최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국표면공학회지 = Journal of the Korean institute of surface engineering, v.51 no.3, 2018년, pp.149 - 156
The corrosion and strength degradation characteristics of 1.25Cr-0.5Mo steels were studied under
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
Cr-Mo강의 특징은? | Cr-Mo강은 높은 강도, 우수한 내식성으로 인해 격납 용기, 히터 튜브, 증기발생용 튜브, 그리고 과열기 튜브와 같은 발전설비의 구성요소로 널리 사용되고 있다[1]. 이와 같이 발전설비용 주요 구성요 소들은 350 ~ 600 o C의 온도범위에서 사용된다[2]. | |
대기 및 연소가스에 포함된 SO2는 합금에 어떤 영향을 미치는가? | 석탄을 주 연료로 사용하는 화력발전설비의 증기발생용 튜브 및과열기 튜브는 강한 부식성의 SO2가 포함된 연소 가스에 지속적으로 노출된다. 대기 및 연소가스에 포함된 SO2 는 합금의 산화 및 고온부식을 가속화 시킨다[3]. 특히, Cr 함량이 적은 저 Cr-Mo강은 고온의 SO2 가스 환경에서 부식공격에 매우 취약하다. | |
650oC의 76%N2+6%O2+16%CO2+2%SO2 환경에서 1.25Cr-0.5Mo강의 부식 및 강도저하 특성은 어떻게 나타나는가? | 표면에 형성된 접착력과 내구성이 불량한 Fe-산화층으로 인하여 재료의 단면적이 감소되어 재료의 강도가 저하하는 경향을 나타냈다. 초기(100시간 이내) 재료의 강도저하는 열화온도에 따른 연화에 주로 영향을 받았다. 이후 열화시간 경과에 따라 Fe-산화층 형성에 기인한 단면적 감소로 강도저하 현상이 관찰되었다. 파단면은 전반적으로 파단부 가장자리에 미소 균열이 존재하는 형상을 나타냈으며, 열화시간 경과에 따른 파단양상의 변화는 뚜렷하게 나타나지 않았다. |
Handbook, M. (1990). Properties and selection: Irons steels and high performance alloys, Vol. 1; ASM International. Handbook Committee.
Bhadeshia HKDH. Bainite in steels. London: The Institute of Materials; 1992. p. 329-46.
S. K. Das, A. Joarder, A. Mitra, Magnetic Barkhausen emissions and microstructural degradation study in 1.25 Cr-0.50 Mo steel during high temperature exposure. NDT & E Int., 37(3) (2004) 243-248.
A. del Carmen Wong-Moreno, A. B. Luisillo, Hightemperature oxidation of 1.25 Cr-0.5 Mo steel in $SO_2$ , Oxid. Met., 35(3-4) (1991) 245-258.
A. Jardnas, J. E. Svensson, L. G. Johansson, Evidence for suppression of the oxidation of a Fe 2.25 Cr 1 Mo steel by traces of $SO_2$ , In Materials science forum, 369, Trans Tech Publ., (2001) 173-180.
A. Skalli, A. Galerie, M. Caillet, Thermal corrosion of a chromium-molybdenum steel by $SO_2$ . Kinetic, thermodynamic and morphological aspects. Solid State Ionics, 34(4) (1989) 261-267.
P. Viklund, Superheater corrosion in biomass and waste fired boilers: characterisation, causes and prevention of chlorine-induced corrosion. Diss. KTH R. Inst. Technol., (2013) 6.
S. M. Bruemmer, B. W. Arey and L. A. Charlot. Influence of chromium depletion on intergranular stress corrosion cracking of 304 stainless steel, Corros., 48 (1992) 42-49.
S. Zhang, T. Shibata, T. Haruna, Initiation and propagation of IGSCC for sensitized type 304 stainless steel in dilute sulfate solutions, Corros. Sci., 39 (1997) 1725-1739.
A. Y. Kina, V. M. Souza, S. S. M. Tavares, J. M. Pardal, J. A. Souza, Microstructure and intergranular corrosion resistance evaluation of AISI 304 steel for high temperature service, Mater. charact., 59 (2008) 651-655.
K. G. Nam, Y. S. He, J. C. Chang, K. S. Shin, Microstructural Evolution of Super304H Steel upon Long-Term Aging, Key Eng. Mater., 727 (2017) 36-42.
X. Bai, J. Pan, G. Chen, J. Liu, J. Wang, T. Zhang, W. Tang, Effect of high temperature aging on microstructure and mechanical properties of HR3C heat resistant steel, Mater. Sci. and Tech., 30 (2014) 205-210.
D. A. Jones, Principles and prevention of corrosion. (1992) Macmillan.
A. Iseda, H. Okada, H. A. Semba, M. Igarashi, Long term creep properties and microstructure of SUPER304H, TP347HFG and HR3C for A-USC boilers, Energy Mater., 2 (2007) 199-206.
M. Farooq, Strengthening and degradation mechanisms in austenitic stainless steels at elevated temperature, Diss. KTH Royal Institute of Technology (2013) 26.
E. A. Trillo, L. E. Murr, Effects of carbon content, deformation, and interfacial energetics on carbide precipitation and corrosion sensitization in 304 stainless steel, Acta mater., 47 (1998) 235-245.
E. A. Trillo, R. Beltran, J. G. Maldonado, R. J. Romero, L. R. Murr, W. W. Fisher, A. H. Advani, Combined effects of deformation (strain and strain state), grain size, and carbon content on carbide precipitation and corrosion sensitization in 304 stainless steel, Mater. Charact., 35 (1995) 99-112.
H. Tanaka, M. Murata, F. Abe, H. Irie, Microstructural evolution and change in hardness in type 304H stainless steel during long-term creep, Mater. Sci. and Eng., A 319 (2001) 788-791.
X. Xiao, G. Liu, B. Hu, J. Wang, W. Ma, Coarsening behavior for $M_{23}C_6$ carbide in 12% Cr-reduced activation ferrite/martensite steel: experimental study combined with DICTRA simulation, J. Mater. Sci., 48 (2013) 5410-5419.
W. Wang, Z. Wang, W. Li, J. Tian, W. Zhong, J. Lin, "Evolution of $M_{23}C_6$ phase in HR3C steel aged at $650^{\circ}C$ ." Mater. High Temp., 33 (2016) 276-282.
N. Otsuka, Fracture behavior of steam-grown oxide scales formed on 2-12% Cr steels. Materials at High Temperatures, 22(1-2) (2005) 131-138.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.