최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.34 no.9, 2017년, pp.603 - 608
김태형 (청주대학교 항공기계공학과) , 설진운 (LIG 넥스원 기계연구소) , 허석행 (LIG 넥스원 기계연구소) , 백주현 (LIG 넥스원 기계연구소)
In this paper, a study on the effectiveness of micro-peening was accomplished for improvement of fatigue characteristics for reduction gear of manned and unmanned aircraft. The Almen saturation curve was obtained by various peening injection pressure supplied from a commercial air jet peening machin...
Kim, K. T. and Kim, J. M., “Development of the SUAV Drive System-Design and Analysis,” Aerospace Engineering and Technology, Vol. 7, No. 1, pp. 49-60, 2008.
Townsend, Dennis P., Bamberger, Eric N.. Surface fatigue life of M50NiL and AISI 9310 gears and rolling-contact bars. Journal of propulsion and power, vol.7, no.4, 642-649.
Lee, D. S. and Cheong, S. K., “Fatigue Design of Bevel Gear for Automobile by Shot Peening,” Transaction of Korean Society of Automotive Engineers, Vol. 16, No. 4, pp. 63-68, 2008.
Rhee, H. W. and Park, Y. S., “Distribution Characteristics of Residual Stresses Induced by Shot-Peening in the Aircraft Structural Material,” J. Korean Soc. Precis. Eng., Vol. 21, No. 5, pp. 149-157, 2004.
Lyu, S. K., Jeon, H. J., and Moon, B. H., “A Study on the Effect of Shot Peening Treatments on the Strength of Carburized Gears,” J. Korean Soc. Precis. Eng., Vol. 14, No. 9, pp. 61-67, 1997.
SAE J442, “Test Strip, Holder, and Gage for Shot Peening,” http://standards.sae.org/j442_201302/ (Accessed 19 JUN 2017)
SAE J443, “Procedures for Using Standard Shot Peening Almen Strip,” http://standards.sae.org/j443_201006/ (Accessed 19 JUN 2017)
SAE J1830, “Size Classification and Characteristics of Ceramic Shot for Peening,” http://standards.sae.org/j1830_201310/ (Accessed 19 JUN 2017)
Lee, D. S., Lee, K. J., Kim, T.-H., and Cheong, S. K., “A Study on the Investigation of Optimal Peening Intensity for Shot Peened Spur Gear,” Proc. of the Korean Society of Manufacturing Technology Engineers Spring Conference, pp. 185-190, 2005.
Nam, J. H., Kim, T., Lee, K. J., Lee, D. S., and Cheong, S. K., “A Study on the Fatigue Characteristics of Automotive Gear Steel by Investigating of the Optimal Peening Intensity,” Proc. of the Korean Society of Automotive Engineers Autumn Conference, pp. 1117-1122, 2004.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.