최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국유화학회지 = Journal of oil & applied science, v.35 no.3, 2018년, pp.606 - 611
한상일 (창원대학교 화공시스템공학과) , 이동욱 (부산대학교 화공생명공학부) , 황규석 (부산대학교 화공생명공학부)
City natural gas is classified flammable hazardous gas and should be secured according to explosion risk assessment determined by Industrial Standard KS C IEC. In this study, leak size, ventilation grade and effectiveness were adopted to the KS C IEC for risk assessment in natural gas supply system....
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
도시가스는 어떻게 구분되는가? | 도시가스(City Gas)는 액화천연가스(Liquefied Natural Gas: LNG), 액화석유가스(Liquefied Petroleum Gas: LPG), 천연가스(Natural Gas : NG)의 세 가지로 구분되며 [1],LPG는 프로판과 부탄을 주성분으로 상온에서 압축하여 액화한 것이며, NG는 액화천연가스를 다시 기화하여 천연가스 상태로 배관을 통해 공급되는 메탄가스를 주성분으로 한다. | |
외부 누출 시 폭발의 위험성이 큰 도시가스는 어떻게 관리해야하는가? | 도시가스는 외부 누출 시 폭발의 위험성이 크므로 산업안전보건법의 안전보건 기준에 관한 규칙 제 230조(폭발위험이 있는 장소의 설정 및 관리)에서 한국산업표준으로 정하는 기준에 따라 가스폭발 위험장소를 설정·관리하도록 하고 있다. 그 밖에 고압가스 안전관리법, 액화석유가스의 안전관리법 및 도시가스사업법은 KGS GC201 “가스시설 전기방폭 기준”을 통하여 가스 사용시설의 전기설비 방폭 기준을 제시하고 있으나 폭발위험장소 구분을 위한 기술기준은 별도로 제시하고 있지 않다[2]. | |
KSC IEC 60079-10-1에서 제시하는 폭발위험장소의 구분과 누출 시의 예방법은? | 국내·외적으로 폭발위험장소 구분을 위한 기술기준은 국내는 IEC와 부합하는 한국산업표준 KSC IEC 60079-10-1을 제시하고 있으며 국외의 경우 북미에서는 API 505, NFPA 505, NEC 505, 유럽에서는 EI part 15를 적용하고 있다 [4,5,6]. 한국산업표준은 국제 기준에 따라 폭발 위험장소를 0종 장소, 1종 장소, 2종 장소 및 비 위험장소로 구분하고 있으며, 위험장소에 해당되는 경우 위험물 누출 시 주변의 전기 기계·기구가 점화원이 되지 않도록 그 지역의 위험등급에 적합하게 선정된 방폭용 전기 기계·기구를 사용하도록 하고 있다. 그러나 KS C IEC 표준은 가스 폭발하한계 구성범위를 예측하기 위한 가스 누출률 계산 누출공 크기, 환기 등급을 위한 품질계수, 환기유효성 등에 대한 세부적인 기준 및 평가 방법은 제시되어 있지 않고 가장 기본적인 개념만 설명하고 있으며, 현장 특성에 따른 추가적인 사 항에 대해서는 전문가적인 접근이나 국가의 기술기준을 통하여 계산하도록 권장하고 있다. |
S. Kumar, H. Kwon, K. Choi, W. Lim, J. H. Cho, K. Tak, I. Moon, "LNG: An Eco-friendly Cryogenic Fuel for Sustainable Development", Applied Energy, Vol.88, No.12, pp.4264-4273, (2011).
Ha DM et al. Code for explosion-proof electrical equipment of gas facilities, Korea Gas Safety Corporation, (2018).
Ivings MJ, Klsey A. Technical Input on Ventilation Effectiveness for Area Classification Guidance EI15, Health and Safety Executive, (2014).
KS C IEC 60079-10-1, Explosive atmospheres-Part-10-1:Classification of areas, Korea Industrial Standard, (2012).
Energy Institute, Area classification code for installations handling flammable fluids, London: Energy Institute, (2005).
API RP 505, Classification of locations for electrical installations at petroleum facilities classified as class 1, zone 0, zone 1 and zone 2, American Petroleum Institute, (1997).
Kwon, J.A Study on the Establishing of the Explosion-hazardous Area of Boiler Room on the City Gas-using Facility, M.S. Thesis, Seoul National University of Technology, (2014).
Ivings MJ, Clarke S, Gant SE. Area Classification for secondary releases from low pressure natural gas systems, Health and Safety Executive Research Report, RR630, (2008).
Gant SE, Ivings MJ. CFD Modelling of Low Pressure Jets for Area Classification, Health and Safety Executive Research Report, (2005).
R. Tommasini, E. Pons, "Classification of hazardous areas produced by maintenance interventions on N.G. distribution networks and in presence of open surface of flammable liquid," Proc. Of 58thIndustry Applications Society Annual IEEE Petroleum and Chemical Industry Conference, pp. 1-10, (2011).
S. Dharmavaram, S. R. Hanna, O. R. Hansen, "Consequence Analysis-Using a CFD Model for Industrial Sites", Process Safety Progress, Vol.24, No.4, pp. 272-316, (2005).
M. Vidal, W. J. Rogers, J. C. Holste, M. S. Mannan, "A Review of Estimation Methods for Flash Points and Flammability Limits", Process Safety Progress, Vol.23, No.1, pp. 47-55, (2004).
J. Yim, C. Chung, "Validity Review on Classification of Explosion Hazardous Area using Hypothetic Volume", Journal of the Korean Society of Safety, Vol.29, No.6, pp. 68-75, (2014).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.