최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기KEPCO Journal on electric power and energy, v.4 no.1, 2018년, pp.25 - 31
Yoo, Keun-Bong (KEPCO Research Institute, Korea Electric Power Corporation) , He, Yinsheng (KEPCO Research Institute, Korea Electric Power Corporation) , Lee, Han-Sang (KEPCO Research Institute, Korea Electric Power Corporation) , Bae, Si-Yeon (KEPCO Research Institute, Korea Electric Power Corporation) , Kim, Doo-Soo (KEPCO Research Institute, Korea Electric Power Corporation)
A boiler system transforms water to pressured supercritical steam which drives the running of the turbine to rotate in the generator to produce electricity in power plants. Materials for building the tube system face challenges from high temperature creep damage, thermal fatigue/expansion, fireside ...
Abe, F., "Progress in Creep-Resistant Steels for High Efficiency Coal-Fired Power Plants", Journal of Pressure Vessel Technology, Vol. 138, 2016, pp. 040804.
Shingledecker, J., "The Advanced Austenitic Stainless Steels Handbook: 347HFG, SUPER304H, HR3C"., EPRI, 2013.
Abe, F., "Research and Development of Heat-Resistant Materials for Advanced USC Power Plants with Steam Temperatures of $700^{\circ}C$ and Above". Engineering, Vol. 1, 2015. pp. 211-224.
Eggler, G, "The effect of long-term creep on particle coarsening in tempered martensitic ferritic steels", Acta Metallurgica, vol, 37, 1989, pp. 3225-3234.
Milovi?, L., et al., "Microstructures and mechanical properties of creep resistant steel for application at elevated temperatures", Materials & Design, Vol. 46, 2013, pp. 660-667.
Hald, J., "Microstructure and long-term creep properties of 9- 12% Cr steels", International Journal of Pressure Vessels and Piping, Vol. 85, 2008, pp. 30-37.
Klotz, U.E., C. Solenthaler, and P.J. Uggowitzer, "Martensitic- austenitic 9-12% Cr steels-Alloy design, microstructural stability and mechanical properties". Materials Science and Engineering: A, Vol 476 2008, pp. 186-194.
Y.S. He, J.C. Chang, J.L. Dong and K. Shin, "Microstructural Evolution of X20CrMoV12.1 Steel Upon Long-Term On-Site Exposure in Power Plants", Advanced Science Letters, Vol. 4, 2011, pp. 1416-1423.
Y.S. He, J.L. Dong, J.S. Juang and K. Shin, "An Improved nondestructive replication metallography method for investigation of the precipitates in Cr-Mo-V turbine steel", Surface and Interface Analysis, Vol. 44, 2012, pp. 1411-1414.
H.S. Lee, J.S. Jung, D.S. Kim, K.B. Yoo, "Failure Analysis on welded joints of 347H austenitic boiler tubes", Engineering Failuer Analysis, Vol.57, 2015, pp 413-422.
Fry, A., S. Osgerby, and M. Wright, "Oxidation of Alloys in Steam Environments - A Review". NPL Report. MATC (A) 90, 2002.
Tan, L., X. Ren, and T.R. Allen, "Corrosion behavior of 9-12% Cr ferritic-martensitic steels in supercritical water. Corrosion Science", Vol. 52, 2010, pp. 1520-1528.
Xia, Z.X., et al., "Improve oxidation resistance at high temperature by nanocrystalline surface layer". Scientific Reports, 13027, 2015.
Hoelzer, D.T., B.A. Pint, and I.G. Wright, "A microstructural study of the oxide scale formation on ODS Fe-13Cr steel". Journal of Nuclear Materials, Vol. 283-287, 2000, pp. 1306-1310.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.