최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국화재소방학회 논문지= Fire science and engineering, v.31 no.5, 2017년, pp.19 - 27
윤홍석 (대전대학교 대학원 방재학과) , 남동군 (한국소방산업기술원 소방기술연구소) , 황철홍 (대전대학교 소방방재학과)
The effects of changes in area and location of fire source, fire growth rate, and volume of compartment on the major fire characteristics, including heat release rate, in closed compartment fires were examined. To this end, a fire simulation using Fire Dynamics Simulator (FDS) was performed for ISO ...
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
국내의 소방안전에 대한 성능위주설계(Performance-Based Design, PBD)는 어떤것을 고려하여 평가하는가? | 국내에서 2011년 이후 시행되고 있는 소방안전에 대한 성능위주설계(Performance-Based Design, PBD)에는 특정소방대상물의 용도, 구조, 수용인원, 가연물의 종류 및 양 등을 고려하여 공학기반의 화재안전 성능평가기법이 적용되고 있다. 구체적으로 화재시뮬레이션을 통해 예측되는 허용피난시간(Available Safe Egress Time, ASET)이 피난시뮬레이션에 의해 예측되는 요구피난시간(Required Safe Egress Time, RSET)보다 클 때, 건축물이 화재로부터 안전하다는 Timeline 분석이 적용되고 있다. | |
화재성장률과 구획 체적비의 함수로 표현된 최대 열발생률 상관식을 도출하여 얻는 기대효과는? | (4) 밀폐된 구획화재에서 화재성장률과 구획 체적비의 함수로 표현된 최대 열발생률의 상관식을 도출하였다. 이를 통해 국내 PBD에서 닫힌 개구부가 적용된 밀폐된 구획화재의 시뮬레이션을 위한 화재성장곡선 적용에 대한 명확한 기준을 제공할 수 있을 것으로 기대된다. 향후 천장 높이가 고정된 다양한 구획 형상 및 체적변화가 최대 열발생률에 미치는 영향이 검토될 예정이다. | |
화재시뮬레이션을 통해 화재로부터 안전하다는 것의 기준은 무엇인가? | 국내에서 2011년 이후 시행되고 있는 소방안전에 대한 성능위주설계(Performance-Based Design, PBD)에는 특정소방대상물의 용도, 구조, 수용인원, 가연물의 종류 및 양 등을 고려하여 공학기반의 화재안전 성능평가기법이 적용되고 있다. 구체적으로 화재시뮬레이션을 통해 예측되는 허용피난시간(Available Safe Egress Time, ASET)이 피난시뮬레이션에 의해 예측되는 요구피난시간(Required Safe Egress Time, RSET)보다 클 때, 건축물이 화재로부터 안전하다는 Timeline 분석이 적용되고 있다.(1) 국내 PBD에서는 화재시뮬레이션을 위하여 대표적인 화재모델인 Fire Dynamics Simulator (FDS)(2)가 주로 활용되고 있으며, 이때 ASET은 호흡한계선에서의 온도, CO 및 가시도가 인명안전 기준에 도달하는 시간에 의해 결정된다. |
K. McGrattan, S. Hostikka, R. McDermott, J. Floyd, C. Weinschenk and K. Overholt, "Fire Dynamic Simulator; User's Guide," NIST SP 1019, Sixth Edition, NIST, Gaithersburg, MD (2017).
S. H. An, S. Y. Mun, I. H. Ryu, J. H. Choi and C. H. Hwang, "Analysis on the Implementation Status of Domestic PBD (Performance Based Design) - Focusing on the Fire Scenario and Simulation," Journal of the Korean Society of Safety, submitted (2017).
W. Mell, A. Maranghides, R. McDermott and S. L. Manzello, "Numerical Simulation and Experiments of Burning Douglas Fir Trees," Combustion and Flame, Vol. 156, No. 10, pp. 2023-2041, (2009).
Y. H. Yoo, O. S. Kweon and H. Y. Kim, "The Real Scale Fire Test for Fire Safety in Apartment Housing," Journal of Korean Institute of Fire Science & Engineering, Vol. 23, No. 5, pp. 57-65, (2009).
