최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기반도체디스플레이기술학회지 = Journal of the semiconductor & display technology, v.17 no.2, 2018년, pp.61 - 66
The objective of this research study is to investigate the optimal process parameters of electrical discharge machining (EDM) on SCM440 steel with copper as a tool electrode. The effect of various process parameters on machining performance is investigated in this study. Modern ED machinery is capab...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
SCM440강의 특징은 무엇인가? | 본 연구에서는 방전전류 (current), 방전시간(pulse on-time), 방전전압 (voltage), 서보속도(servo speed), 방전속도 (spark speed) 등의 방전가공조건에 따라 구리전극을 사용하여 가공된 재료의 표면거칠기에 미치는 영향을 알아보았다. 사용된 시편은 SCM440강으로 구조용강의 하나이며 기계적 성질이 우수하고 열처리에 의해 성질을 개선시켜 사용하며, 구조용 합금강은 구조용 탄소 강의 기계적 성질을 합금원소를 첨가하여 개량한 재질로서 축(shaft)류, 기어(gear)류, 너트(nut)류 등 강인성을 필요로 하는 기계부품에 사용된다. 실험의 효율적인 결과도출을 위해 실험계획법 중의 하나인 Taguchi법을 사용하였다. | |
방전가공조건은 어떤 요소를 포함하는가? | 방전가공조건이란 기계의 제어회로에 내장 되어있는 기능 중 가공속도와 정밀도를 제어하는 요소를 포함하고 있다. 본 연구에서는 방전전류 (current), 방전시간(pulse on-time), 방전전압 (voltage), 서보속도(servo speed), 방전속도 (spark speed) 등의 방전가공조건에 따라 구리전극을 사용하여 가공된 재료의 표면거칠기에 미치는 영향을 알아보았다. 사용된 시편은 SCM440강으로 구조용강의 하나이며 기계적 성질이 우수하고 열처리에 의해 성질을 개선시켜 사용하며, 구조용 합금강은 구조용 탄소 강의 기계적 성질을 합금원소를 첨가하여 개량한 재질로서 축(shaft)류, 기어(gear)류, 너트(nut)류 등 강인성을 필요로 하는 기계부품에 사용된다. | |
방전가공은 어떤 재료의 가공에 활용되고 있는가? | 방전가공은 반도체기술의 혁신으로 제어기술의 발달을 가져와 고속가공이 가능하게 되었으며 금형, 항공우주산업, 전자공업 등 산업전반 에 걸쳐 다양 하게 사용되고 있다. 특히 일반 범용공작기계로는 가공에 어려움이 있는 금형제작과 같이 난삭재를 주로 사용하는 분야에서 필수적이며, 내열재료, 형상가공, 절단, 난삭성재료 등에 많이 사용되고 있음은 물론 비철금속재료의 가공에도 활용되고 있다. 또한 이 가공법은 재료의 경도에 무관하게 가공할 수 있으며, 매우 복잡한 형상의 부품을 저렴한 방전전극을 사용하여 고정도의 부품을 가공할 수 있으므로 산업체에서 선호하는 가공법 중의 하나이다[1-5]. |
Shasikant, V., Roy, A.K., "Kaushikkumar, Effect and Optimization of Machine Process Parameters on MRR for EN19 and EN41 Materials using Taguchi Method," Procedia Technology, Vol. 14, pp. 204-210, 2014.
Roy, A.K., Kaushik Kumar, "Effect and Optimization of various Machine Process Parameters on the Surface Roughness in EDM for an EN41 Material using Grey Taguchi," Procedia Materials Science, Vol. 6, pp. 383-390, 2014.
Jahan, M.P., Yang, Y.S., Rahman, M., "A Study on the Fine-finish De-sinking micro-EDM of Tungsten carbide using Different Electrode Materials, "Journal of Materials Processing and Technology," Vol. 209, pp. 3956-3957, 2009.
Kuppan, P., Rajadurai, A., Narayanan, S., "Influence of EDM Process Parameters in Deep Hole Drilling of Inconel 718," International of Journal of Advanced Manufacturing Technology, Vol. 38, pp. 74-84, 2008.
Singh, S.K., Kumar, N., "Optimizing the EDM Parameters to Improve the Surface Roughness of Titanium Alloy(Ti-6AL-4V), International Journal of Emerging Science and Engineering," Vol. 1, pp. 2319-6378, 2013.
Meetham, G.W., "High Temperature Materials-a General Review," J. Mater. Sci. Vol. 26, pp. 853-860, 1991.
Fitzer, E. "Future of Carbon-Carbon Composites," Carbon Vol. 25(2), pp. 163-190, 1987.
Manocha, L.M., Bahl, O.P., Singh, Y.K., "Fiber Matrix Interface in Carbon-Carbon Composite-Effect of Surface Morphology of Carbon Fibers," Carbon Vol. 27(3), pp. 381-387, 1989.
Lau, W.S., Wang, M., Lee, W.B., "Electrical Discharge Machining of Carbon Fiber Composite Materials," Int. J. Mach. Tools Manuf. Vol. 30(2), pp 297-308, 1990.
Hocheng, H., Guu, Y.H., Tai, N.H., "The Feasibility Analysis of Electrical Discharge Machining of Carbon-Carbon Composites, "Mater. Manuf. Process. Vol. 13(1), pp. 117-132, 1998.
Koenig, W., Dauw, D.F., Levy, G., Panten, U., "EDM - Future Steps towards the Machining of Ceramics", Ann. CIRP Vol. 37, No. 2, pp. 625-631, 1998.
M.S. Phadke, "Quality Engineering using Robust Design, "Prentice-Hall, Englewood Cliffs, NJ, 1989.
Yang, W.H., Tarng, Y.S., "Design Optimization of Cutting Parameters for Turning Operations based on the Taguchi Method, J. Mater. Process". Technol. Vol. 84, pp. 122-129, 1998.
D.C. Montgomery, "Design and Analysis of Experiments, "Wiley, New York, 2001.
Y.S. Tarang, W.H. Yang, "Application of the Taguchi Method to the Optimization of the Submerged Arc Welding Process, "Mater. Manuf. Process. Vol. 13(3), pp. 455-467, 1998.
D.R. Cox, N. Reid, "The Theory of the Design of Experiments, "Chapman & Hall/CRC Press, London/Boca Raton, FL, 2000.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.