최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기공업화학 = Applied chemistry for engineering, v.30 no.5, 2019년, pp.615 - 619
정민지 (서울과학기술대학교 화공생명공학과) , 유계상 (서울과학기술대학교 화공생명공학과)
Statistical design of experiments was performed to optimize MOF-235 synthesis process. Concentrations of terephthalic acid (TPA), iron (III) chloride hexahydrate, N,N-dimethylformamide (DMF) and ethanol were important factors to develop the crystal structure of MOF-235. MOF-235 was synthesized with ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
MOFs 구조의 장점은 무엇인가? | 최근 여러 가지 소재 분야에서 각광을 받고 있는 metal organic frameworks (MOFs)은 금속이온 또는 금속 클러스터와 유기 리간드 (ligand) 사이의 공유결합으로 1~3 차원의 결정 구조를 형성하여 높은 결정성과 다양한 기공크기 및 넓은 비표면적 가진 새로운 종류의 화합물질이다[1]. MOFs 구조는 합성에 사용되는 유기 리간드 물질과 금속 성분에 따라 조절할 수 있는 장점이 있다[2]. 또한 기존에 사용되던 한 가지 금속과 유기 리간드의 조합에서 벗어나 금속이온을 혼합하거나 복수의 유기 리간드 및 새로운 작용기를 도입하여 다양한 구조와 기능을 가지는 MOFs을 합성하기 위한 연구가 진행되고 있다[3,4]. | |
metal organic frameworks는 무엇인가? | 최근 여러 가지 소재 분야에서 각광을 받고 있는 metal organic frameworks (MOFs)은 금속이온 또는 금속 클러스터와 유기 리간드 (ligand) 사이의 공유결합으로 1~3 차원의 결정 구조를 형성하여 높은 결정성과 다양한 기공크기 및 넓은 비표면적 가진 새로운 종류의 화합물질이다[1]. MOFs 구조는 합성에 사용되는 유기 리간드 물질과 금속 성분에 따라 조절할 수 있는 장점이 있다[2]. | |
최근의 metal organic frameworks 연구 추세는 어떠한가? | MOFs 구조는 합성에 사용되는 유기 리간드 물질과 금속 성분에 따라 조절할 수 있는 장점이 있다[2]. 또한 기존에 사용되던 한 가지 금속과 유기 리간드의 조합에서 벗어나 금속이온을 혼합하거나 복수의 유기 리간드 및 새로운 작용기를 도입하여 다양한 구조와 기능을 가지는 MOFs을 합성하기 위한 연구가 진행되고 있다[3,4]. 이와 같이 MOFs의 비표면적, 기공크기 및 작용기를 조절할 수 있으므로 촉매반응[5-7], 기체 흡착[8,9], 기체 분리[10,11] 등 다양한 분야에 서 기존의 메조기공의 실리카나 제올라이트를 대체할 수 있을 것으로 여겨진다. |
O. M. Yaghi, M. O'Keeffe, N. W. Ockwig, H. K. Chae, M. Eddaoudi, and J. Kim, Reticular synthesis and the design of new materials, Nature, 423, 705-714 (2003).
N. Stock and S. Biswas, Synthesis of metal-organic frameworks (MOFs): Routes to various MOF topologies, morphologies, and composites, Chem. Rev., 1122, 933-969 (2012),
Z. Wang and S. M. Cohen, Postsynthetic modification of metal-organic frameworks, Chem. Soc. Rev., 38, 1315-1329(2009).
Y. F. Song and L. Cronin, Postsynthetic covalent modification of metal-organic framework (MOF) materials, Angew. Chem. Int. Ed., 47, 4635-4637 (2008).
X. Li, J. Zhang, and W. Li, MOF-derived nitrogen-doped porous carbon as metal-free catalysts for acetylene hydrochlorination, J. Ind. Eng. Chem., 44, 146-154 (2016).
A. H. Chughtai, N. Ahmad, H. A. Younus, A. Laypkov, and F. Verpoort, Metal-organic frameworks: Versatile heterogeneous catalysts for efficient catalytic organic transformations, Chem. Soc. Rev., 44, 6804-6849 (2015).
J. Kim, S. N. Kim, H. G. Jang, G. Seo, and W. S. Ahn, $CO_2$ cycloaddition of styrene oxide over MOF catalysts, Appl. Catal. A, 453, 175-180 (2013).
M. Anbia and S. Sheykhi, Preparation of multi-walled carbon nanotube incorporated MIL-53-Cu composite metal-organic framework with enhanced methane sorption, J. Ind. Eng. Chem., 19, 1583-1586 (2013).
K. Adil, Y. Belmabkhout, R. S. Pillai, A. Cadiau, P. M. Bhatt, A. H. Assen, G. Maurin, and M. Eddaoudi, Gas/vapour separation using ultra-microporous metal-organic frameworks: Insights into the structure/separation relationship, Chem. Soc. Rev., 46, 3402-3430 (2017).
Y.-R. Lee, S.-M. Cho, and W.-S. Ahn, Effects of polydimethyl- siloxane coating of Ni-MOF-74 on CH4 storage, Korean J. Chem. Eng., 35, 1542-1546 (2018).
N. Jiang, Z. Deng, S. Liu, C. Tang, and G. Wang, Synthesis of metal organic framework (MOF-5) with high selectivity for $CO_2/N_2$ separation in flue gas by maximum water concentration approach, Korean J. Chem. Eng., 33, 2747-2755 (2016).
A. C. Sudik, A. P. Cote, and O.M. Yaghi, Metal-organic frameworks based on trigonal prismatic building blocks and the new "acs" topology, Inorg. Chem., 44, 2998-3000 (2005).
M. Anbia, V. Hoseini, and S. Sheykhi, Sorption of methane, hydrogen and carbon dioxide on metal-organic framework, iron terephthalate (MOF-235), J. Ind. Eng. Chem., 18, 1149-1152 (2012).
E. Haque, J. W. Jun, and S. H. Jhung, Adsorptive removal of methyl orange and methylene blue from aqueous solution with a metal-organic framework material, iron terephthalate (MOF-235), J. Hazard. Mater., 185, 507-511 (2011).
N. T. Tran, D. Kim, K. S. Yoo, and J. Kim, Synthesis of Cu-doped MOF-235 for the degradation of methylene blue under visible light irradiation, Bull. Korean Chem. Soc., 40, 112-117 (2019).
X. Tao, C. Sun, Y. Han, L. Huang, and D. Xu, The plasma assisted preparation of Fe-MOFs with high adsorption capacity, Cryst. Eng. Comm., 21, 2541-2550 (2019).
R. E. Walpole, K. E. Ye, Raymond, H. Myers, and S. L. Myers, Probability and Statistics for Engineers and Scientists, 9th ed., 639-652, Prentice Hall, Boston, USA (2012).
R. L. Mason, R. F. Gunst, and J. L. Hess, Statistical Design and Analysis of Experiments, with Applications to Engineering and Science, 2nd ed., 568-597, Wiley-Interscience, New Jersey, USA (2003).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.