mahalanobis Taguchi System," J. of KSMPE, Vol. 15, No. 1, pp.95-102, 2016
Kim, K. M. and Park, J. C,, "Minimization of Warpage of Injection Molded Parts using Dynamic Robust Design," J. of KSMPE, Vol.14, No. 1, pp.44-50, 2015
※ AI-Helper는 부적절한 답변을 할 수 있습니다.