최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국금형공학회지 = Journal of the Korea Society of Die & Mold Engineering, v.12 no.1, 2018년, pp.13 - 17
이춘규 (공주대학교 금형설계공학과) , 최계광 (공주대학교 금형설계공학과)
It was analyzed and experimented on the change of the material thickness according to the size of the "R" of the punch and die corners using the material of SCP-1 0.25mm As a result, the following conclusions were obtained. Tensile strength analysis and safety analysis of materials are very importan...
Chun kyu Lee Three other than, "Press Die Design Manual that is easy to know", Kijeon Media, pp. 166-168, 2012.
Sea hwan Kim, "Study on the Punch and die for each copy, drawing each design radius of the hole", Korea Die & Mold Engineers, pp. 16-23, 2008.
Gye gwang Choi, Chan gyo Pak, Korea Die & Mold Engineers, 2008, Summer symposium, pp. 17-22, 2008 June 24.
Chun kyu Lee, Seung-Done Nam, "A Study on the Influence of the Integrated Structure and Independent of the Die Pad orocess", J. Korea Saf. Manag, Vol. 17 No2, n the Products thickness in the Drawing P2015.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.