$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

Design of a See-through Off-Axis Head-Mounted-Display Optical System with an Ellipsoidal Surface 원문보기

Current optics and photonics, v.2 no.3, 2018년, pp.280 - 285  

Wang, Junhua (Shanghai Engineering Center of Ultra-precision Optical Manufacturing, Department of Optical Science and Engineering, Fudan University) ,  Zhou, Qing (Shanghai Engineering Center of Ultra-precision Optical Manufacturing, Department of Optical Science and Engineering, Fudan University) ,  Chen, Jie (Shanghai Engineering Center of Ultra-precision Optical Manufacturing, Department of Optical Science and Engineering, Fudan University) ,  Hou, Lexin (Shanghai Engineering Center of Ultra-precision Optical Manufacturing, Department of Optical Science and Engineering, Fudan University) ,  Xu, Min (Shanghai Engineering Center of Ultra-precision Optical Manufacturing, Department of Optical Science and Engineering, Fudan University)

Abstract AI-Helper 아이콘AI-Helper

A new method to design a see-through off-axis head-mounted-display (OA-HMD) optical system with an ellipsoidal surface is proposed, in which a tilted ellipsoidal surface is used as the combiner, which yields the benefits of easier fabrication and testing compared to a freeform surface. Moreover, we ...

주제어

AI 본문요약
AI-Helper 아이콘 AI-Helper

* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.

제안 방법

  • The ellipsoidal combiner satisfies a “pupil-stop conjugate” requirement between the stop (exit pupil) and intermediate pupil, so that the aberration field is uniformly distributed, which reduces the generation of aberration and enables a simplified structure of the relay lens group. By analyzing the intermediate image and the intermediate pupil parameters, a relay lens group consisting of 7 pieces of coaxial relay lenses can correct tilted and curved intermediate images. When solving for the initial structure of the relay lens group, the evaluation criteria are that the spot diagram must be uniformly distributed on the aberration field, and the spot diagram’s RMS radius must be as small as possible.

이론/모형

  • Tolerance analysis is a tradeoff among the performance requirements of an optical system, processing costs of the optical elements, and assembly costs of an optical system, thereby determining its processing parameters and assembly requirements [10]. The tolerance analysis of the OA-HMD optical system uses 1000 Monte Carlo simulations to analyze the MTF value of the 3-mm subpupils, and uses the tolerance value of the OA-HMD optical system calculated by data from the Zemax software. It is obvious that the optical system has a loose tolerance and can be assembled easily.
본문요약 정보가 도움이 되었나요?

참고문헌 (13)

  1. D. W. Cheng, Y. T. Wang, H. Hua, and M. M. Talha, "Design of an optical see-through head-mounted display with a low f-number and large field of view using a freeform prism," Appl. Opt. 48, 2655-2668 (2009). 

  2. J. P. Rolland, "Wide-angle, off-axis, see-through head-mounted display," Opt. Eng. 39, 1760-1767 (2000). 

  3. J. M. Yang, W. Q. Liu, W. Z. Lv, D. L. Zhang, F. He, Z. L. Wei, and Y. Kang, "Method of achieving a wide field-of-view head-mounted display with small distortion," Opt. Lett. 38, 2035-2037 (2013). 

  4. J. M. Yang, P. Twardowski, P. Gerard, and J. Fontaine, "Design of a large field-of-view see-through near to eye display with two geometrical waveguides," Opt. Lett. 41, 5426-5429 (2016). 

  5. J. H. Wang, Y. C. Liang, and M. Xu, "Design of a low distortion head-mounted display with freeform reflective mirror based on two ellipsoids structure," J. Opt. Soc. Korea 20, 234-238 (2016). 

  6. H. J. Choi, J. M. Ryu, and J. H. Kim, "Tolerance analysis of focus-adjustable head-mounted displays," Curr. Opt. Photon. 1, 474-490 (2017). 

  7. B. Chen and A. M. Herkommer, "Alternate optical designs for head-mounted displays with a wide field of view," Appl. Opt. 56, 901-906 (2017). 

  8. M. K. Tehrani and S. S. M. Fard, "Design of diffraction limited head mounted display optical system based on high efficiency diffractive elements," Curr. Opt. Photon. 1, 150-156 (2017). 

  9. Z. R. Zheng, X. Liu, H. F. Li, and L. Xu, "Design and fabrication of an off-axis see-through head-mounted display with an x-y polynomial surface," Appl. Opt. 49, 3661-3668 (2010). 

  10. J. H. Wang, Y. C. Liang, and M. Xu, "Design of a see-through head-mounted display with a freeform surface," J. Opt. Soc. Korea 19, 614-618 (2015). 

  11. L. D. Wei, Y. C. Li, J. J. Jing, L. Feng, and J. S. Zhou, "Design and fabrication of a compact off-axis see-through head-mounted display using a freeform surface," Opt. Express 26, 8550-8565 (2018). 

  12. J. H. Wang, Y. C. Liang, and M. Xu, "Design of panoramic lens based on ogive and aspheric surface," Opt. Express 23, 19489-19499 (2015). 

  13. H. C. Peng, D. W. Cheng, J. Han, C. Xu, W. T. Song, L. Z. Ha, J. Yang, Q. X. Hu, and Y. T. Wang, "Design and fabrication of a holographic head-up display with asymmetric field of view," Appl. Opt. 53, H177-H185 (2014). 

저자의 다른 논문 :

관련 콘텐츠

오픈액세스(OA) 유형

GOLD

오픈액세스 학술지에 출판된 논문

이 논문과 함께 이용한 콘텐츠

섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로