최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국기계가공학회지 = Journal of the Korean Society of Manufacturing Process Engineers, v.18 no.1, 2019년, pp.101 - 108
조동현 (대진대학교 컴퓨터응용기계공학과) , 백남도 (제일산업)
In this study, the hole-cavity resonance technology and the micro pore stainless chip sintering technology were fused to develop silencers with excellent noise attenuation performance even at fluid pressures exceeding 30 bar for the first time at home and abroad. As a result of this study, the noise...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Piao, C. H., Cho, C. D., Heo, J. Y., Kim, M. G. and Lee, J. H., "Study on Spring Constant Analysis of Welded Metal Bellows by Using FEM," The Korean Society of Mechanical Engineers, pp. 897-901, 2015.
Kim, Y. O., "Design Variables Optimization of Edge Welded Metal Bellows by Using Taguchi Method," Inha Univ., Master's Thesis, 2016.
Lee, T. E., Suh, J. S., Jeong, S. H. and Park, Y. S., "A Study on Thermal and Fluid Characteristics inside Engine Room of Auxiliary Powr Unit for Tracked Vehicle", Journal of the Korean Society for Precision Engineering, Vol. 26, No. 12, pp. 85-93, 2009.
Lee, T. E., Suh, J. S. and Park, Y. S., "A Study on Temperature Distribution Characteristics inside Engine Room of the Auxiliary Power Unit for Tracked Vehicle", KSPE 09S451, pp. 821-822, 2009.
Sim, H. S., Jun, J. H., "A Design for Water Cooling of a Marine Diesel Engine with Verification of Improvement", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 6, pp.58-63, 2016.
Lee, C. S., "A Study on the Exhaust Gas After Treatment for Small Ship," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 3, pp.76-81, 2017.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.