$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

TCAD Simulation of Silicon Pillar Array Solar Cells 원문보기

반도체디스플레이기술학회지 = Journal of the semiconductor & display technology, v.16 no.1, 2017년, pp.65 - 69  

Lee, Hoong Joo (Department of Electronic Engineering, Sangmyung University)

Abstract AI-Helper 아이콘AI-Helper

This paper presents a Technology-CAD (TCAD) simulation of the characteristics of crystalline Si pillar array solar cells. The junction depth and the surface concentration of the solar cells were optimized to obtain the targeted sheet resistance of the emitter region. The diffusion model was determin...

주제어

AI 본문요약
AI-Helper 아이콘 AI-Helper

* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.

제안 방법

  • TCAD simulation study is needed to understand the inherent physical, and geometry dependent device properties of wire array solar cells, and to optimize light absorption and carrier collection efficiency [8]. In this paper, the simulation studies based on process and device simulation, of the effect on the dimensions determining the pillar shape, such as width (or diameter), height, and spacing are presented. A proper, calibrated two-dimensional diffusion model is discussed to study the effect of emitter junction depth and surface doping concentration of the pillars.

이론/모형

  • TCAD simulation was performed using a Silvaco process and device simulator which calculates optical generation rate with a ray tracing model and solves Poisson’s and continuity equations.
본문요약 정보가 도움이 되었나요?

참고문헌 (11)

  1. Yoon, H. P., Yuwen ,Y. A., Shen, H., Podraza, N. J., Mallouk, T. E., Dickey, E. C., Redwing, J. A., Wronski, C. R., and Mayer, T. S., "Parametric Study of Micropillar Array Solar Cells," Proceeding of IEEE 37th Photovoltaic Specialists Conference, pp. 303-306, 2011. 

  2. Shin, J. C., Chanda, D., Chern, W., Yu, K. J., Rogers, J. J., and Li, X., "Experimental Study of Design Parameters in Silicon Micropillar Array Solar Cells Produced by Soft Lithography and Metal-Assisted Chemical Etching," IEEE J. of Photovoltaics, Vol. 2, pp. 129-133, 2012. 

  3. Park, W. I., Zheng, G., Jiang, X., Tian, B., and Lieber, C. M., "Controlled Synthesis of Millimeter-long Silicon Nanowires with Uniform Electronic Properties," Nano Letters, Vol. 8, pp. 3004-3009, 2008. 

  4. Spurgeon, J. M., Plass, K. E., Kayes, B. M., Brunschwig, B. S., Atwater, H. A, and Lewisb, N. S., "Repeated Epitaxial Growth and Transfer of Arrays of Patterned, Vertically Aligned, Crystalline Si Wires from A Single Si(111) Substrate," Applied Physics Letters, Vol. 93, pp. 0321121-0301123, 2008. 

  5. Garnett, E. and Yang, P., "Light Trapping in Silicon Nanowire Solar Cells," Nano Letters, Vol. 10, pp. 1082-1087, 2010. 

  6. Wong, S. M., Yu, H. Y., Li, Y., Li, J., Sun, X. W., Singh, N., Lo, P. G. Q., and Kwong, D., "Boosting Short-Circuit Current With Rationally Designed Periodic Si Nanopillar Surface Texturing for Solar Cells," IEEE Trans. Electron Devices, Vol. 58, pp. 3224-3229, 2011. 

  7. Cheng, Y., Chen, T., Chang, F., Huang, B., Pan, H., Li, C., Yu, P., and Wu, R., "Fabrication and Modeling of Large-scale Silicon Nanowire Solar Cells for Thin-film Photovoltaics," Proceeding of IEEE 38th Photovoltaic Specialists Conference, pp. 3083-3086, 2011. 

  8. Kumar, J., Manhas, S. K., Singh, D., and Vaddi, R., "Optimization of Vertical Silicon Nanowire Based Solar Cell Using 3D TCAD Simulation," Proceeding of 13th International Symposium on Integrated Circuits, pp. 528-531, 2011. 

  9. Um, H., Jung, J., Seo, H., Park, K., Jee, S., Mioz, S. A., and Lee, J., "Silicon Nanowire Array Solar Cell Prepared by Metal-Induced Electroless Etching with a Novel Processing Technology," Japanese Journal of Applied Physics, Vol. 49, pp. 04DN021-04DN025, 2010. 

  10. Jung, J., Guo, Z., Jee, S., Um H., Park, K., Hyun, M. S., Yang, J. M., and Lee, J., "A Waferscale Si Wire Solar Cell Using Radial And Bulk p-n Junctions, Nanotechnology," Vol. 21, pp. 4453031-44530317, 2010. 

  11. Wagner, H., Dastgheib-Shirazi, A., Chen, R., Dunham, S. T., Kessler, M., and Altermatt, P. P., "Improving The Predictive Power Of Modeling The Emitter Diffusion By fully including The Phosphosilicate Glass (PSG) Layer," Proceeding of IEEE 37th Photovoltaic Specialists Conference, pp. 2957-2962, 2011. 

관련 콘텐츠

이 논문과 함께 이용한 콘텐츠

저작권 관리 안내
섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로