S. C. Kim, "A Study on Fire Characteristics of Solid Combustibles Materials Based on Real Scale Fire Test," Journal of Korean Institute of Fire Science & Engineering, Vol. 25, No. 5, pp. 62-68, (2011).
H. J. Kim, I. K. Kwon, O. S. Kweon, H. Y. Kim and S. U. Chae, "The Real Fire Test in Bedroom for the Performance Based Fire Design," Fire Science and Engineering, Vol. 27, No. 6, pp. 32-37, (2013).
D. G. Nam and C. H. Hwang, "Measurements of the Heat Release Rate and Fire Growth Rate of Combustibles for the Performance-Based Design-Focusing on the Combustibles in Residential and Office Spaces," Fire Science and Engineering, Vol. 31, No. 2, pp. 29-36, (2017).
C. H. Hwang, A. Lock, M. Bundy, E. Johnsson and G. H. Ko, "Effects of Fuel Location and Distribution on Full-scale Underventilated Compartment Fires," Journal of Fire Science, Vol. 29, pp. 21-52, (2011).
S. Y. Mun, C. H. Park, C. H. Hwang and S. H. Park, "Effects of the Geometry and Location of an Vertical Opening on the Fire Characteristics in the Under-Ventilated Compartment Fire," Fire Science and Engineering, Vol. 27, No. 3, pp. 20-29, (2013).
C. H. Hwang, C. H. Park, G. H. Ko and A. Lock, "An Experimental Study on Relationship between Global Equivalence Ratio and Fire Characteristics in Full-Scale Compartment Fire," Journal of the Korean Society of Combustion, Vol. 15, No. 3, pp. 32-39, (2010).
W. G. Weng, W. C. Fan, L. Z. Yang, H. Song, Z. H. Deng, J. Qin and G. X. Liao, "Experimental Study of Back-Draft in a Compartment with Openings of Different Geometries," Combustion and Flame, Vol. 132, pp. 709-714 (2003).
J. G. Quintiere, W, J. Rinkinen and W. W. Jones, "The Effect of Room Openings on Fire Plume Entrainment," Combustion Science and Technology, Vol. 26, No. 5-6, pp. 193-201, (1981).
I. R. Thomas and I. D. Bennetts, "Fires in Enclosures with Single Ventilation Openings-Comparison of Long and Wide Enclosures," Fire Safety Science-Proceedings of the Sixth International Symposium, pp. 941-952 (2000).
NFSC 501A, "National Fire Safety Code for Design Guidelines for Smoke Control System of Special Evacuation Stairwell and Lobby" (2015).
U.S. NRC and EPRI, "Nuclear Power Plant Fire Modeling Analysis Guidelines," NUREG-1934 and EPRI 1023259, Finial Report (2012).
K. McGrattan, J. Floyd, G. Forney, H. Baum and S. Hostikka, "Improved Radiation and Combustion Routines for a Large Eddy Simulation Fire Model," In: Fire Safety Science-Proceedings of the Seventh International Symposium, Worcester, MA, pp. 827-838 (2003).
C. H. Hwang, C. H. Park, G. H. Ko and A. Lock, “Effects of Ventilation Condition on the Fire Characteristics in Compartment Fires (Part I: Performance Estimation of FDS),” Journal of Korean Institute of Fire Science & Engineering, Vol. 24, No. 3, pp. 131-138, (2010).
S. Y. Mun, C. H. Hwang, J. S. Park and K. Do, “Validation of FDS for Predicting the Fire Characteristics in the Multi-Compartments of Nuclear Power Plant (Part II: Underventilated Fire Condition),” Journal of Korean Institute of Fire Science & Engineering, Vol. 27, No. 2, pp. 80-88, (2013).
C. H. Hwang, "Large Eddy Simulation of Turbulent Premixed Flames in a Practical Combustor," Ph. D. Thesis, Inha University, South Korea (2006).
K. McGrattan, S. Hostikka, R. McDermott, J. Floyd, C. Weinschenk and K. Overholt, "Fire Dynamic Simulator; Technical Reference Guide, Volume 1: Mathematical Model," NIST SP 1018-1, Sixth Edition, NIST, Gaithersburg, MD (2017).
NFPA, "Standard for the Installation, Maintenance and Use of Auxiliary Protective Signaling Systems for Fire Alarm Service," Standard: NFPA-72B (1986).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.