최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기공업화학 = Applied chemistry for engineering, v.30 no.5, 2019년, pp.546 - 555
원용태 (가톨릭관동대학교 환경공학과) , 이승목 (가톨릭관동대학교 환경공학과)
The purpose of this study was to improve the performance of the bogie-type crematory, which is the mainstream of domestic crematory equipment. A field scale technology was investigated via increasing the volume by changing the shape of the furnace and reducing the cremation time and saving the energ...
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
pilot 화장로 설비의 구성은? | Figure 1에 보여주는 pilot 화장로 설비는 실증크기의 주연소실과 배가스덕트 및 고온싸이크론, 폐열회수를 위한 가스냉각기, 백필터 여과 집진기, 그리고 유인배풍기와 연돌로 구성되어있다. 개선화장로의 경우, 기존화장로 연소실과 대비하여 내부용적을 증대시키기 위하여 주 연소로 연소실의 공간높이를 기존 설비보다 높여 제작함으로 기존화 장로대비 용적율을 1. | |
개선화장로가 기존화장로 연소실에 달라진 점은? | Figure 1에 보여주는 pilot 화장로 설비는 실증크기의 주연소실과 배가스덕트 및 고온싸이크론, 폐열회수를 위한 가스냉각기, 백필터 여과 집진기, 그리고 유인배풍기와 연돌로 구성되어있다. 개선화장로의 경우, 기존화장로 연소실과 대비하여 내부용적을 증대시키기 위하여 주 연소로 연소실의 공간높이를 기존 설비보다 높여 제작함으로 기존화 장로대비 용적율을 1.7배 정도 증대시켰다. 이를 통해 초기 부장품이나 목관 등 가연성 물질들의 연소단계에서 생성되는 과잉 가스양의 제어를 효율적으로 수행할 수 있었으며, 본 장치의 온도제어를 위한 주에너지원은 LPG 버너를 사용하였다. | |
개선화장로를 통해 효율적으로 수행할 수 있었던 것은 무엇인가? | 7배 정도 증대시켰다. 이를 통해 초기 부장품이나 목관 등 가연성 물질들의 연소단계에서 생성되는 과잉 가스양의 제어를 효율적으로 수행할 수 있었으며, 본 장치의 온도제어를 위한 주에너지원은 LPG 버너를 사용하였다. 또한, 로 내 연소가스의 체류 시간을 연장시키고 에너지효율의 증대와 함께 연소시간을 단축시키기 위해 로 상부에 상단 덕트를 추가 설치하였다. |
Ministry of Health and Welfare (MOHW), The Cremation Rate of Korea in 2018, Korea (2019).
C. S. Yang, Facility Standard and Spatial Model Planning for the Crematory Facilities, Masters Dissertation, Hong-ik University, Seoul, Korea (2017).
K. H. Kim, H. Y. Jung, J. S. Park, O. J. Kwon, M. Y. Kim, J. I Son, Y. H. Hong, S. W. Lee, and Y. L. Kim, Measures to prevent emissions of PCDDs/DFs from crematories in Korea, J. Korea Soc. Waste Manag., 30(3), 279-289 (2013).
Y. T. Won, Study on Combustion Characteristics and NOx Reduction Using Gas Burner in Cremation Incinerator, Masters Dissertation, Yonsei University, Seoul, Korea (2007).
C. D. Junior, E. C. L. Muniz, and N. J. Cruz, Environment system: A new concept on cremation, J. Sustain. Dev. Energy Water Environ. Syst., 6, 363-380, (2007).
H. K. Kim and Y. S. Kim, A Study on the Spatial Configuration of Korean Crematorium, Masters Dissertation, Hong-ik University, Seoul, Korea (2012).
M. Mari and J. L. Domingo, Toxic emissions from crematories: A review, Environ. Int., 36, 131-137 (2010).
J. I. Dong, Technological Feasibility Study for Eco-friendly Energy Saving by Crematory, University of Seoul, Seoul, Korea (2014)
J. H. Kim, Study to Establish Management Plans of Crematories, Hanseo University, Chungnam, Korea (2007).
N. Takeda, M. Takaoka, T. Fujiwara, H. Takeyama, and S. Eguchi, Measures to prevent emissions of PCDDs/DFs and co-planar PCBs from crematories in Japan, Chemosphere, 43, 763-771 (2001).
K. H. Kim, K. J. Bae, B. K. Choi, and S. H. Hong, Denitrification technology (SCR) trend and nanocatalyst, Korea Ind. Chem. (KIC) News, 10(4), 45-59 (2007).
D. W. Koen and S. H. Hong, Selective catalytic reduction (SCR) technology trends for the nitrogen oxide removal of exhaust gas, Korea Ind. Chem. (KIC) News, 19(5), 12-24 (2016).
M. Nishimura, T. Suzuki, R. Nakanish, and R. Kitamura, Low-NOx combustion under high preheated air temperature condition in an industrial furnace, Energy Convers. Manag., 38(10-13), 1353-1363 (1997).
Y. T. Won and S. M. Lee, Energy efficiency improvement and field scale study of crematory using computation fluid dynamics, Appl. Chem. Eng., 30(1), 95-101 (2019).
N. Takeda, M. Takaoka, T. Fujiwara, H. Takeyama, and S Eguchi, PCDDs/DFs emissions from crematories in Japan, Chemosphere, 40, 575-586 (2000).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.